Universal Fence Clamps

These compact, lightweight Fence Clamps allow you to secure a huge variety of shop-made auxiliary fences to your existing fences without having the clamp interfere with your work. The clamp arm simply fits into a 3/8" hole in the top of the auxiliary fence, keeping it out of the way. That means no more clunky wood screws and C-clamps and no need to screw into your expensive fence! Works great for table saws, band saws, cutoff saws, router fences and more. Clamps can be used singly as stop blocks, or in pairs for sacrificial fences, half-fences, resaw fences, and a variety of other fixtures. One set of clamps will do it all! Includes 2 clamps.

Rigid aluminum body with steel threaded components. Range of travel 1/2"-5-3/4" (1/2" minimum assumes a 3/4" auxiliary fence; you can clamp to an even thinner primary fence if you use a thicker auxiliary fence). Drill a 3/8" hole in the auxiliary fence.

Related Blog Posts:  A Fence Clamp That Stays Outta Your Way

Customer Reviews and Photos for: Universal Fence Clamps Average Rating: (4.6) (216 customer reviews) Add your review...

1) Submitted by Joseph A.Saggiomo, from Sewell, NJ on 10/27/2009 Customer Rating: The clamp is a gem. I have a very expensive rip fence on my tablesaw and it would be impossible to try and drill thru the fence to install an auxiliary fence. You do need to install a piece of felt or other product so that the clamp does not walk when tightening.

2) Submitted by Don Stutsman, from Spring Branch, TX on 10/16/2009 Customer Rating: Slick device, very user friendly and saves my expensive fence.

3) Submitted by G. Carter, from Saratoga, CA on 10/15/2009 Customer Rating: This is the third set I have purchased. They make rip fence blocks/guides an order of magnitude easier to use.

4) Submitted by J. Reich, from York, PA on 9/29/2009 Customer Rating: I am using these clamps on a Shop Fox fence to hold a 3/4" MDF subfence. Keep the threaded part of the "L" shaped bolt as short as possible to prevent the subfence from pulling away at the bottom. It might also be advisable to drill the holes in the subfence at a slight angle so that the clamping force is directed towards the bottom.

5) Submitted by Paul Murray, from Casselberry, FL on 9/29/2009 Customer Rating: These Universal Clamps are so useful with so many applications that I ordered two pair. The ease of use and on virtually any item (Table Saw, Router, Band Saw etc)in your shop. All it takes is drilling a hole or two in your auxiliary fence and you are in business.

6) Submitted by Marvin Mickelson , from Bella Vista, AR on 9/4/2009 Customer Rating: Have not had a chance to use yet, but I am sure they will work like there designed to.

7) Submitted by Mark Andersen, from Albuquerque, NM on 8/19/2009 Customer Rating: Superb product. I used it for a router fence assembly on the left wing of my table saw.

See all 216 reviews...