Router Bits

  1. Rockler 45 Degree Chamfer Router Bits-1/2 Inch Shank
    Rockler 45 Degree Chamfer Router Bits-1/2 Inch Shank
    5 Review(s)
    Among the most classic edge treatments available—a simple 45 degree angle to add both softness and definition.

    Starting at: From $25.99

  2. 40431 - 2-Piece Rail/Stile Shaker Cutter Bit Set
    New
    2-Piece Rail/Stile Shaker Cutter Bit Set
    A distinctive chamfered edge makes this rail and stile set an excellent candidate for Shaker-style doors and drawers.
  3. 40432 - Complete 3-Piece Shaker Raised Panel Bit Set
    Shaker Raised Panel 3-Piece Bit Set
    Combines a rail and stile set with a panel raiser for building beautiful Shaker raised panel doors!
  4. Round Rail and Stile Router Bit Set
    Round Rail and Stile Router Bit Set
    5 Review(s)
    Build beautiful frame and panel doors with minimal setup and absolute precision!
  5. Custom Door Edge Router Bit
    Custom Door Edge Router Bit
    Provides an attractive cove on the face of your door, plus a beveled finger recess for easy opening.
  6. Cove Router Bits-1/2 Inch Shank
    Cove Router Bits-1/2 Inch Shank
    2 Review(s)
    Simple cove provides an elegant edge for drawer fronts, cabinet doors, furniture pieces and molding trim.

    Starting at: From $25.99

  7. Rockler Round-Edge Matched Stile and Rail Bit Set
    Rockler Round-Edge Matched Stile and Rail Bit Set
    1 Review(s)
    Precision-machined to guarantee a perfect fitting cope and stick joint—every time!
  8. Make a subtle decorative edge, perfect for enhancing doors and drawer fronts
    Decorative Ogee Bit OE869
    1 Review(s)
    Cuts a decorative edge that is perfect for enhancing doors and drawer fronts!
  9. Rockler Classical Reversible Rail & Stile Bit
    Rockler Classical Reversible Rail & Stile Bit
    1 Review(s)
    Mill cope and stick doors with a single cutter—just shift the profile cutter between the top and bottom of the stack.
  10. 2-Piece Ogee Stile and Rail Router Bit Set
    2-Piece Ogee Stile and Rail Router Bit Set
    Bearing-guided cope and stick set helps you machine perfect frame and panel doors without dips and snipe.
  11. Make a subtle decorative edge, perfect for enhancing doors and drawer fronts
    Ogee Door Bit OE804
    Cuts a decorative coved edge, perfect for enhancing doors and drawer fronts!
  12. Beaded Base Molding Bit
    Beaded Base Molding Bit
    Create your own door casings, trim and baseboards with an attractive architectural appearance.
  13. Rockler Ogee Reversible Rail & Stile Bit
    Rockler Ogee Reversible Rail & Stile Bit
    2 Review(s)
    Mill cope and stick doors with a single cutter—just shift the profile cutter between the top and bottom of the stack.
  14. Rockler Chamfer Reversible Rail & Stile Bit
    Rockler Chamfer Reversible Rail & Stile Bit
    1 Review(s)
    Mill cope and stick doors with a single cutter—just shift the profile cutter between the top and bottom of the stack.
  15. Ogee Fillet Router Bit
    Ogee Fillet Router Bit
    1 Review(s)
    Routs a smooth ogee profile with a "fillet," or step, along the top edge for added definition.

Here are some key terms you'll want to know in selecting the right router bit for your project.

Profile: The shape of the bit's edge and the contour of the resulting cut. Common profiles include:

Straight bits make straight cuts such as dadoes and grooves.
Rabbeting bits cut a notch along the edge of a workpiece.
Flush-trim bits trim the edge of one workpiece to match the edge of another.
Chamfer bits cut a bevel on the edge of a workpiece. Round-over bits soften the edge of a workpiece. They come in different radiuses.
Beading bits cut a rounded decorative edge.
Molding bits combine edge-forming profiles into one bit.
Specialty bits – such as dovetail, stile-and-rail, and panel-raising bits – are used to do specific tasks.

Shank: The part of the bit that is secured in the router. The two most common shank sizes are 1/4" and 1/2".

Pilot bearing: On some router bits, the free-rotating metal wheel above or below the cutter that runs along the workpiece edge, acting as a guide.

HSS: High-speed steel.

Carbide: Material often used to make cutting tips on router bits. It's harder than steel and holds an edge longer.

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X