Router Bits

  1. Roundover/ Beading Router Bits-1/2 Inch  Shank
    Roundover/ Beading Router Bits-1/2 Inch Shank
    13 Review(s)
    These dual-purpose bits include an additional smaller bearing that can be installed when a beaded edge is desired.

    Starting at: From $22.99

  2. Rockler Bullnose Radius Bits
    Rockler Bullnose Radius Bits
    Cut perfectly rounded edges in a snap!

    Starting at: From $29.99

  3. Dovetail Router Bits-1/2" Shank
    Dovetail Router Bits-1/2" Shank
    2 Review(s)
    The dovetail joint remains a distinctive mark of quality in fine cabinetry and furniture, and these router bits more than live up to that reputation.

    Starting at: From $14.99

  4. Rockler Bead & Cove Bits for Canoe Building
    Rockler Bead & Cove Bits for Canoe Building
    4 Review(s)
    A dual-purpose router bit that cuts both beads and coves, which then fit together to create curving forms!

    Starting at: From $49.99

  5. Cove Router Bits-1/2 Inch Shank
    Cove Router Bits-1/2 Inch Shank
    2 Review(s)
    Simple cove provides an elegant edge for drawer fronts, cabinet doors, furniture pieces and molding trim.

    Starting at: From $25.99

  6. 40431 - 2-Piece Rail/Stile Shaker Cutter Bit Set
    New
    2-Piece Rail/Stile Shaker Cutter Bit Set
    A distinctive chamfered edge makes this rail and stile set an excellent candidate for Shaker-style doors and drawers.
  7. 30° Chamfer Router Bit
    30° Chamfer Router Bit
    1 Review(s)
    The perfect bevel angle for six-sided objects.
  8. Dovetail Router Bits-1/4" Shank
    Dovetail Router Bits-1/4" Shank
    2 Review(s)
    The dovetail joint remains a distinctive mark of quality in fine cabinetry and furniture, and these router bits more than live up to that reputation.

    Starting at: From $13.99

  9. Roman Ogee Router Bits-1/2" Shank
    Roman Ogee Router Bits-1/2" Shank
    A smooth uninterrupted ogee curve—perfect for edge treatments on table tops and more.

    Starting at: From $31.99

  10. Freud Traditional Beading Bits
    Freud Traditional Beading Bits
    3 Review(s)
    A classic beading bit commonly used to match the profiles in historic homes.

    Starting at: From $35.97

  11. 15° Chamfer Router Bit
    15° Chamfer Router Bit
    1 Review(s)
    A subtle bevel that works well for laminate trimming, edge treatments and 12-sided objects.
  12. 22.5° Chamfer  Router Bit
    22.5° Chamfer Router Bit
    2 Review(s)

    The perfect bevel angle for eight-sided objects and 45° angles in cabinetry and furniture.

  13. Rockler 5-Pc. Starter Bit Set
    Rockler 5-Pc. Starter Bit Set
    Get five of the most commonly used router bits in woodworking for one low price!
  14. 11.25° Chamfer Router Bit
    11.25° Chamfer Router Bit
    1 Review(s)
    A subtle bevel that works well for laminate trimming, edge treatments and 16-sided objects.
  15. 40432 - Complete 3-Piece Shaker Raised Panel Bit Set
    Shaker Raised Panel 3-Piece Bit Set
    Combines a rail and stile set with a panel raiser for building beautiful Shaker raised panel doors!
  16. Drawer Pull Router Bit
    Drawer Pull Router Bit
    This bit can be used to apply a neat finger recess around the edge of doors and drawers, or to rout finger pull stock to be applied separately.

Here are some key terms you'll want to know in selecting the right router bit for your project.

Profile: The shape of the bit's edge and the contour of the resulting cut. Common profiles include:

Straight bits make straight cuts such as dadoes and grooves.
Rabbeting bits cut a notch along the edge of a workpiece.
Flush-trim bits trim the edge of one workpiece to match the edge of another.
Chamfer bits cut a bevel on the edge of a workpiece. Round-over bits soften the edge of a workpiece. They come in different radiuses.
Beading bits cut a rounded decorative edge.
Molding bits combine edge-forming profiles into one bit.
Specialty bits – such as dovetail, stile-and-rail, and panel-raising bits – are used to do specific tasks.

Shank: The part of the bit that is secured in the router. The two most common shank sizes are 1/4" and 1/2".

Pilot bearing: On some router bits, the free-rotating metal wheel above or below the cutter that runs along the workpiece edge, acting as a guide.

HSS: High-speed steel.

Carbide: Material often used to make cutting tips on router bits. It's harder than steel and holds an edge longer.

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X