Accurately spaces rows 32mm apart and each hole 37mm from each edge  Zoom

Exclusive

Rockler Pro Shelf Drilling Jig

Item #: 31571
$84.99
Each In Stock
Eliminate the possibility of misaligned shelves and cut your setup time in half with the easy-to-use Pro Shelf Drilling Jig!

Overview

Just lay the jig on your stock, tighten the two horizontal tracking knobs and start drilling error-free rows.

  • Guarantees each row is perfectly in line
  • Spaces each hole exactly 37mm from the edge of your stock
  • Jig is easy to set up and easy to adjust for multiple rows
  • Rows are spaced exactly 1-1/4" (32mm) apart
  • Pin holes are set back exactly 1-7/16" (37mm) from each edge
  • 32mm spacing and 37mm setback are fully compatible with the Euro hinge system
  • 24" long twin template tracks are joined by rigid rails that lock in place for error-free drilling
  • Drill two rows with one jig to save time and ensure accuracy
  • Locking 3-star tracking knobs allow for adjustments and ensure the jig stays firmly in place
  • Reversible guide rails have a smooth aluminum surface on one side and a rubber fence on the other for better gripping power
  • Includes two 5mm and two 1/4" indexing pins that eliminate the need for clamps and allow you to extend long rows of holes indefinitely
  • Included indexing pins store conveniently in the ends of each guide rail when not in use
  • Drilling template is made of thick acrylic for durability
  • Designed for un-assembled cabinet components from 8-1/4"W to 25-1/4"W

Self-Centering Drill Bits:

Self-centering bits are pre-set to bore a consistent depth for perfect fitting shelf pins and sleeves every time. No adjustments are necessary! Various bit sizes available separately for both shelf pins and shelf pin sleeves. Decorative metal shelf pin sleeves provided added shelf strength.

  • #40604 - 1/4'' Bit for 1/4'' Shelf Pin
  • #40608 - 5mm Bit for 5mm Shelf Pin
  • #41983 - 9/32'' Bit for 1/4'' Shelf Pin Sleeve
  • #41981 - 7/32'' Bit for 5mm Shelf Pin Sleeve

Tech Spec

Brand Rockler
Weight (lbs) 5.2800
Type Shelving

What's included:

(1) Pro Shelf Drilling Jig (2) 1/4'' Indexing Pins (2) 5mm Indexing Pins

Technical Downloads:

Reviews

Customer Reviews

18 Review(s)

View All

Awesome jig!

Russell Posted December 9, 2014
This jig made drilling shelf pin holes easy and painless. No need to worry if they line up front to back or if the holes are the same distance from front or back. I highly recommend this jig for any one who wants level shelves.

A Must Have

Lyndan Posted October 18, 2014
This is the jig to use if you have to drill numerous shelf pin holes. When I purchased it, I did not read the entire description which said the minimum width of the material to be drilled was 8.5 inches. I was using 8 by and 6 by stock so I was initially dismayed, but I discovered I could remove the tiny set screw on the rails which would allow the jig to close down sufficiently to accommodate my 8 by boards. I could then hold the 6 by against fixed side and the holes would ultimately line up perfectly with the 8 by holes. This jig is great! All the holes lined up perfectly!

This Jig is a no brainer...

Guest from Novar, Ontario, Canada Posted December 8, 2012
This Jig is a no brainer !! Just buy it . It works great . It would be nice if it hand some kind of clip so you could store the drill bit with the Jig .

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Videos

  • Pro Shelf Drilling Jig Review: NewWoodworker

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X