Incra Miter Gauge 1000

Unbeatable accuracy at an affordable price! Includes solid steel laser-cut protractor head, 18" track fence and sliding stop positioner. Whether it's your basic 90° cut-off, simple pictures frames, complex compound miters, or a 20-sided object, the Miter Gauge 1000 delivers perfect repeatable accuracy every time.

More...

Technical Details:

Precision angle indexing teeth are laser cut in solid steel to lock in 41 positive ° range.
Plus 1/2 ° vernier cursor.
Special stops at 22-1/2 ° and 67-1/2 °.
GlideLOCK Miter Bar with six expansion points allows you to adjust both sides of the bar for zero side play, anti-friction travel on all table saws with standard (or near standard) miter gauge channels. This means the bar won't wiggle around in the miter slot!
With 18'' Incra track fence and Incra sliding stop positioner.
Accurate enough to produce gap-free hairline glue joints on the mitered corners of any multi-sided object without trial-and-error setups.

Back to overview

Customer Reviews and Photos for:
Incra Miter Gauge 1000

Average Rating:

4.9
(9 customer reviews)

$109.99

Add your review...

1) Submitted by Charles Prejean, from Orange, TX on 6/14/2011

Customer Rating:

I own several Incra products that are excellent tools and this Miter Gauge 1000 is no different. I adjusted the nylon disc to fit my table saw miter slot,squared the fence with my blade and slid on a sub-fence and dialed in the 67.5 deg. and cut some miters for a flag case and they were dead on. Great tool!!!!

2) Submitted by Leo T. Henigin, from Natrona Hgts, PA on 7/17/2009

Customer Rating:

It is so refreshing to have a good accurate tool. I don't know how I got along without it.

3) Submitted by Gary Branson, from Pueblo, CO. on 4/3/2009

Customer Rating:

Love it, great tool, should have bought one sooner, far better than the one that came with my table saw.

4) Submitted by Jeff Moncrief, from Brandon, MS on 10/23/2008

Customer Rating:

Definitely a plus to use on the table saw over stock miter guages. Knowing what I know now, I'd have bought one sooner. Definitely tighter in the miter slot and adjustable to fit.

5) Submitted by Mike Rosenstock, from Albuquerque, NM on 7/30/2008

Customer Rating:

I love it! Set it up and proceeded to make a bunch of tenons for my new router table. A pleasure to use.

6) Submitted by Doug Palmer, from Jackson, MO on 5/30/2008

Customer Rating:

This is THE miter gauge to buy. Super easy to use when using standard angles. Accuracy is exceptional. Read the manual to set special fractional degrees (other than 22.5 or 67.5 deg), they're still easy. I guarantee your old miter guage will never get used again, unless you put it in a yard sale. The price may sound like a lot of money for a miter guage, but you will not be disappointed. Twice as nice as the Krieg at half the price.

7) Submitted by David M, from Denver, CO on 1/4/2008

Customer Rating:

I love this Miter Gauge! It seems to have the best features for the price.
Assembly was negligible.
It is very accurate. (As Incra claims.)
The micro adjustment instructions were simple to understand and use. It comes in handy for the small tweaking, just as it should.
So it doesn’t get misplaced, the built in stop can be relocated to the back of the face when dealing with longer pieces.
Caveats:
Making sure you keep track of the hex wrenches if you need to adjust it.
Remember, the built in ruler is great for measuring the length of pieces but NOT the length of cut. Unless you never readjust the face, you cannot cut it to render a length of cut measurement. As soon as you have to readjust it for an alternate side or angle it will not be accurate

8) Submitted by Ron McKinney, from Aberdeen, WA on 9/16/2007

Customer Rating:

It was so easy to setup and get started with that I was amazed. Don't know why I didn't get one sooner insted of fighting the one that came with my old (1994) Craftsman table saw.

9) Submitted by Steven Michael Howard, from Greer, SC on 4/30/2006

INCRA's miter V27 worked so well that I had to buy this miter 1000 for my Grizzly table saw. The miters are so easy to adjust for first use. From then on you just use it.Oncr you have one you will throw away your original miter with no after thought.

Incra Miter Gauge 1000

Customer Reviews and Photos for: Incra Miter Gauge 1000

Customer Reviews and Photos for:
Incra Miter Gauge 1000