Router Bits

  1. Core Box Router Bits-1/2"  Shank
    Core Box Router Bits-1/2" Shank
    5 Review(s)
    This classic fluting cutter cuts a round-bottom groove—ideal for decorative columns, finger pulls, sill drip rails and more.

    Starting at: From $23.99

  2. Undersized Router Bits-1/2 Inch  Shank
    Undersized Router Bits-1/2 Inch Shank
    21 Review(s)
    Slightly undersized to cut tight-fitting grooves and dadoes for plywood that measures less than its stated nominal thickness.

    Starting at: From $13.99

  3. Freud 97-252, 3-Piece Door Set
    Freud 97-252, 3-Piece Door Set
    2 Review(s)
    Contains ogee cope and stick set and a coved raised panel cutter for creating beautiful custom raised panel doors!
  4. Pattern Flush Trim Router Bit- 1/2 Inch Shank
    Pattern Flush Trim Router Bit- 1/2 Inch Shank
    21 Review(s)
    Fast, smooth flush-cutting capabilities.

    Starting at: From $26.99

  5. Roundover/ Beading Router Bits-1/4 Inch Shank
    Roundover/ Beading Router Bits-1/4 Inch Shank
    13 Review(s)
    These dual-purpose bits include an additional smaller bearing that can be installed when a beaded edge is desired.

    Starting at: From $22.99

  6. 5/8" Signmaking Carbide Router Bit, 1/4" Shank
  7. Rabbeting Router Bit
    Sale
    Rabbeting Router Bit
    15 Review(s)
    Includes a set of four bearings to achieve the following cutting depths: 5/16", 3/8", 7/16" and 1/2".

    Regular Price: $39.99

    Special Price $27.99

  8. Rockler 4-Pc. Straight Bit Set
    Rockler 4-Pc. Straight Bit Set
    5 Review(s)
    Includes four of the most popular straight bit sizes for dados, grooves and rabbets.
  9. Rockler 45 Degree Chamfer Router Bits-1/2 Inch Shank
    Rockler 45 Degree Chamfer Router Bits-1/2 Inch Shank
    5 Review(s)
    Among the most classic edge treatments available—a simple 45 degree angle to add both softness and definition.

    Starting at: From $25.99

  10. 40431 - 2-Piece Rail/Stile Shaker Cutter Bit Set
    New
    2-Piece Rail/Stile Shaker Cutter Bit Set
    A distinctive chamfered edge makes this rail and stile set an excellent candidate for Shaker-style doors and drawers.
  11. Pattern Flush Trim Router Bit 3/4'' Diameter x 1-1/4'' Height
    Pattern Flush Trim Router Bit 3/4'' Diameter x 1-1/4'' Height
    21 Review(s)
    With the quide bearing mounted at the top, this bit provides excellent visibility of the cut line when using templates.
  12. 2 Flute Trim Router Bit
    Piloted Flush Trim Bits 1/2" Shank
    Use these router bits to trim veneers and solid stock flush with the underlying substrate or cabinet parts.

    Starting at: From $17.99

  13. 2 Flute Trim Router Bit
    Piloted Flush Trim Bits 1/4" Shank
    Use these bits to trim veneers and solid stock flush with the underlying substrate.

    Starting at: From $15.99

  14. Rockler Bullnose Radius Bits
    Rockler Bullnose Radius Bits
    Cut perfectly rounded edges in a snap!

    Starting at: From $29.99

  15. Classical Stile and Rail Router Bit Set
    New
    Classical Stile and Rail Router Bit Set
    4 Review(s)
    Build sturdy, beautiful frame and panel doors with minimal setup and absolute precision!
  16. Finger Joint Router Bit
    Finger Joint Router Bit
    1 Review(s)
    This bit creates a bond stronger than the wood itself—ideal for splicing boards end-to-end.
  17. 1-1/4'' Dish Carving Router Bit
    Exclusive
    1-1/4'' Dish Carving Router Bit
    Make custom bowls and trays of all shapes and sizes with this bearing-guided Dish Carving Router Bit!
  18. 40432 - Complete 3-Piece Shaker Raised Panel Bit Set
    Shaker Raised Panel 3-Piece Bit Set
    Combines a rail and stile set with a panel raiser for building beautiful Shaker raised panel doors!
  19. 40362   3/4' Edge V-Groove Bit, 1/2' Shank (Convex) and 40368   3/4' Edge V-Groove Bit, 1/2' Shank (Concave)
    Edge V-Groove Bit, 1/2" Shank
    1 Review(s)
    Interlocking profiles self-align and increase available gluing surface, making them ideal for edge joining boards.

    Starting at: From $39.99

  20. Rockler 5-Pc. Starter Bit Set
    Rockler 5-Pc. Starter Bit Set
    Get five of the most commonly used router bits in woodworking for one low price!
  21. Rockler Flush Door Trimming Bit
    Rockler Flush Door Trimming Bit
    6 Review(s)
    Top-mounted guide bearing lets you hand rout with templates in full view.
  22. Round Rail and Stile Router Bit Set
    Round Rail and Stile Router Bit Set
    5 Review(s)
    Build beautiful frame and panel doors with minimal setup and absolute precision!
  23. Rockler Bead & Cove Bits for Canoe Building
    Rockler Bead & Cove Bits for Canoe Building
    4 Review(s)
    A dual-purpose router bit that cuts both beads and coves, which then fit together to create curving forms!

    Starting at: From $49.99

  24. Includes one arbor, two 22mm bearings, and two cutters. Make a Groove bit (shown) or a Tongue bit by attaching the second cutter.
    Rockler Tongue and Groove Router Bit, 3/8" Cutter Width X 1/4" Cutter Height, 1/4" Shank
    10 Review(s)
    Convertible arbor can be configured to cut both the tongue and groove for 3/4" stock.

Here are some key terms you'll want to know in selecting the right router bit for your project.

Profile: The shape of the bit's edge and the contour of the resulting cut. Common profiles include:

Straight bits make straight cuts such as dadoes and grooves.
Rabbeting bits cut a notch along the edge of a workpiece.
Flush-trim bits trim the edge of one workpiece to match the edge of another.
Chamfer bits cut a bevel on the edge of a workpiece. Round-over bits soften the edge of a workpiece. They come in different radiuses.
Beading bits cut a rounded decorative edge.
Molding bits combine edge-forming profiles into one bit.
Specialty bits – such as dovetail, stile-and-rail, and panel-raising bits – are used to do specific tasks.

Shank: The part of the bit that is secured in the router. The two most common shank sizes are 1/4" and 1/2".

Pilot bearing: On some router bits, the free-rotating metal wheel above or below the cutter that runs along the workpiece edge, acting as a guide.

HSS: High-speed steel.

Carbide: Material often used to make cutting tips on router bits. It's harder than steel and holds an edge longer.

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X