Router Bits

  1. Rockler Classical Roman Ogee Plunge Bits
    Rockler Classical Roman Ogee Plunge Bits
    1 Review(s)
    This decorative plunge bit is often used to create a faux panel door effect in slab door and drawer fronts.

    Starting at: From $23.99

  2. Rockler Drawer Lock Router Bit
    Sale
    Rockler Drawer Lock Router Bit
    18 Review(s)
    Rout strong, precise corner joints for drawer boxes with just one bit!

    Regular Price: $37.99

    Special Price $26.59

  3. Rockler Keyhole Slot Router Bits
    Rockler Keyhole Slot Router Bits
    7 Review(s)
    This twin-flute cutter captures a screw head for fastening wall hung items. Also used for knock-down furniture.

    Starting at: From $14.99

  4. Roundover/ Beading Router Bits-1/2 Inch  Shank
    Roundover/ Beading Router Bits-1/2 Inch Shank
    13 Review(s)
    These dual-purpose bits include an additional smaller bearing that can be installed when a beaded edge is desired.

    Starting at: From $22.99

  5. Rockler Straight Router Bits, 2-Flute, 1/4" Shank
    Rockler Straight Router Bits, 2-Flute, 1/4" Shank
    11 Review(s)
    Cut grooves, dados and rabbets with these precision ground carbide straight bits.

    Starting at: From $13.99

  6. Roundover/ Beading Router Bits-1/4 Inch Shank
    Roundover/ Beading Router Bits-1/4 Inch Shank
    13 Review(s)
    These dual-purpose bits include an additional smaller bearing that can be installed when a beaded edge is desired.

    Starting at: From $22.99

  7. Rabbeting Router Bit
    Sale
    Rabbeting Router Bit
    15 Review(s)
    Includes a set of four bearings to achieve the following cutting depths: 5/16", 3/8", 7/16" and 1/2".

    Regular Price: $39.99

    Special Price $27.99

  8. Rockler 45 Degree Chamfer Router Bits-1/2 Inch Shank
    Rockler 45 Degree Chamfer Router Bits-1/2 Inch Shank
    5 Review(s)
    Among the most classic edge treatments available—a simple 45 degree angle to add both softness and definition.

    Starting at: From $25.99

  9. 1-1/4'' Dish Carving Router Bit
    Exclusive
    1-1/4'' Dish Carving Router Bit
    Make custom bowls and trays of all shapes and sizes with this bearing-guided Dish Carving Router Bit!
  10. Rockler 5-Pc. Starter Bit Set
    Rockler 5-Pc. Starter Bit Set
    Get five of the most commonly used router bits in woodworking for one low price!
  11. Cuts both the front and the back in one pass for perfectly fitting rails and stiles
    Cove Raised Panel Bit P602
    Guide bearing and horizontal orientation allow you to raise panels for both straight and arched top doors!
  12. Cove Router Bits-1/2 Inch Shank
    Cove Router Bits-1/2 Inch Shank
    2 Review(s)
    Simple cove provides an elegant edge for drawer fronts, cabinet doors, furniture pieces and molding trim.

    Starting at: From $25.99

  13. Core Box Router Bits-1/4"  Shank
    Core Box Router Bits-1/4" Shank
    5 Review(s)
    This classic fluting cutter cuts a round-bottom groove—ideal for decorative columns, finger pulls, sill drip rails and more.

    Starting at: From $17.99

  14. Cuts both the front and the back in one pass for perfectly fitting rails and stiles
    Straight Panel Bit with Back Cutter P636
    Guide bearing and horizontal orientation allow you to raise panels for both straight and arched top doors!
  15. Rockler 3-Pc. Roundover/Beading Bit Set
    Rockler 3-Pc. Roundover/Beading Bit Set
    4 Review(s)
    Three of our most popular round over bits—all convertible to beading bits with the included 3/8" bearings.
  16. Dovetail Router Bits-1/2" Shank
    Dovetail Router Bits-1/2" Shank
    2 Review(s)
    The dovetail joint remains a distinctive mark of quality in fine cabinetry and furniture, and these router bits more than live up to that reputation.

    Starting at: From $14.99

  17. Cuts both the front and the back in one pass for perfectly fitting rails and stiles
    Sale
    Ogee Raised Panel Bit with Back Cutter P605
    Guide bearing and horizontal orientation allow you to raise panels for both straight and arched top doors!

    Regular Price: $137.79

    Special Price $103.34

  18. 4 Piece 8mm Dovetail Router Bit Upgrade
    4 Piece 8mm Dovetail Router Bit Upgrade
    1 Review(s)
    Thicker 8mm shanks help to reduce chatter for tighter fitting dovetails and box joints.
  19. Adds an attractive bead profile to furniture and millwork
    Sale
    Freud 36-119, 3/16'' Radius Beading Bit
    Adds an attractive beaded edge to your cabinetry and furniture components.

    Regular Price: $32.97

    Special Price $19.99

  20. 14° Dovetail Pattern Router Bit
    14° Dovetail Pattern Router Bit
    3 Review(s)
    A dovetail bit with an integral guide bearing for extra-smooth cutting when used with dovetail jigs.
  21. 1/8'' Double Flute Straight Bit
    Sale
    1/8'' Double Flute Straight Bit
    2 Review(s)
    If you're looking for a workhorse router bit for your workshop, look no further than this 1/8" Double Flute Straight Bit!

    Regular Price: $20.99

    Special Price $14.69

  22. Freud Rabbeting Bits With Bearings
    Freud Rabbeting Bits With Bearings
    2 Review(s)
    Includes multiple bearings for a range of rabbeting depths.

    Starting at: From $42.47

  23. Freud #30-110 Cove Bit, 1/4'' Rad. x 1'' Dia. x 1/2'' H x 1/2'' Sh.
    Freud #30-110 Cove Bit, 1/4'' Rad. x 1'' Dia. x 1/2'' H x 1/2'' Sh.
    Create smooth, classic cove profiles with Freud cove bits, featuring a shear angle that slices wood like a finely tuned hand plane.
  24. 1'' Dish Carving Router Bit, 1/4" Shank
    1'' Dish Carving Router Bit, 1/4" Shank
    3 Review(s)
    Rout wide flat-bottomed recesses with a practical and attractive radius at the bottom corner.

Here are some key terms you'll want to know in selecting the right router bit for your project.

Profile: The shape of the bit's edge and the contour of the resulting cut. Common profiles include:

Straight bits make straight cuts such as dadoes and grooves.
Rabbeting bits cut a notch along the edge of a workpiece.
Flush-trim bits trim the edge of one workpiece to match the edge of another.
Chamfer bits cut a bevel on the edge of a workpiece. Round-over bits soften the edge of a workpiece. They come in different radiuses.
Beading bits cut a rounded decorative edge.
Molding bits combine edge-forming profiles into one bit.
Specialty bits – such as dovetail, stile-and-rail, and panel-raising bits – are used to do specific tasks.

Shank: The part of the bit that is secured in the router. The two most common shank sizes are 1/4" and 1/2".

Pilot bearing: On some router bits, the free-rotating metal wheel above or below the cutter that runs along the workpiece edge, acting as a guide.

HSS: High-speed steel.

Carbide: Material often used to make cutting tips on router bits. It's harder than steel and holds an edge longer.

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X