- 13 Item(s)
- Grid List
Up-spiral design directs chips up and out of mortises and grooves, resulting in a cooler cutter, less burning and a long cutting life.
Starting at: From $17.99
Rout clean, precise dados and mortises with these precision ground carbide straight bits.
Starting at: From $9.99
Cut grooves, dados and rabbets with these precision ground carbide straight bits.
Starting at: From $13.99
This incredible value packs five solid carbide up-cut spiral router bits into one neat wooden case: 3/16", 1/4", 5/16", 3/8" and 1/2".$159.97
Includes four of the most popular straight bit sizes for dados, grooves and rabbets.$59.99
Use these bits to trim veneers and solid stock flush with the underlying substrate.
Starting at: From $15.99
Offers a wide variety of router bits, including "V" groove, flush trim, chamfer and dovetail bits.$220.47
This classic fluting cutter cuts a round-bottom groove—ideal for decorative columns, finger pulls, sill drip rails and more.
Starting at: From $17.99
SaleIdeal for template work, laminate trimming and cutting openings in drywall, paneling and siding!
Regular Price: $9.99
Special Price $4.99
A perfect beginner set for cutting grooves, dados and rabbets—includes four of the most common sizes.$54.99
Down-shear spiral action prevents chip-out and fuzzing at the edge of the cut—ideal for cutting clean dados, grooves and rabbets.
Starting at: From $19.39
Three of our most popular round over bits—all convertible to beading bits with the included 3/8" bearings.$89.99
Use these two bits to create handsome beaded tongue and groove paneling in stock from 3/8" to 3/4" thick.
Starting at: From $18.97
Here are some key terms you'll want to know in selecting the right router bit for your project.
Profile: The shape of the bit's edge and the contour of the resulting cut. Common profiles include:
Straight bits make straight cuts such as dadoes and grooves.
Rabbeting bits cut a notch along the edge of a workpiece.
Flush-trim bits trim the edge of one workpiece to match the edge of another.
Chamfer bits cut a bevel on the edge of a workpiece. Round-over bits soften the edge of a workpiece. They come in different radiuses.
Beading bits cut a rounded decorative edge.
Molding bits combine edge-forming profiles into one bit.
Specialty bits – such as dovetail, stile-and-rail, and panel-raising bits – are used to do specific tasks.
Shank: The part of the bit that is secured in the router. The two most common shank sizes are 1/4" and 1/2".
Pilot bearing: On some router bits, the free-rotating metal wheel above or below the cutter that runs along the workpiece edge, acting as a guide.
HSS: High-speed steel.
Carbide: Material often used to make cutting tips on router bits. It's harder than steel and holds an edge longer.