Customer Reviews and Photos for:
Accuride® 3732 Low Profile Slides
|
Average Rating:
4.8
(14 customer reviews)
Add your review...
|
|
|
1) Submitted by
Travis Kilpack, from Bountiful, UTAH
on 6/20/2011
Customer Rating: 
Easy to install. I also used the optional mounting brackets and found them to be very strong and easy to use as well. Perhaps my only comment would be that for a 12" slide they are rather tight. But otherwise they slide great and work very well.
|
|
2) Submitted by
Howard J, from Damascus, OR
on 3/27/2011
Customer Rating:
I had never made drawers before and decided on using these slides for a new project. Once I overcame my fear and installed the drawer slides, I found them easy to install and they worked great. Another thing was I had order the first four slides a year before using them and during that time I changed the design and needed one more and they were the same so no mis-match. Ain't life great
|
|
3) Submitted by
Lee Meyer, from Bakersfield, CA
on 1/9/2009
Customer Rating:
I use these slides on sliding shelves for my computer, printer and Fax machine in my custom desk. The lower profile makes them less visible and they slid eeasily for all of the equipment
|
|
4) Submitted by
Mike Helle, from Tampa, FL
on 12/25/2008
Customer Rating:
Slides much smoother than other slides I've used in the past. I like the spring loaded buttons for drawer removal over the levers on other slides.
|
|
5) Submitted by
Bryan Hand, from Elgin, IL
on 8/27/2008
Customer Rating:
My sister loves these slides I put in her custom pantry cabinet in her kitchen. Built well, slides well, screws included and 100 lb rating is more than enough for most purposes.
|
|
6) Submitted by
Jeff Upchurch, from Yorktown, VA
on 6/7/2008
Customer Rating:
Excellent slides. Using the face frame brackets made installation easy. Once the kitchen drawers are retrofitted I'm using these to install pull shelves in the base cabinets.
|
|
7) Submitted by
Pete Prentice, from Deerfield , NH
on 6/6/2008
Customer Rating:
Excellent product for a reasonable price - slides were easily installed and provide a smooth action. They appear to be more than strong enough to provide years of service. The full extension is a huge benefit. I doubt that I will consider anything else on future projects.
|
|
8) Submitted by
David Fortin, from West Hartford, CT
on 3/14/2008
Customer Rating:
Install easily, work great. Have a kitchen full of them.
Most importantly, my wife loves them. The best and a good value.
|
|
9) Submitted by
Tim Anklam, from El Paso, TX
on 3/6/2008
Customer Rating:
I have used Accuride drawer slides on most of my projects with drawers, (kitchen, bathroom, desks, work bench) and consider them the best. On occasions I have purchased some at the home centers and find the price the same or higher and the quality far inferior to Accuride.
|
|
10) Submitted by
Robert Troutman, from Torrance, CA
on 2/4/2008
Customer Rating:
Great alternative to slide series 3832. Has "semi-positive closure, is very durable and 18" slide is 20% less than 3832 slide, saving me $75 in my kitchen remodel. Easy to install.
|
|
11) Submitted by
Brian Key, from Thaxton, VA
on 1/24/2008
Customer Rating:
Great product. Easy to install, works great. I used the face frame brackets, which greatly sped up the installation in my cabinets. I'll use them again.
|
|
12) Submitted by
Robert Vacovsky, from Hillsboro, TENNESSEE
on 12/30/2007
Customer Rating:
easy to install durable works great for new draws i would buy again price ok
|
|
13) Submitted by
Paul, from Bend, OR
on 4/24/2011
Customer Rating: 
I love anything Rockler, but I have to say that these slides are a bit of a disappointment. They work fine once they're installed, but but getting there takes some patience. Here are my complaints:
1-They're greasy. I know all slides have lubricant on them, but these are really greasy for some reason - worse than any I've ever used. I'm constantly wiping my hands on a rag. I use a lot of light-colored baltic birch drawer stock, and even with the constant wiping I got fingerprints on the wood.
2-The plastic drawer releases are cheap and inconsistent. Sometimes they release easily, and other times they don't.
3-I don't like any product that tells me to refer to a website for the rest of the instructions. I - like I assume most of you - don't have a computer or Internet access in my shop. Full instructions need to be packaged with the product.
As I say, they work fine once they're installed. But overall, they're not up to usual high standards.
|
|
14) Submitted by
James, from Lenox, MA
on 9/15/2007
Customer Rating:
It came with the installation instructions and was very easy to install. It appears to be very durable as I used this to repair a drawer slide that was of very low quality.
|
Hardware 
(0 Items)
