Customer Reviews and Photos for:
Glu-Bot Glue Bottle or Babe-Bot Glue Bottle
|
Average Rating:
4.1
(16 customer reviews)
Add your review...
|
|
|
1) Submitted by
Russ, from Baltimore, MD
on 12/4/2012
Customer Rating: 
I ordered a baby bot and it came with a cracked cap. Rockler replaced it. I set the new one on my work bench empty for about 2 weeks and when I went to fill it , that cap was also broken.
|
|
2) Submitted by
Nature's Knots Custom Furniture, from Leicester, NC
on 8/25/2012
Customer Rating: 
By far the best way to apply glue. I actually save time by cutting down on clean up and unplugging conventional bottle tips. Saves glue and put the glue right where I need it, even upside down. Great product.
|
|
3) Submitted by
Jim Hoffman, from Banning, CA
on 2/15/2012
Customer Rating:
The Babe-Bot simply makes it all a little easier. Very nice product.
|
|
4) Submitted by
Aaron Brown, from Dalton, GA
on 1/16/2011
Customer Rating:
I bought the 16 oz bottle. It is the best glue bottle I've ever had. I buy glue by the gallon, so the large cap makes it easy to refill. I would highly recommend this bottle.
|
|
5) Submitted by
Erick, from Methuen, MA
on 12/13/2010
Customer Rating:
I bought two of each size, and perform great. The smaller size works great for detail work! Highly recommend these bottles.
|
|
6) Submitted by
Tom Biesterfeld, from Colorado Springs, CO
on 11/6/2009
Customer Rating:
So far, so good. Easy to open, glue channel stays clear. Has an unrestricted flow of glue. Now if the bottle only had some way of attaching the glue nozzle cap to the bottle so it doesn't get misplaced.
|
|
7) Submitted by
john freid, from rockville , MARYLAND
on 8/14/2009
Customer Rating:
Best purchase I have made.
|
|
8) Submitted by
Bill Clinton, from N little Rock, AR
on 1/22/2009
Customer Rating:
I should have bought one of these years ago. Simply awesome.
|
|
9) Submitted by
Patrick, from Berwick, PA
on 1/18/2009
Customer Rating:
This is the BEST glue bottle I have seen in some time. As I use glue by the gallon, it is very easy for refilling. And softer plastic means easier dispensing. Fantastic product!
|
|
10) Submitted by
Robert, from Lubbock, TX
on 1/9/2007
If you build furniture,go for the babe bot it's awesome for fine detail gluing. If you are a cabinet builder or just want a awesome no spill glue bottle buy the glue bot. I have both and I will not use a stock bottle again.
|
|
11) Submitted by
SeaWolf's Home Workshop Blog, from Jacksonville , FL
on 5/22/2008
Customer Rating:
I really like this glue applicator as it eliminates the mess while always maintaining the glue supply when upright. The Glu-Bot is a handy addition to any shop.
|
|
12) Submitted by
David Tune, from Worden, IL
on 6/18/2009
Customer Rating: 
I like the glue bottle. It is easy to use. The only thing I don't like is the applicator split the first time I used it today. It is soft and easy to squeeze.
|
|
13) Submitted by
Jeff Super, from Lakewood, WA
on 8/20/2011
Customer Rating:
In addition to the other favorable comments I`d add: It`s very cool to be able to glue in any angle without it losing it`s flow of glue well maybe not upside down!. Wish they sold replacement nozzles as mine is wearing down from use at work as a cabinet builder. Did I mention it`s a no-drip bottle and easily controllable?
|
|
14) Submitted by
Bob , from Casselberry, FL
on 8/30/2011
Customer Rating: 
I purchased one of each size Glu-Bots for use with Tite-Bond III glue. The dispensers are nice is some ways, but I have had consistent problems with the applicator tips clogging with dried glue. Almost every time I go use either one of the dispensers, I have to remove the tip and attempt to clean out glue clogs. I always reinstall the tip caps after each use, but apparently the residual glue in the tip fails to drain back into the dispenser, and starts drying out. I have had less problems with the regular Tite-Bond glue containers that with either of these two dispensers. I will probably go back to using the glue vendor's dispenser.
|
|
15) Submitted by
Janet, from Tarpon Springs, FL
on 1/6/2013
Customer Rating:
Both arrived with cracked caps. Definitely a design flaw as both were cracked in the same place. While not a very expensive gift, this came from my husband's sister who knows his passion for woodworking and wanted to find something unique, but sadly, it is not usable.
Editor's note: Our customer service team at 800-376-7856 is available to assist with replacement of damaged caps Janet.
|
|
16) Submitted by
John Williams, from Vancouver, WA
on 6/8/2008
Customer Rating:
Works great for yellow glue. I bought this one for rue glue. The rue glue ate the seal under the top lid and I was unable to use because it has to be air tight. Quick fix I screwed the top on with clear food wrap and fixed the problem.
|
Finishing, Sanding, and Glues 
(0 Items)