Router Bits

  1. Rockler Classical Roman Ogee Plunge Bits
    Rockler Classical Roman Ogee Plunge Bits
    1 Review(s)
    This decorative plunge bit is often used to create a faux panel door effect in slab door and drawer fronts.

    Starting at: From $23.99

  2. Rockler Straight Router Bits, 2-Flute, 1/2" Shank
    Rockler Straight Router Bits, 2-Flute, 1/2" Shank
    14 Review(s)
    Rout clean, precise dados and mortises with these precision ground carbide straight bits.

    Starting at: From $9.99

  3. Roundover/ Beading Router Bits-1/2 Inch  Shank
    Roundover/ Beading Router Bits-1/2 Inch Shank
    13 Review(s)
    These dual-purpose bits include an additional smaller bearing that can be installed when a beaded edge is desired.

    Starting at: From $22.99

  4. Rockler Straight Router Bits, 2-Flute, 1/4" Shank
    Rockler Straight Router Bits, 2-Flute, 1/4" Shank
    11 Review(s)
    Cut grooves, dados and rabbets with these precision ground carbide straight bits.

    Starting at: From $13.99

  5. Core Box Router Bits-1/2"  Shank
    Core Box Router Bits-1/2" Shank
    5 Review(s)
    This classic fluting cutter cuts a round-bottom groove—ideal for decorative columns, finger pulls, sill drip rails and more.

    Starting at: From $23.99

  6. Pattern Flush Trim Router Bit- 1/2 Inch Shank
    Pattern Flush Trim Router Bit- 1/2 Inch Shank
    21 Review(s)
    Fast, smooth flush-cutting capabilities.

    Starting at: From $26.99

  7. Roundover/ Beading Router Bits-1/4 Inch Shank
    Roundover/ Beading Router Bits-1/4 Inch Shank
    13 Review(s)
    These dual-purpose bits include an additional smaller bearing that can be installed when a beaded edge is desired.

    Starting at: From $22.99

  8. Rockler 4-Pc. Straight Bit Set
    Rockler 4-Pc. Straight Bit Set
    5 Review(s)
    Includes four of the most popular straight bit sizes for dados, grooves and rabbets.
  9. Pattern Flush Trim Router Bit 3/4'' Diameter x 1-1/4'' Height
    Pattern Flush Trim Router Bit 3/4'' Diameter x 1-1/4'' Height
    21 Review(s)
    With the quide bearing mounted at the top, this bit provides excellent visibility of the cut line when using templates.
  10. Rockler Bullnose Radius Bits
    Rockler Bullnose Radius Bits
    Cut perfectly rounded edges in a snap!

    Starting at: From $29.99

  11. Rockler 5-Pc. Starter Bit Set
    Rockler 5-Pc. Starter Bit Set
    Get five of the most commonly used router bits in woodworking for one low price!
  12. Rockler Flush Door Trimming Bit
    Rockler Flush Door Trimming Bit
    6 Review(s)
    Top-mounted guide bearing lets you hand rout with templates in full view.
  13. Cove Router Bits-1/2 Inch Shank
    Cove Router Bits-1/2 Inch Shank
    2 Review(s)
    Simple cove provides an elegant edge for drawer fronts, cabinet doors, furniture pieces and molding trim.

    Starting at: From $25.99

  14. #24740 Single Top-Mounted Bearing
    2 Flute Double Bearing Shear Flush Trim Bit 3/4" Dia x 1-1/2" Cutter x 1/2" Shank
    13 Review(s)
    Shearing action of skewed cutters produces a smoother finish, and helps eliminate tear-out.
  15. Dovetail Router Bits-1/2" Shank
    Dovetail Router Bits-1/2" Shank
    2 Review(s)
    The dovetail joint remains a distinctive mark of quality in fine cabinetry and furniture, and these router bits more than live up to that reputation.

    Starting at: From $14.99

  16. Rockler Pattern Flush Trim Bits for Plunge Routers
    Rockler Pattern Flush Trim Bits for Plunge Routers
    1 Review(s)
    Top-mounted guide bearings make it easy to use these bits with top-mounted templates.

    Starting at: From $27.59

  17. Freud 13 Piece Super Bit Set
    Freud 13 Piece Super Bit Set
    2 Review(s)
    Offers a wide variety of router bits, including "V" groove, flush trim, chamfer and dovetail bits.
  18. 4-Piece Straight Bit Set - 1/4" Shank
    4-Piece Straight Bit Set - 1/4" Shank
    A perfect beginner set for cutting grooves, dados and rabbets—includes four of the most common sizes.
  19. V-Groove Router Bit
    V-Groove Router Bit
    2 Review(s)
    This ninety degree V-Groove Bit is ideal for making signs and adding decorative accents to furniture and plaques.
  20. Hinge Mortising Router Bit 3/4" Diameter x 3/4" Height (1/2" Shank)
    Hinge Mortising Router Bit 3/4" Diameter x 3/4" Height (1/2" Shank)
    1 Review(s)
    The shorter length of this mortising bit allows you to pull it way back into the baseplate for routing shallow recesses.
  21. #24740 Single Top-Mounted Bearing
    2 Flute Shear Flush Trim Bit, 3/4" Dia. x 1-1/2" Cutter x 1/2" Shank
    13 Review(s)
    A full 1-1/2" of carbide makes this bit ideal for trimming thick stock as well as laminates and veneers.
  22. 3/4" Diameter X 1" High Molding Bit
    3/4" Diameter X 1" High Molding Bit
    1 Review(s)
    Recommended for crown molding, window casing/sills, baseboards, picture frames, and chair rails.
  23. Small Trim Router Bit Kit, 3/4" Dia. x 1" L, for 1" Thick Doors
    Small Trim Router Bit Kit, 3/4" Dia. x 1" L, for 1" Thick Doors
    5 Review(s)
    Joint 1/16", 1/8", or 3/16" of material off of stock up to 2" thick—all with just two router passes!
  24. Cove Router Bits-1/4 Inch Shank
    Cove Router Bits-1/4 Inch Shank
    2 Review(s)
    Simple cove provides an elegant edge for drawer fronts, cabinet doors, furniture pieces and molding trim.

    Starting at: From $24.99

Here are some key terms you'll want to know in selecting the right router bit for your project.

Profile: The shape of the bit's edge and the contour of the resulting cut. Common profiles include:

Straight bits make straight cuts such as dadoes and grooves.
Rabbeting bits cut a notch along the edge of a workpiece.
Flush-trim bits trim the edge of one workpiece to match the edge of another.
Chamfer bits cut a bevel on the edge of a workpiece. Round-over bits soften the edge of a workpiece. They come in different radiuses.
Beading bits cut a rounded decorative edge.
Molding bits combine edge-forming profiles into one bit.
Specialty bits – such as dovetail, stile-and-rail, and panel-raising bits – are used to do specific tasks.

Shank: The part of the bit that is secured in the router. The two most common shank sizes are 1/4" and 1/2".

Pilot bearing: On some router bits, the free-rotating metal wheel above or below the cutter that runs along the workpiece edge, acting as a guide.

HSS: High-speed steel.

Carbide: Material often used to make cutting tips on router bits. It's harder than steel and holds an edge longer.

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X