All-In-One Clamp Guides

The first zero-deflection straight edge clamping guide! Provides you with straighter and more accurate cuts, dadoes and routing without additional clamps. New and improved design features:

30% wider integral clamping jaws for tighter clamping and less marring of wood.
50% wider locking lever for quick, easy clamping of guide.
Full-color measuring scale with large numbers (in 1/4" increments).

The perfect woodworking combination clamp and edge guide!

Integral clamping jaws and locking lever provide a quick, easy way of clamping the guide.
Features instant edge-to-edge clamping, low profile with no obstruction, extra long handle and 1-3/4" wide extrusion.
Built-in T-track on top of the guide allows you to use any of our versatile accessories or shop-made jigs.
Optional router base plate and circular saw plate lock onto T-track and provide perfect tracking along straight edge; HDPE construction.
Aluminum squaring attachment has extra wide jaws and provides accurate square-up for guide system. Measures 7/8'' high x 3-3/4'' wide.
Create your own shooting board for routing or cutting with the circular saw.

Please Note: To engage the jaw the first few times, the "I"-shaped blue finger-grip MUST be pushed snug against the sliding jaw for the jaw to lock. Squeeze together until it clicks. Then push the finger-grip AWAY from the jaw to unlock sliding jaw.

The following optional accessories are also available:

All-in-One Guide Operation Sheet

Customer Reviews and Photos for:
All-In-One Clamp Guides

Average Rating:

(4.0)
(217 customer reviews)
Add your review...

1) Submitted by Jim G., from Gorham, ME on 11/12/2009

Customer Rating:

I like that it is light weight. The clamp is adaquate to keep it in place. I'll probably only use it as a straight edge and cutting 4 x 8 plywood into smaller desired pieces.

2) Submitted by Carol, from Pahrump, NV on 11/11/2009

Customer Rating:

Good price. Could have better instructions. All in all works great.

3) Submitted by Don, from Aberdeen, SD on 10/21/2009

Customer Rating:

What I ask of a tool is that it be easy to use and do what it is suppose to do. This clamp qualifies on both counts.

4) Submitted by Chuck Sturges, from El Cajon, CA on 10/10/2009

Customer Rating:

I was a little disappointed with the length of the clamp jaws which measured 9/16". My other similar, but shorter, clamps have clamp jaws measuring 1 1/2 ", which makes the grip much more stable. Other than that, I am quite satisfied with the clamp and especially like the tape measures on each side of the bar. The price value was excellent.

5) Submitted by RA, from Stanardsville, VA on 10/2/2009

Customer Rating:

Excellent addition to any workshop. I was skeptical at first - that disappeared after the first use. No more clamps to worry about when cutting. This clamp snaps into place and stays there. Straight and angle cuts are easy to do.

6) Submitted by Westcott, from League City, TX on 9/28/2009

Customer Rating:

Works as advertised and has a good warranty. Main selling point since my last one broke but was made by someone else with no such warranty. This clamp really makes routing a snap on larger pieces or when your table router is setup for another process. Also makes 4x8 sheets easier to wittle down to size before dragging them to the table saw or in the shop. I also like the accessory capabilities. I will have to get one or two of them.

7) Submitted by Andy Blair, from Muskegon, MI on 9/21/2009

Customer Rating:

I was skeptical when I first bought it to use for cutting, but used it to cut rabbets in a dresser and it was fantastic. Even when the bit got dull the clamp held its place. I'd recommend this clamp to anyone.

See all 217 reviews...

Customer Reviews and Photos for:All-In-One Clamp Guides

ALSO VISIT:

Customer Reviews and Photos for:
All-In-One Clamp Guides