Router Bits

  1. Rockler Drawer Lock Router Bit
    Sale
    Rockler Drawer Lock Router Bit
    18 Review(s)
    Rout strong, precise corner joints for drawer boxes with just one bit!

    Regular Price: $37.99

    Special Price $26.59

  2. Rockler Straight Router Bits, 2-Flute, 1/2" Shank
    Rockler Straight Router Bits, 2-Flute, 1/2" Shank
    14 Review(s)
    Rout clean, precise dados and mortises with these precision ground carbide straight bits.

    Starting at: From $9.99

  3. Roundover/ Beading Router Bits-1/2 Inch  Shank
    Roundover/ Beading Router Bits-1/2 Inch Shank
    13 Review(s)
    These dual-purpose bits include an additional smaller bearing that can be installed when a beaded edge is desired.

    Starting at: From $22.99

  4. Core Box Router Bits-1/2"  Shank
    Core Box Router Bits-1/2" Shank
    5 Review(s)
    This classic fluting cutter cuts a round-bottom groove—ideal for decorative columns, finger pulls, sill drip rails and more.

    Starting at: From $23.99

  5. Roundover/ Beading Router Bits-1/4 Inch Shank
    Roundover/ Beading Router Bits-1/4 Inch Shank
    13 Review(s)
    These dual-purpose bits include an additional smaller bearing that can be installed when a beaded edge is desired.

    Starting at: From $22.99

  6. Rockler 45 Degree Chamfer Router Bits-1/2 Inch Shank
    Rockler 45 Degree Chamfer Router Bits-1/2 Inch Shank
    5 Review(s)
    Among the most classic edge treatments available—a simple 45 degree angle to add both softness and definition.

    Starting at: From $25.99

  7. Rockler Bead & Cove Bits for Canoe Building
    Rockler Bead & Cove Bits for Canoe Building
    4 Review(s)
    A dual-purpose router bit that cuts both beads and coves, which then fit together to create curving forms!

    Starting at: From $49.99

  8. Dovetail Router Bits-1/2" Shank
    Dovetail Router Bits-1/2" Shank
    2 Review(s)
    The dovetail joint remains a distinctive mark of quality in fine cabinetry and furniture, and these router bits more than live up to that reputation.

    Starting at: From $14.99

  9. Rockler Pattern Flush Trim Bits for Plunge Routers
    Rockler Pattern Flush Trim Bits for Plunge Routers
    1 Review(s)
    Top-mounted guide bearings make it easy to use these bits with top-mounted templates.

    Starting at: From $27.59

  10. Edge Beading Router Bits-1/2" Shank
    Edge Beading Router Bits-1/2" Shank
    4 Review(s)
    With its integral guide bearing, this beading bit is easy to use either freehand or in a router table.

    Starting at: From $23.99

  11. Large Trim Router Bit Kit, 1" Dia. x 2" L, for 2" Thick Doors
    Large Trim Router Bit Kit, 1" Dia. x 2" L, for 2" Thick Doors
    5 Review(s)
    Joint 1/16", 1/8", or 3/16" of material off of stock up to 2" thick—all with just two router passes!
  12. Freud #30-110 Cove Bit, 1/4'' Rad. x 1'' Dia. x 1/2'' H x 1/2'' Sh.
    Freud #30-110 Cove Bit, 1/4'' Rad. x 1'' Dia. x 1/2'' H x 1/2'' Sh.
    Create smooth, classic cove profiles with Freud cove bits, featuring a shear angle that slices wood like a finely tuned hand plane.
  13. 1'' Dish Carving Router Bit, 1/4" Shank
    1'' Dish Carving Router Bit, 1/4" Shank
    3 Review(s)
    Rout wide flat-bottomed recesses with a practical and attractive radius at the bottom corner.
  14. Rockler 45 Degree Chamfer Router Bits-1/4 Inch Shank
    Rockler 45 Degree Chamfer Router Bits-1/4 Inch Shank
    5 Review(s)
    Among the most classic edge treatments available—a simple 45 degree angle to add both softness and definition.

    Starting at: From $24.99

  15. Classic Roman Ogee Router Bits-1/2" Shank
    Classic Roman Ogee Router Bits-1/2" Shank
    2 Review(s)
    Corresponding bead and cove provides a pleasing balance that's suitable for a wide variety of edge treatments.

    Starting at: From $39.99

  16. Freud Quadra-Cut™ Rounding Over Bits
    Freud Quadra-Cut™ Rounding Over Bits
    1 Review(s)
    Two primary cutters shear upward for a smooth finish, while two smaller cutters shear downward to eliminate splintering on the face.

    Starting at: From $35.97

  17. Classic Cove Router Bits-1/2" Shank
    Classic Cove Router Bits-1/2" Shank
    This simple cove is flanked by a subtle step on either side—a classic design that fits a variety of styles.

    Starting at: From $39.99

  18. Edge Beading Router Bit-1/4" Shank
    Edge Beading Router Bit-1/4" Shank
    4 Review(s)
    With its integral guide bearing, this beading bit is easy to use either freehand or in a router table.

    Starting at: From $34.99

  19. Freud Traditional Beading Bits
    Freud Traditional Beading Bits
    3 Review(s)
    A classic beading bit commonly used to match the profiles in historic homes.

    Starting at: From $35.97

  20. Classic Roman Ogee Router Bits-1/4" Shank
    Classic Roman Ogee Router Bits-1/4" Shank
    2 Review(s)
    With its corresponding bead and cove, this profile embodies the meaning of classical design.

    Starting at: From $39.99

  21. No Drip Edge Router Bit
    No Drip Edge Router Bit
    Keep drips and spills off the floor the easy way with our No-Drip Router Bit!
  22. Specialty Molding Router Bit 1" Diameter x 1-3/8" High x 1/2" Shank
    Specialty Molding Router Bit 1" Diameter x 1-3/8" High x 1/2" Shank
    1 Review(s)
    Recommended for window casing/sills, baseboards, picture frames, and chair rails.
  23. Classic Ogee Router Bits-1/2 Inch Shank
    Classic Ogee Router Bits-1/2 Inch Shank
    A lower round over paired with an upper cove to form a classic ogee edge profile.

    Starting at: From $32.99

Here are some key terms you'll want to know in selecting the right router bit for your project.

Profile: The shape of the bit's edge and the contour of the resulting cut. Common profiles include:

Straight bits make straight cuts such as dadoes and grooves.
Rabbeting bits cut a notch along the edge of a workpiece.
Flush-trim bits trim the edge of one workpiece to match the edge of another.
Chamfer bits cut a bevel on the edge of a workpiece. Round-over bits soften the edge of a workpiece. They come in different radiuses.
Beading bits cut a rounded decorative edge.
Molding bits combine edge-forming profiles into one bit.
Specialty bits – such as dovetail, stile-and-rail, and panel-raising bits – are used to do specific tasks.

Shank: The part of the bit that is secured in the router. The two most common shank sizes are 1/4" and 1/2".

Pilot bearing: On some router bits, the free-rotating metal wheel above or below the cutter that runs along the workpiece edge, acting as a guide.

HSS: High-speed steel.

Carbide: Material often used to make cutting tips on router bits. It's harder than steel and holds an edge longer.

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X