Router Bits

  1. Freud Quadra-Cut™ Rounding Over Bits
    Freud Quadra-Cut™ Rounding Over Bits
    11 Review(s)
    Two large wings shear upward for a smooth, easy cut, while the two small wings shear downward to eliminate splintering and fuzzing on the face.

    Starting at: From $38.97

  2. Roundover/ Beading Router Bits-1/2 Inch  Shank
    Roundover/ Beading Router Bits-1/2 Inch Shank
    13 Review(s)
    These dual-purpose bits include an additional smaller bearing that can be installed when a beaded edge is desired.

    Starting at: From $22.99

  3. Rockler Straight Router Bits, 2-Flute, 1/2" Shank
    Rockler Straight Router Bits, 2-Flute, 1/2" Shank
    14 Review(s)
    Rout clean, precise dados and mortises with these precision ground carbide straight bits.

    Starting at: From $9.99

  4. Roundover/ Beading Router Bits-1/4 Inch Shank
    Roundover/ Beading Router Bits-1/4 Inch Shank
    13 Review(s)
    These dual-purpose bits include an additional smaller bearing that can be installed when a beaded edge is desired.

    Starting at: From $22.99

  5. Freud 13 Piece Super Bit Set
    Freud 13 Piece Super Bit Set
    2 Review(s)
    Offers a wide variety of router bits, including "V" groove, flush trim, chamfer and dovetail bits.
  6. Vertical Panel Router Bit Set With Wooden Case
    Vertical Panel Router Bit Set With Wooden Case
    1 Review(s)
    Build beautiful, long-lasting raised panel doors of all sizes with this three piece boxed set.
  7. Rockler Restoration Beading Router Bits, 1/2" Shank
    Rockler Restoration Beading Router Bits, 1/2" Shank
    2 Review(s)
    These beading bits feature a smooth half-round profile—perfect for beaded moldings and for bull-nosed edges.

    Starting at: From $26.99

  8. 1-1/4'' Dish Carving Router Bit
    Exclusive
    1-1/4'' Dish Carving Router Bit
    Make custom bowls and trays of all shapes and sizes with this bearing-guided Dish Carving Router Bit!
  9. CMT Bowl & Tray System Kit
    CMT Bowl & Tray System Kit
    3 Review(s)
    Make a huge variety of unique wooden bowls and platters with this all-in-one template and router bit kit!
  10. Rockler 2-Pc. Drop Leaf Table Rule Joint Router Bit Set
    Rockler 2-Pc. Drop Leaf Table Rule Joint Router Bit Set
    1 Review(s)
    Mill precise rule joints for your drop-leaf table!
  11. 2-1/4' Cove Crown Molding Bit, 1/2' Shank
    2-1/4' Cove Crown Molding Bit, 1/2' Shank
    Mill your own custom cove crown moldings in the material of your choice!
  12. 1'' Dish Carving Router Bit 1/2" Shank
    1'' Dish Carving Router Bit 1/2" Shank
    3 Review(s)
    Rout wide flat-bottomed recesses with a practical and attractive radius at the bottom corner.
  13. 30 Degree Chamfer Bead Profile Bit
    30 Degree Chamfer Bead Profile Bit
    2 Review(s)
    Routs a simple, flat field that looks great with Shaker style furniture.
  14. Classic Multi-Form Router Bit
    Classic Multi-Form Router Bit
    2 Review(s)
    Create a huge variety of profiles simply by adjusting the height of this bit in your router table.
  15. 21151 - Vertical Raised Panel Router Bit - Cove Vertical
    Rockler Cove Vertical Raised Panel Router Bit, 1-1/4" Diameter x 1-5/8"H
    Vertical orientation lets you raise panels without needing an expensive 3 HP router.
  16. Crown Moulding Bit 1-1/4" Dia. x 2-1/4" Cutter x 1/2" Shank
    Crown Moulding Bit 1-1/4" Dia. x 2-1/4" Cutter x 1/2" Shank
    1 Review(s)
    Cuts a traditional crown molding profile for a stately accent in any room.
  17. 21137 - 1-1/4' Diameter x 1-5/8' Height Raised Panel Router Bit - Straight Vertical
    Raised Panel Router Bit - Straight
    4 Review(s)
    Vertical orientation lets you machine beautiful raised panels with an ordinary 2 HP router!
  18. Freud Traditional Beading Bits
    Freud Traditional Beading Bits
    3 Review(s)
    A classic beading bit commonly used to match the profiles in historic homes.

    Starting at: From $35.97

  19. Freud Quadra-Cut™ Rounding Over Bits
    Freud Quadra-Cut™ Rounding Over Bits
    1 Review(s)
    Two primary cutters shear upward for a smooth finish, while two smaller cutters shear downward to eliminate splintering on the face.

    Starting at: From $35.97

  20. Raised Panel Router Bit - Ogee
    Raised Panel Router Bit - Ogee
    2 Review(s)
    Lets you raise panels without the added expense of a high-powered 3 HP router.
  21. Crown Moulding Bit 1-1/4" Dia. x 2-1/4" Cutter x 1/2" Shank
  22. Make a subtle decorative edge, perfect for enhancing doors and drawer fronts
    Twin Step Ogee Bit OE833
    Stepped ogee edge profiling bit creates a distinct geometric effect for your cabinetry projects.
  23. Classic Cove Router Bits-1/2" Shank
    Classic Cove Router Bits-1/2" Shank
    This simple cove is flanked by a subtle step on either side—a classic design that fits a variety of styles.

    Starting at: From $39.99

  24. Handrail Router Bit
    Handrail Router Bit
    Use our Handrail Router Bit to rout comfortable finger recesses in the cheeks of your handrail.

Here are some key terms you'll want to know in selecting the right router bit for your project.

Profile: The shape of the bit's edge and the contour of the resulting cut. Common profiles include:

Straight bits make straight cuts such as dadoes and grooves.
Rabbeting bits cut a notch along the edge of a workpiece.
Flush-trim bits trim the edge of one workpiece to match the edge of another.
Chamfer bits cut a bevel on the edge of a workpiece. Round-over bits soften the edge of a workpiece. They come in different radiuses.
Beading bits cut a rounded decorative edge.
Molding bits combine edge-forming profiles into one bit.
Specialty bits – such as dovetail, stile-and-rail, and panel-raising bits – are used to do specific tasks.

Shank: The part of the bit that is secured in the router. The two most common shank sizes are 1/4" and 1/2".

Pilot bearing: On some router bits, the free-rotating metal wheel above or below the cutter that runs along the workpiece edge, acting as a guide.

HSS: High-speed steel.

Carbide: Material often used to make cutting tips on router bits. It's harder than steel and holds an edge longer.

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X