Router Bits

  1. Shutter Bead Router Bit
    Shutter Bead Router Bit
    Adds a subtle decorative touch to the rails and stiles of your custom shutters.
  2. Edge Beading Router Bits-1/2" Shank
    Edge Beading Router Bits-1/2" Shank
    4 Review(s)
    With its integral guide bearing, this beading bit is easy to use either freehand or in a router table.

    Starting at: From $23.99

  3. Classic Fluted Plunge Router Bit, 2 sizes
    Classic Fluted Plunge Router Bit, 2 sizes
    3 Review(s)
    Can be used for template routing in the middle of a workpiece, or mounted in a table for edge treatments.

    Starting at: From $37.99

  4. 30 Degree Chamfer Bead Profile Bit
    30 Degree Chamfer Bead Profile Bit
    2 Review(s)
    Routs a simple, flat field that looks great with Shaker style furniture.
  5. Freud Traditional Beading Bits
    Freud Traditional Beading Bits
    3 Review(s)
    A classic beading bit commonly used to match the profiles in historic homes.

    Starting at: From $35.97

  6. Edge Beading Router Bit-1/4" Shank
    Edge Beading Router Bit-1/4" Shank
    4 Review(s)
    With its integral guide bearing, this beading bit is easy to use either freehand or in a router table.

    Starting at: From $34.99

  7. Freud 99-863 Cutters Double Side Door Set
    Freud 99-863 Cutters Double Side Door Set
    Works with corresponding Freud stile and rail bit set to create doors with decorative profiles on both faces.
  8. Freud 99-864 Cutters Double Side Door Set
    Freud 99-864 Cutters Double Side Door Set
    Works with corresponding Freud stile and rail bit set to create doors with decorative profiles on both faces.
  9. Freud 99-861 Cutters Double Sided Door Set
    Freud 99-861 Cutters Double Sided Door Set
    Works with corresponding Freud stile and rail bit set to create doors with decorative profiles on both faces.
  10. Freud 99-860 Cutters Double Side Set
    Freud 99-860 Cutters Double Side Set
    Works with corresponding Freud stile and rail bit set to create doors with decorative profiles on both faces.

Here are some key terms you'll want to know in selecting the right router bit for your project.

Profile: The shape of the bit's edge and the contour of the resulting cut. Common profiles include:

Straight bits make straight cuts such as dadoes and grooves.
Rabbeting bits cut a notch along the edge of a workpiece.
Flush-trim bits trim the edge of one workpiece to match the edge of another.
Chamfer bits cut a bevel on the edge of a workpiece. Round-over bits soften the edge of a workpiece. They come in different radiuses.
Beading bits cut a rounded decorative edge.
Molding bits combine edge-forming profiles into one bit.
Specialty bits – such as dovetail, stile-and-rail, and panel-raising bits – are used to do specific tasks.

Shank: The part of the bit that is secured in the router. The two most common shank sizes are 1/4" and 1/2".

Pilot bearing: On some router bits, the free-rotating metal wheel above or below the cutter that runs along the workpiece edge, acting as a guide.

HSS: High-speed steel.

Carbide: Material often used to make cutting tips on router bits. It's harder than steel and holds an edge longer.

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X