Saw Accessories

  1. EZSmart Universal Saw Base Insert Pack
    EZSmart Universal Saw Base Insert Pack
    Includes zero-clearance inserts for chip-free cuts, plus a fin insert that acts as a riving knife to prevent kickback.
    $16.99
  2. EZSmart Guide Rail Extrusion, 54''
    EZSmart Guide Rail Extrusion, 54''
    Works with the EZSmart Universal Saw Base (55118) to provide laser-straight, chip-free cuts.
    $104.99
  3. EZSmart Guide Rail Connector, Center Channel
    EZSmart Guide Rail Connector, Center Channel
    Provides additional reinforcement needed when joining EZSmart Guide Rails with a total length of more than 110''.
    $14.99
  4. EZSmart Guide Rail Connectors, Outside Channel, 2-Pack
    EZSmart Guide Rail Connectors, Outside Channel, 2-Pack
    Use to join two EZSmart Guide Rails with a total length of up to 110''.
    $27.99
  5. EZSmart Track Saw System, 54''
    EZSmart Track Saw System, 54''
    2 Review(s)
    Turns your circular saw into a portable panel saw that churns out laser-straight, chip-free cuts.
    $169.99
  6. EZSmart 54'' Anti-Chip Edges, 3-Pack
    EZSmart 54'' Anti-Chip Edges, 3-Pack
    These replacement zero-clearance edges provide chip-free cuts when used with the EZSmart guide rail system (sold separately).
    $18.99
  7. Grr-Ripper Gravity Heel Kit
    New
    Grr-Ripper Gravity Heel Kit
    Plastic heels drop down and hook the end of your board—use with any Grr-Ripper Push Block System (e.g. 62689, sold separately).
    $15.95
  8. Incra Miter 1000HD Miter Gauge
    Incra Miter 1000HD Miter Gauge
    34 Review(s)
    Achieve absolute precision at any angle!
    $189.99
  9. Compact footprint makes it easy to store � simply hang it from a nail by your saw!
    $25.99
  10. 49047 - Urethane Bandsaw Tire, 12' x 3/4'
    Urethane Band Saw Tires - Fits 14'' Bandsaw
    35 Review(s)
    Stays flexible longer to increase the performance of your blade.
    $44.99
  11. E-Z jointer Clamp Kit
    E-Z jointer Clamp Kit
    8 Review(s)
    Straighten any length of lumber using your table saw.
    $24.19
  12. Rockler Tablesaw CrossCut Sled
    Exclusive
    Rockler Tablesaw CrossCut Sled
    96 Review(s)
    Cut precise miters and crosscuts while enjoying a spacious smooth-sliding table and large-easy-to-read scale.
    $139.99
  13. The Kreg Rip-Cut works great for crosscutting as well.
    Kreg® Rip-Cut Circular Saw Guide
    18 Review(s)
    If you like dimensioning large sheet goods with a handheld circular saw, you'll love the Kreg Rip-Cut Saw Guide!
    $34.99
  14. Zero Clearance Bandsaw Insert

    Starting at: From $10.99

  15. Ergonomic handle is easy on your hand and features a magnet.
    Exclusive
    Rockler Plastic Magnetic Push Stick
    23 Review(s)
    Magnet allows for convenient storage.
    $12.99
  16. Micro Jig GRR-Ripper® Advanced 3D Push Block System GR-200
    Micro Jig GRR-Ripper® Advanced 3D Push Block System GR-200
    12 Review(s)
    Advanced push block provides unrivaled safety and control over both the keeper and the waste piece—ideal for ripping thin strips.
    $79.99
  17. A push stick perfectly sized for your back pocket, apron pocket or tool pouch.
    Sale

    Regular Price: $5.99

    Special Price $3.99

  18. Easy to install! Simply replace the outer blade washer of your miter saw.
    $29.99
  19. Bench Dog Tools® TiterMiter™ Miter Slot and Accessory Track
    Sale
    Bench Dog Tools® TiterMiter™ Miter Slot and Accessory Track
    Adjustable set screws allow you to fine-tune the width of the miter track for smooth sliding and the most precise possible joints.

    Regular Price: $49.99

    Special Price $29.99

  20. SawStop Sliding Crosscut Table
    New
    SawStop Sliding Crosscut Table
    1 Review(s)
    Crosscut full 4' x 8' sheet stock with SawStop's first-ever precision slider attachment!
    $999.00
  21. EZSmart Universal Edge Guide With Universal Saw Base
    EZSmart Universal Edge Guide With Universal Saw Base
    Turns your circular saw into a handheld panel saw for precisely dimensioning sheet goods.
    $89.99
  22. EZSmart Universal Saw Base
    EZSmart Universal Saw Base
    Allows your circular saw to work with the EZSmart precision guide rails for laser-straight, chip-free cuts.
    $49.99
  23. Bosch TS1005 Zero-Clearance Insert for 4000 and 4100 Table Saws
    New
    Bosch TS1005 Zero-Clearance Insert for 4000 and 4100 Table Saws
    1 Review(s)
    Provides chip-free cuts when used with your Bosch 4000 or 4100 compact table saw.
    $7.99
  24. Bosch MS1233 Crown Stop Kit for Miter Saws
    New
    Bosch MS1233 Crown Stop Kit for Miter Saws
    Supports your crown molding in its natural angled position for the easiest possible miter cuts.
    $19.99

What People are Saying:

I have been using Rockler for years, your products are always the best that can be purchased and your prices are very reasonable. Ann you have always done your best to make me feel as though I was your very best customer. Thank you for great service."

- Daniel F.

What People are Saying:

I have been using Rockler for years, your products are always the best that can be purchased and your prices are very reasonable. Ann you have always done your best to make me feel as though I was your very best customer. Thank you for great service."

- Daniel F.
Feedback X