Router Bits

  1. Undersized Router Bits-1/4 Inch  Shank
    Undersized Router Bits-1/4 Inch Shank
    21 Review(s)
    Slightly undersized to cut tight-fitting grooves and dadoes for plywood that measures less than its stated nominal thickness.

    Starting at: From $13.99

  2. Undersized Router Bits-1/2 Inch  Shank
    Undersized Router Bits-1/2 Inch Shank
    21 Review(s)
    Slightly undersized to cut tight-fitting grooves and dadoes for plywood that measures less than its stated nominal thickness.

    Starting at: From $13.99

  3. Roundover/ Beading Router Bits-1/2 Inch  Shank
    Roundover/ Beading Router Bits-1/2 Inch Shank
    13 Review(s)
    These dual-purpose bits include an additional smaller bearing that can be installed when a beaded edge is desired.

    Starting at: From $22.99

  4. Rockler Table Top Edge Bit
    Rockler Table Top Edge Bit
    Cuts in a full 1" from the edge, offering a generous profile for table edges and moldings.
  5. Rockler Straight Router Bits, 2-Flute, 1/4" Shank
    Rockler Straight Router Bits, 2-Flute, 1/4" Shank
    11 Review(s)
    Cut grooves, dados and rabbets with these precision ground carbide straight bits.

    Starting at: From $13.99

  6. Rockler Straight Router Bits, 2-Flute, 1/2" Shank
    Rockler Straight Router Bits, 2-Flute, 1/2" Shank
    14 Review(s)
    Rout clean, precise dados and mortises with these precision ground carbide straight bits.

    Starting at: From $9.99

  7. Rockler Restoration Beading Router Bits, 1/2" Shank
    Rockler Restoration Beading Router Bits, 1/2" Shank
    2 Review(s)
    These beading bits feature a smooth half-round profile—perfect for beaded moldings and for bull-nosed edges.

    Starting at: From $26.99

  8. Rockler 45 Degree Chamfer Router Bits-1/2 Inch Shank
    Rockler 45 Degree Chamfer Router Bits-1/2 Inch Shank
    5 Review(s)
    Among the most classic edge treatments available—a simple 45 degree angle to add both softness and definition.

    Starting at: From $25.99

  9. Rockler 3-Pc. Roundover/Beading Bit Set
    Rockler 3-Pc. Roundover/Beading Bit Set
    4 Review(s)
    Three of our most popular round over bits—all convertible to beading bits with the included 3/8" bearings.
  10. 21515 and 38973 Raised Panel Router Bit - Straight  Horizontal Bit
    Raised Panel Router Bit - Straight - Horizontal
    4 Review(s)
    Horizontal panel-raising bits cut more smoothly than vertical bits, and they also allow you to raise curved panels.

    Starting at: From $64.99

  11. Horizontal Raised Panel Router Bits
    Raised Panel Router Bit - Ogee - Horizontal
    2 Review(s)
    Horizontal panel raising bits cut more smoothly than vertical bits, and they also allow you to raise curved panels.

    Starting at: From $64.99

  12. 2 Flute Trim Router Bit
    Piloted Flush Trim Bits 1/4" Shank
    Use these bits to trim veneers and solid stock flush with the underlying substrate.

    Starting at: From $15.99

  13. Ogee Base Molding Bit
    Ogee Base Molding Bit
    Ideal for profiling the top edge of base moldings, as well as for table tops and other decorative edges.
  14. Hinge Mortising Router Bit 3/4" Diameter x 3/4" Height (1/2" Shank)
    Hinge Mortising Router Bit 3/4" Diameter x 3/4" Height (1/2" Shank)
    1 Review(s)
    The shorter length of this mortising bit allows you to pull it way back into the baseplate for routing shallow recesses.
  15. Hinge Mortising Router Bit 1/2" Diameter x 3/4" Height (1/4" Shank)
    Hinge Mortising Router Bit 1/2" Diameter x 3/4" Height (1/4" Shank)
    1 Review(s)
    The shorter length of this mortising bit allows you to pull it way back into the baseplate for routing shallow recesses.
  16. Hinge Mortising Router Bit 1/2" Diameter x 3/4" Height (1/2" Shank)
    Hinge Mortising Router Bit 1/2" Diameter x 3/4" Height (1/2" Shank)
    1 Review(s)
    The shorter length of this mortising bit allows you to pull it way back into the baseplate for routing shallow recesses.
  17. Freud Round Nose Bits-Optional Sizes
    Freud Round Nose Bits-Optional Sizes
    2 Review(s)
    Ideal for fluted columns, finger pulls and sign lettering.

    Starting at: From $19.97

  18. Freud Rabbeting Bits With Bearings
    Freud Rabbeting Bits With Bearings
    2 Review(s)
    Includes multiple bearings for a range of rabbeting depths.

    Starting at: From $42.47

  19. Freud Quadra-Cut Beading Bit
    Freud Quadra-Cut Beading Bit
    3 Review(s)
    Two primary cutters shear upward for a smooth finish, while two smaller cutters shear downward to eliminate splintering on the face.
  20. Freud 5-Piece Up Cut Spiral Router Bit Set
    Freud 5-Piece Up Cut Spiral Router Bit Set
    This incredible value packs five solid carbide up-cut spiral router bits into one neat wooden case: 3/16", 1/4", 5/16", 3/8" and 1/2".
  21. Freud 13 Piece Super Bit Set
    Freud 13 Piece Super Bit Set
    2 Review(s)
    Offers a wide variety of router bits, including "V" groove, flush trim, chamfer and dovetail bits.
  22. Flooring Router Bit Set, Nail Slot
    Flooring Router Bit Set, Nail Slot
    Mill your own hardwood flooring with this specially-designed tongue and groove bit set.
  23. 40362   3/4' Edge V-Groove Bit, 1/2' Shank (Convex) and 40368   3/4' Edge V-Groove Bit, 1/2' Shank (Concave)
    Edge V-Groove Bit, 1/2" Shank
    1 Review(s)
    Interlocking profiles self-align and increase available gluing surface, making them ideal for edge joining boards.

    Starting at: From $39.99

  24. Edge Beading Router Bits-1/2" Shank
    Edge Beading Router Bits-1/2" Shank
    4 Review(s)
    With its integral guide bearing, this beading bit is easy to use either freehand or in a router table.

    Starting at: From $23.99

Here are some key terms you'll want to know in selecting the right router bit for your project.

Profile: The shape of the bit's edge and the contour of the resulting cut. Common profiles include:

Straight bits make straight cuts such as dadoes and grooves.
Rabbeting bits cut a notch along the edge of a workpiece.
Flush-trim bits trim the edge of one workpiece to match the edge of another.
Chamfer bits cut a bevel on the edge of a workpiece. Round-over bits soften the edge of a workpiece. They come in different radiuses.
Beading bits cut a rounded decorative edge.
Molding bits combine edge-forming profiles into one bit.
Specialty bits – such as dovetail, stile-and-rail, and panel-raising bits – are used to do specific tasks.

Shank: The part of the bit that is secured in the router. The two most common shank sizes are 1/4" and 1/2".

Pilot bearing: On some router bits, the free-rotating metal wheel above or below the cutter that runs along the workpiece edge, acting as a guide.

HSS: High-speed steel.

Carbide: Material often used to make cutting tips on router bits. It's harder than steel and holds an edge longer.

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X