- Overview
- More Info
- Reviews
- Videos
Unbeatable accuracy at an affordable price! Includes solid steel laser-cut
protractor head, 18" track fence and sliding stop positioner.
Whether it's your basic 90° cut-off, simple pictures frames, complex compound
miters, or a 20-sided object, the Miter Gauge 1000 delivers perfect repeatable
accuracy every time.
|
Technical Details:
- Precision angle indexing teeth are laser cut in solid steel to lock in 41 positive ° range.
- Plus 1/2 ° vernier cursor.
- Special stops at 22-1/2 ° and 67-1/2 °.
- GlideLOCK Miter Bar with six expansion points allows you to adjust both
sides of the bar for zero side play, anti-friction travel on all table saws with
standard (or near standard) miter gauge channels. This means the bar won't
wiggle around in the miter slot!
- With 18'' Incra track fence and Incra sliding stop positioner.
- Accurate enough to produce gap-free hairline glue joints on the mitered corners of any multi-sided object without trial-and-error setups.
|
| |
Customer Reviews and Photos for:
Incra Miter Gauge 1000
|
Average Rating:
4.9
(9 customer reviews)
$109.99
Add your review...
|
|
|
1) Submitted by
Charles Prejean, from Orange, TX
on 6/14/2011
Customer Rating:
I own several Incra products that are excellent tools and this Miter Gauge 1000 is no different. I adjusted the nylon disc to fit my table saw miter slot,squared the fence with my blade and slid on a sub-fence and dialed in the 67.5 deg. and cut some miters for a flag case and they were dead on. Great tool!!!!
|
|
2) Submitted by
Leo T. Henigin, from Natrona Hgts, PA
on 7/17/2009
Customer Rating: 
It is so refreshing to have a good accurate tool. I don't know how I got along without it.
|
|
3) Submitted by
Gary Branson, from Pueblo, CO.
on 4/3/2009
Customer Rating:
Love it, great tool, should have bought one sooner, far better than the one that came with my table saw.
|
|
4) Submitted by
Jeff Moncrief, from Brandon, MS
on 10/23/2008
Customer Rating:
Definitely a plus to use on the table saw over stock miter guages. Knowing what I know now, I'd have bought one sooner. Definitely tighter in the miter slot and adjustable to fit.
|
|
5) Submitted by
Mike Rosenstock, from Albuquerque, NM
on 7/30/2008
Customer Rating:
I love it! Set it up and proceeded to make a bunch of tenons for my new router table. A pleasure to use.
|
|
6) Submitted by
Doug Palmer, from Jackson, MO
on 5/30/2008
Customer Rating:
This is THE miter gauge to buy. Super easy to use when using standard angles. Accuracy is exceptional. Read the manual to set special fractional degrees (other than 22.5 or 67.5 deg), they're still easy. I guarantee your old miter guage will never get used again, unless you put it in a yard sale. The price may sound like a lot of money for a miter guage, but you will not be disappointed. Twice as nice as the Krieg at half the price.
|
|
7) Submitted by
David M, from Denver, CO
on 1/4/2008
Customer Rating:
I love this Miter Gauge! It seems to have the best features for the price.
Assembly was negligible.
It is very accurate. (As Incra claims.)
The micro adjustment instructions were simple to understand and use. It comes in handy for the small tweaking, just as it should.
So it doesn’t get misplaced, the built in stop can be relocated to the back of the face when dealing with longer pieces.
Caveats:
Making sure you keep track of the hex wrenches if you need to adjust it.
Remember, the built in ruler is great for measuring the length of pieces but NOT the length of cut. Unless you never readjust the face, you cannot cut it to render a length of cut measurement. As soon as you have to readjust it for an alternate side or angle it will not be accurate
|
|
8) Submitted by
Ron McKinney, from Aberdeen, WA
on 9/16/2007
Customer Rating:
It was so easy to setup and get started with that I was amazed. Don't know why I didn't get one sooner insted of fighting the one that came with my old (1994) Craftsman table saw.
|
|
9) Submitted by
Steven Michael Howard, from Greer, SC
on 4/30/2006
INCRA's miter V27 worked so well that I had to buy this miter 1000 for my Grizzly table saw. The miters are so easy to adjust for first use. From then on you just use it.Oncr you have one you will throw away your original miter with no after thought.
|
Home  Power Tools and Shop Accessories Table Saws and Table Saw Accessories Table Saw Miter Gauges, Tenoning Jigs and Fences Incra Miter Gauge 1000 
|
(0 Items)
