Router Bits

  1. Rockler Straight Router Bits, 2-Flute, 1/2" Shank
    Rockler Straight Router Bits, 2-Flute, 1/2" Shank
    14 Review(s)
    Rout clean, precise dados and mortises with these precision ground carbide straight bits.

    Starting at: From $9.99

  2. Roundover/ Beading Router Bits-1/2 Inch  Shank
    Roundover/ Beading Router Bits-1/2 Inch Shank
    13 Review(s)
    These dual-purpose bits include an additional smaller bearing that can be installed when a beaded edge is desired.

    Starting at: From $22.99

  3. Core Box Router Bits-1/2"  Shank
    Core Box Router Bits-1/2" Shank
    5 Review(s)
    This classic fluting cutter cuts a round-bottom groove—ideal for decorative columns, finger pulls, sill drip rails and more.

    Starting at: From $23.99

  4. Rockler Bead & Cove Bits for Canoe Building
    Rockler Bead & Cove Bits for Canoe Building
    4 Review(s)
    A dual-purpose router bit that cuts both beads and coves, which then fit together to create curving forms!

    Starting at: From $49.99

  5. Rockler Wedge Tongue and Groove Bit
    Rockler Wedge Tongue and Groove Bit
    8 Review(s)
    Get stronger edge joints and easy mechanical alignment with the Wedge Tongue and Groove Bit.
  6. Rockler 2-Pc. Drop Leaf Table Rule Joint Router Bit Set
    Rockler 2-Pc. Drop Leaf Table Rule Joint Router Bit Set
    1 Review(s)
    Mill precise rule joints for your drop-leaf table!
  7. Freud 13 Piece Super Bit Set
    Freud 13 Piece Super Bit Set
    2 Review(s)
    Offers a wide variety of router bits, including "V" groove, flush trim, chamfer and dovetail bits.
  8. Matching Flute and Bead Router Bits
    Matching Flute and Bead Router Bits
    The profiles of these bits fit neatly into one another—ideal for canoes, coopered projects and roll-top desks.

    Starting at: From $29.99

  9. Classic Roman Ogee Router Bits-1/2" Shank
    Classic Roman Ogee Router Bits-1/2" Shank
    2 Review(s)
    Corresponding bead and cove provides a pleasing balance that's suitable for a wide variety of edge treatments.

    Starting at: From $39.99

  10. Rockler French Traditional Router Bit
    Rockler French Traditional Router Bit
    An excellent bit for chair rails, case moldings, picture frames and crown moldings.
  11. Classic Roman Ogee Router Bits-1/4" Shank
    Classic Roman Ogee Router Bits-1/4" Shank
    2 Review(s)
    With its corresponding bead and cove, this profile embodies the meaning of classical design.

    Starting at: From $39.99

  12. Freud Canoe Joint Bits
    Freud Canoe Joint Bits
    These two bits cut corresponding beads and coves to create a hinging joint that's perfect for curved items, especially canoes.

    Starting at: From $49.97

  13. Freud Reversible Glue Joint Bit
    Freud Reversible Glue Joint Bit
    1 Review(s)
    Provides a stronger joint by increasing the available surface area for glue.
  14. Freud  Cove Router Bit 30-114
    Freud Cove Router Bit 30-114
    Routs a simple, classic cove profile to embellish table edges, door and drawer fronts and more.
  15. Freud Classical Roman Ogee Bit, 1/2" Shank
    Freud Classical Roman Ogee Bit, 1/2" Shank
    Features a small step at the top, which adds a bit of definition to the graceful ogee curve.
  16. Classic Ogee Router Bits-1/2 Inch Shank
    Classic Ogee Router Bits-1/2 Inch Shank
    A lower round over paired with an upper cove to form a classic ogee edge profile.

    Starting at: From $32.99

  17. Freud Rail & Stile Profile Bit
    Freud Rail & Stile Profile Bit
    A simple, affordable router bit for creating frame and panel doors.
  18. Classic Ogee Router Bit, 1/4" Shank
    Classic Ogee Router Bit, 1/4" Shank
    A lower round over paired with an upper cove to form a classic ogee edge profile.

Here are some key terms you'll want to know in selecting the right router bit for your project.

Profile: The shape of the bit's edge and the contour of the resulting cut. Common profiles include:

Straight bits make straight cuts such as dadoes and grooves.
Rabbeting bits cut a notch along the edge of a workpiece.
Flush-trim bits trim the edge of one workpiece to match the edge of another.
Chamfer bits cut a bevel on the edge of a workpiece. Round-over bits soften the edge of a workpiece. They come in different radiuses.
Beading bits cut a rounded decorative edge.
Molding bits combine edge-forming profiles into one bit.
Specialty bits – such as dovetail, stile-and-rail, and panel-raising bits – are used to do specific tasks.

Shank: The part of the bit that is secured in the router. The two most common shank sizes are 1/4" and 1/2".

Pilot bearing: On some router bits, the free-rotating metal wheel above or below the cutter that runs along the workpiece edge, acting as a guide.

HSS: High-speed steel.

Carbide: Material often used to make cutting tips on router bits. It's harder than steel and holds an edge longer.

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X