SaleMill precision parts for your own custom raised panel doors!
Regular Price: $183.47
Special Price $128.42
SaleCuts strong, fast miter joints for drawer boxes and cabinet cases.
Regular Price: $57.99
Special Price $39.99
This decorative plunge bit is often used to create a faux panel door effect in slab door and drawer fronts.
Starting at: From $23.99
Horizontal panel-raising bits cut more smoothly than vertical bits, and they also allow you to raise curved panels.
Starting at: From $64.99
Up-spiral design directs chips up and out of mortises and grooves, resulting in a cooler cutter, less burning and a long cutting life.
Starting at: From $17.99
This incredible value packs five solid carbide up-cut spiral router bits into one neat wooden case: 3/16", 1/4", 5/16", 3/8" and 1/2".$159.97
SaleRout strong, precise corner joints for drawer boxes with just one bit!
Regular Price: $37.99
Special Price $26.59
Rout clean, precise dados and mortises with these precision ground carbide straight bits.
Starting at: From $9.99
SaleCreate beautiful stile and rail doors with variable tenon lengths, and tight-fitting panel grooves.
Regular Price: $127.47
Special Price $89.22
Includes Quadra-Cut Panel Raiser and matching ogee cope and stick bits for the highest quality raised panel doors!$183.47
Includes ogee cope and stick set, plus a Quadra-Cut beveled panel raiser for top-quality raised panel doors.$183.47
Build sturdy, beautiful frame and panel doors with minimal setup and absolute precision!$99.99
This unique router bit is specifically designed to quickly machine the slats for louvered shutters.
Starting at: From $41.99
Convertible arbor can be configured to cut both the tongue and groove for 3/4" stock.$59.99
Adds a subtle decorative touch to the rails and stiles of your custom shutters.$29.99
These dual-purpose bits include an additional smaller bearing that can be installed when a beaded edge is desired.
Starting at: From $22.99
Produces perfectly fitted tongue and groove joints.$79.97
This classic fluting cutter cuts a round-bottom groove—ideal for decorative columns, finger pulls, sill drip rails and more.
Starting at: From $23.99
Slightly undersized to cut tight-fitting grooves and dadoes for plywood that measures less than its stated nominal thickness.
Starting at: From $13.99
Contains ogee cope and stick set and a coved raised panel cutter for creating beautiful custom raised panel doors!$183.47
Fast, smooth flush-cutting capabilities.
Starting at: From $26.99
SaleIncludes a set of four bearings to achieve the following cutting depths: 5/16", 3/8", 7/16" and 1/2".
Regular Price: $39.99
Special Price $27.99
Includes four of the most popular straight bit sizes for dados, grooves and rabbets.$59.99
Among the most classic edge treatments available—a simple 45 degree angle to add both softness and definition.
Starting at: From $25.99
Here are some key terms you'll want to know in selecting the right router bit for your project.
Profile: The shape of the bit's edge and the contour of the resulting cut. Common profiles include:
Straight bits make straight cuts such as dadoes and grooves.
Rabbeting bits cut a notch along the edge of a workpiece.
Flush-trim bits trim the edge of one workpiece to match the edge of another.
Chamfer bits cut a bevel on the edge of a workpiece. Round-over bits soften the edge of a workpiece. They come in different radiuses.
Beading bits cut a rounded decorative edge.
Molding bits combine edge-forming profiles into one bit.
Specialty bits – such as dovetail, stile-and-rail, and panel-raising bits – are used to do specific tasks.
Shank: The part of the bit that is secured in the router. The two most common shank sizes are 1/4" and 1/2".
Pilot bearing: On some router bits, the free-rotating metal wheel above or below the cutter that runs along the workpiece edge, acting as a guide.
HSS: High-speed steel.
Carbide: Material often used to make cutting tips on router bits. It's harder than steel and holds an edge longer.