Router Bits

  1. Freud Quadra-Cut™ Rounding Over Bits
    Freud Quadra-Cut™ Rounding Over Bits
    11 Review(s)
    Two large wings shear upward for a smooth, easy cut, while the two small wings shear downward to eliminate splintering and fuzzing on the face.

    Starting at: From $38.97

  2. 40432 - Complete 3-Piece Shaker Raised Panel Bit Set
    Shaker Raised Panel 3-Piece Bit Set
    Combines a rail and stile set with a panel raiser for building beautiful Shaker raised panel doors!
  3. 21522  - Horizontal Raised Panel Router Bit - Cove
    Raised Panel Router Bit - Cove - Horizontal
    3 Review(s)
    Horizontal panel raising bits cut more smoothly than vertical bits, and allow you to raise curved panels.

    Starting at: From $64.99

  4. Horizontal Raised Panel Router Bits
    Raised Panel Router Bit - Ogee - Horizontal
    2 Review(s)
    Horizontal panel raising bits cut more smoothly than vertical bits, and they also allow you to raise curved panels.

    Starting at: From $64.99

  5. Freud Quadra-Cut™ Ogee Table Edge & Handrail Bits
    Sale
    Freud Quadra-Cut™ Ogee Table Edge & Handrail Bits
    1 Review(s)
    Freud's exclusive Quadra-Cut four-wing design virtually eliminates burning, fuzzing and chipping along the edges.

    Regular Price: $88.97

    Special Price $66.72

  6. 21515 and 38973 Raised Panel Router Bit - Straight  Horizontal Bit
    Raised Panel Router Bit - Straight - Horizontal
    4 Review(s)
    Horizontal panel-raising bits cut more smoothly than vertical bits, and they also allow you to raise curved panels.

    Starting at: From $64.99

  7. Horizontal Panel Router Bit Set With Wooden Case
    Horizontal Panel Router Bit Set With Wooden Case
    5 Review(s)
    Build beautiful, long-lasting raised panel doors of all sizes with this three piece boxed set.
  8. 2-1/2'' Table Top Edge Bit, 1/2'' Shank
    2-1/2'' Table Top Edge Bit, 1/2'' Shank
    1 Review(s)
    Offers a deep, handsome profile ideally sized for table and cabinet tops.
  9. Rockler Table Top Edge Bit
    Rockler Table Top Edge Bit
    Cuts in a full 1" from the edge, offering a generous profile for table edges and moldings.
  10. Table Edge Bit, 1/2'' Shank
    Table Edge Bit, 1/2'' Shank
    Offers a deep profile with a handsome ogee curve—ideally sized for table and cabinet tops.

Here are some key terms you'll want to know in selecting the right router bit for your project.

Profile: The shape of the bit's edge and the contour of the resulting cut. Common profiles include:

Straight bits make straight cuts such as dadoes and grooves.
Rabbeting bits cut a notch along the edge of a workpiece.
Flush-trim bits trim the edge of one workpiece to match the edge of another.
Chamfer bits cut a bevel on the edge of a workpiece. Round-over bits soften the edge of a workpiece. They come in different radiuses.
Beading bits cut a rounded decorative edge.
Molding bits combine edge-forming profiles into one bit.
Specialty bits – such as dovetail, stile-and-rail, and panel-raising bits – are used to do specific tasks.

Shank: The part of the bit that is secured in the router. The two most common shank sizes are 1/4" and 1/2".

Pilot bearing: On some router bits, the free-rotating metal wheel above or below the cutter that runs along the workpiece edge, acting as a guide.

HSS: High-speed steel.

Carbide: Material often used to make cutting tips on router bits. It's harder than steel and holds an edge longer.

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X