Router Bits

  1. Specialty Molding Router Bit for Decorative Edges

    Starting at: From $37.99

  2. Rockler 45 Degree Chamfer Router Bits-1/4 Inch Shank
    Rockler 45 Degree Chamfer Router Bits-1/4 Inch Shank
    5 Review(s)
    Among the most classic edge treatments available—a simple 45 degree angle to add both softness and definition.

    Starting at: From $24.99

  3. Undersized Router Bits-1/4 Inch  Shank
    Undersized Router Bits-1/4 Inch Shank
    21 Review(s)
    Slightly undersized to cut tight-fitting grooves and dadoes for plywood that measures less than its stated nominal thickness.

    Starting at: From $13.99

  4. Full Bead Router Bit
    Full Bead Router Bit
    Features dual bearings for added versatility—perfect for creating beaded edges on cabinets and fine furniture.
  5. Solid Carbide Sign Making Router Bit
    Solid Carbide Sign Making Router Bit
    1 Review(s)
    Cuts a deep channel that provides crisp definition for sign lettering and decorative V-grooving effects.
  6. Onsrud Down-Cut Spiral Bits
    Onsrud Down-Cut Spiral Bits
    Down-shear spiral action prevents chip-out and fuzzing at the edge of the cut—ideal for cutting clean dados, grooves and rabbets.

    Starting at: From $19.39

  7. Classic Fluted Plunge Router Bit, 2 sizes
    Classic Fluted Plunge Router Bit, 2 sizes
    3 Review(s)
    Can be used for template routing in the middle of a workpiece, or mounted in a table for edge treatments.

    Starting at: From $37.99

  8. 1/4" Shank Rabbeting Bit Set
    1/4" Shank Rabbeting Bit Set
    Includes a set of four bearings to achieve the following cutting depths: 5/16", 3/8", 7/16" and 1/2".
  9. Round Over/Beading Bit Set - 1/4" Shank
    Round Over/Beading Bit Set - 1/4" Shank
    Get six router bit profiles in one handy set!
  10. 3/4" Diameter X 1" High Molding Bit
    3/4" Diameter X 1" High Molding Bit
    1 Review(s)
    Recommended for crown molding, window casing/sills, baseboards, picture frames, and chair rails.
  11. Edge Beading Router Bit-1/4" Shank
    Edge Beading Router Bit-1/4" Shank
    4 Review(s)
    With its integral guide bearing, this beading bit is easy to use either freehand or in a router table.

    Starting at: From $34.99

  12. Cove Router Bits-1/4 Inch Shank
    Cove Router Bits-1/4 Inch Shank
    2 Review(s)
    Simple cove provides an elegant edge for drawer fronts, cabinet doors, furniture pieces and molding trim.

    Starting at: From $24.99

  13. Dovetail Router Bits-1/4" Shank
    Dovetail Router Bits-1/4" Shank
    2 Review(s)
    The dovetail joint remains a distinctive mark of quality in fine cabinetry and furniture, and these router bits more than live up to that reputation.

    Starting at: From $13.99

  14. Freud # 99-472 Beadboard Bit System
    Freud # 99-472 Beadboard Bit System
    Use these two bits to create handsome beaded tongue and groove paneling in stock from 3/8" to 3/4" thick.

    Starting at: From $18.97

  15. Classic Roman Ogee Router Bits-1/4" Shank
    Classic Roman Ogee Router Bits-1/4" Shank
    2 Review(s)
    With its corresponding bead and cove, this profile embodies the meaning of classical design.

    Starting at: From $39.99

  16. 1/4''Miniature Roundover Router Bit
    1/4''Miniature Roundover Router Bit
    Miniature 8mm bearing allows you to get deeper into the corners of small scale projects, minimizing hand work.
  17. Roman Ogee Router Bits-1/4" Shank
    Roman Ogee Router Bits-1/4" Shank
    1 Review(s)
    A smooth uninterrupted ogee curve—perfect for edge treatments on table tops and more.

    Starting at: From $31.99

  18. Rockler Flush Trim V-Groove Router Bit, 1/2" Diameter x 1" Height - 1/4" Shank
  19. Miniature Chamfer Router Bit
    Miniature Chamfer Router Bit
    Undersized 8mm bearing cuts deep into corners for a neat finished look on smaller projects.
  20. Back Cutter Router Bit
    Back Cutter Router Bit
    Makes a relief cut on the back side of a flat or raised panel so it fits into the groove of your door frame.
  21. Miniature Roman Ogee Router Bit
    Miniature Roman Ogee Router Bit
    1 Review(s)
    Perfectly scaled for smaller projects such as jewelry boxes, music boxes and more.
  22. Miniature Classic Roman Ogee Router Bit
    Miniature Classic Roman Ogee Router Bit
    Small scale projects call for small scale router bits. This bit is the perfect fit for jewelry boxes and other fine pieces.
  23. Hinge Mortising Router Bit 1/2" Diameter x 3/4" Height (1/4" Shank)
    Hinge Mortising Router Bit 1/2" Diameter x 3/4" Height (1/4" Shank)
    1 Review(s)
    The shorter length of this mortising bit allows you to pull it way back into the baseplate for routing shallow recesses.
  24. 1-1/16" Diameter X 3/4" High Drawer Lock Bit
    1-1/16" Diameter X 3/4" High Drawer Lock Bit
    5 Review(s)
    Increases gluing surface and provides a strong, mechanical locking action for drawer box corner joints.

Here are some key terms you'll want to know in selecting the right router bit for your project.

Profile: The shape of the bit's edge and the contour of the resulting cut. Common profiles include:

Straight bits make straight cuts such as dadoes and grooves.
Rabbeting bits cut a notch along the edge of a workpiece.
Flush-trim bits trim the edge of one workpiece to match the edge of another.
Chamfer bits cut a bevel on the edge of a workpiece. Round-over bits soften the edge of a workpiece. They come in different radiuses.
Beading bits cut a rounded decorative edge.
Molding bits combine edge-forming profiles into one bit.
Specialty bits – such as dovetail, stile-and-rail, and panel-raising bits – are used to do specific tasks.

Shank: The part of the bit that is secured in the router. The two most common shank sizes are 1/4" and 1/2".

Pilot bearing: On some router bits, the free-rotating metal wheel above or below the cutter that runs along the workpiece edge, acting as a guide.

HSS: High-speed steel.

Carbide: Material often used to make cutting tips on router bits. It's harder than steel and holds an edge longer.

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X