Router Bits

  1.  Cut a huge variety of dovetails � ideal for use with our Distinctive Series Dovetail Templates.
    Distinctive Series Dovetail Router Bits, 8mm Shank
    2 Review(s)

    8° dovetail angle mimics the look of genuine hand-cut dovetails.

    Starting at: From $17.99

  2. The up-cut design helps keep the mortise clear of chips and shavings while you cut.
    Up-Cut Spiral Mortising Router Bits
    6 Review(s)
    Up-spiral design directs chips up and out of mortises and grooves, resulting in a cooler cutter, less burning and a long cutting life.

    Starting at: From $17.99

  3. Freud 5-Piece Up Cut Spiral Router Bit Set
    Freud 5-Piece Up Cut Spiral Router Bit Set
    This incredible value packs five solid carbide up-cut spiral router bits into one neat wooden case: 3/16", 1/4", 5/16", 3/8" and 1/2".
  4. Rockler Straight Router Bits, 2-Flute, 1/2" Shank
    Rockler Straight Router Bits, 2-Flute, 1/2" Shank
    14 Review(s)
    Rout clean, precise dados and mortises with these precision ground carbide straight bits.

    Starting at: From $9.99

  5. Includes one arbor, two 22mm bearings, and two cutters. Make a Groove bit (shown) or a Tongue bit by attaching the second cutter.
    Rockler Tongue and Groove Router Bit, 3/8" Cutter Width X 1/4" Cutter Height, 1/2" Shank
    10 Review(s)
    Convertible arbor can be configured to cut both the tongue and groove for 3/4" stock.
  6. Rockler Keyhole Slot Router Bits
    Rockler Keyhole Slot Router Bits
    7 Review(s)
    This twin-flute cutter captures a screw head for fastening wall hung items. Also used for knock-down furniture.

    Starting at: From $14.99

  7. Rockler 3-Pc. Signmaking Router Bit Set
    Rockler 3-Pc. Signmaking Router Bit Set
    2 Review(s)
    Three of our most popular signmaking bits in one convenient set!
  8. Rockler Straight Router Bits, 2-Flute, 1/4" Shank
    Rockler Straight Router Bits, 2-Flute, 1/4" Shank
    11 Review(s)
    Cut grooves, dados and rabbets with these precision ground carbide straight bits.

    Starting at: From $13.99

  9. Rockler 4-Pc. Straight Bit Set
    Rockler 4-Pc. Straight Bit Set
    5 Review(s)
    Includes four of the most popular straight bit sizes for dados, grooves and rabbets.
  10. 2 Flute Trim Router Bit
    Piloted Flush Trim Bits 1/4" Shank
    Use these bits to trim veneers and solid stock flush with the underlying substrate.

    Starting at: From $15.99

  11. Rockler Bullnose Radius Bits
    Rockler Bullnose Radius Bits
    Cut perfectly rounded edges in a snap!

    Starting at: From $29.99

  12. Includes one arbor, two 22mm bearings, and two cutters. Make a Groove bit (shown) or a Tongue bit by attaching the second cutter.
    Rockler Tongue and Groove Router Bit, 3/8" Cutter Width X 1/4" Cutter Height, 1/4" Shank
    10 Review(s)
    Convertible arbor can be configured to cut both the tongue and groove for 3/4" stock.
  13. Freud Carbide Up-Spiral Router Bits
    Freud Carbide Up-Spiral Router Bits
    1 Review(s)
    Upward spiral ejects chips with incredible efficiency—perfect for routing mortises and other deep grooves.

    Starting at: From $51.47

  14. Core Box Router Bits-1/4"  Shank
    Core Box Router Bits-1/4" Shank
    5 Review(s)
    This classic fluting cutter cuts a round-bottom groove—ideal for decorative columns, finger pulls, sill drip rails and more.

    Starting at: From $17.99

  15. Rockler 3-Pc. Roundover/Beading Bit Set
    Rockler 3-Pc. Roundover/Beading Bit Set
    4 Review(s)
    Three of our most popular round over bits—all convertible to beading bits with the included 3/8" bearings.
  16. Dovetail Router Bits-1/2" Shank
    Dovetail Router Bits-1/2" Shank
    2 Review(s)
    The dovetail joint remains a distinctive mark of quality in fine cabinetry and furniture, and these router bits more than live up to that reputation.

    Starting at: From $14.99

  17. 4-Piece Straight Bit Set - 1/4" Shank
    4-Piece Straight Bit Set - 1/4" Shank
    A perfect beginner set for cutting grooves, dados and rabbets—includes four of the most common sizes.
  18. Onsrud Down-Cut Spiral Bits
    Onsrud Down-Cut Spiral Bits
    Down-shear spiral action prevents chip-out and fuzzing at the edge of the cut—ideal for cutting clean dados, grooves and rabbets.

    Starting at: From $19.39

  19. Freud Double Flute Straight Bits-Optional Sizes

    Starting at: From $17.97

  20. Dovetail Router Bits-1/4" Shank
    Dovetail Router Bits-1/4" Shank
    2 Review(s)
    The dovetail joint remains a distinctive mark of quality in fine cabinetry and furniture, and these router bits more than live up to that reputation.

    Starting at: From $13.99

  21. Freud Down-Spiral Router Bits
    Freud Down-Spiral Router Bits
    3 Review(s)
    Downward spiral leaves clean, splinter-free edges for dados, grooves and rabbets.

    Starting at: From $50.97

Here are some key terms you'll want to know in selecting the right router bit for your project.

Profile: The shape of the bit's edge and the contour of the resulting cut. Common profiles include:

Straight bits make straight cuts such as dadoes and grooves.
Rabbeting bits cut a notch along the edge of a workpiece.
Flush-trim bits trim the edge of one workpiece to match the edge of another.
Chamfer bits cut a bevel on the edge of a workpiece. Round-over bits soften the edge of a workpiece. They come in different radiuses.
Beading bits cut a rounded decorative edge.
Molding bits combine edge-forming profiles into one bit.
Specialty bits – such as dovetail, stile-and-rail, and panel-raising bits – are used to do specific tasks.

Shank: The part of the bit that is secured in the router. The two most common shank sizes are 1/4" and 1/2".

Pilot bearing: On some router bits, the free-rotating metal wheel above or below the cutter that runs along the workpiece edge, acting as a guide.

HSS: High-speed steel.

Carbide: Material often used to make cutting tips on router bits. It's harder than steel and holds an edge longer.

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X