Customer Reviews and Photos for:
Drawer Sides
|
Average Rating:
4.3
(12 customer reviews)
Add your review...
|
|
|
1) Submitted by
JR Gustafson, from Knoxville, TN
on 6/12/2011
Customer Rating: 
For an absolute novice woodworker, this product is a great help. Easy to work with and makes a great drawer.
|
|
2) Submitted by
Darren Sroufe, from Boonville, IN
on 5/10/2011
Customer Rating:
Good quality. Excellent time saver. Nice product for a nice quality final project.
|
|
3) Submitted by
NH Barnes, from Athens, NY
on 1/15/2011
Customer Rating:
Perfect time saver resulting in a professional looking drawer. I'm reordering.
|
|
4) Submitted by
Wayne Gregory, from Audubon, PA
on 8/31/2009
Customer Rating: 
This is a nice timesaver on any drawer project. Reasonable quality and fit. Saved me from handling, ripping and routing stock material. I would buy again.
|
|
5) Submitted by
Russ H, from Bakersfield, CA
on 4/6/2009
Customer Rating:
Exactly what I was looking for. Slightly undersized, but wasn't an issue. An excellent time-saver.
|
|
6) Submitted by
Pam Schindel, from Aurora, IL
on 3/17/2009
Customer Rating:
We needed to replace the sides of some drawers in our kitchen that had worn badly over the 50 or so years. This was an easy project although the groove was slightly narrower than we needed, so we routed it a little wider. Good quality stock. Thanks.
|
|
7) Submitted by
Ted Kloba, from Franklin Park, IL
on 12/1/2008
Customer Rating:
Good quality stock, and a nice labor saver. They're a bit thinner than 1/2". Could be improved if the top edge were rounded over.
|
|
8) Submitted by
Philbrook Sargent, from Apopka, FL
on 6/8/2008
Customer Rating:
Just what I have been looking for to build a drawer that the builder left out of our bathroom. The size and length were just right to make the drawer, 25" x 20" to fit into a 27" x 5" blank.
|
|
9) Submitted by
Bob Tienor, from Schertz, TX
on 12/19/2007
Customer Rating:
Quality product for building drawers without all the hassle of having to manufacture the framework pieces.
|
|
10) Submitted by
Jason Campbell, from Waukegan, IL
on 11/6/2007
Customer Rating:
Great product when time is a factor and machining your own plywood is not an option.
|
|
11) Submitted by
Tom Ferguson, from Charlotte, NC
on 8/2/2009
Customer Rating: 
Grove for drawer bottom is 1/4 inch from edge which makes it unacceptable for Blum Tandem slides. Plywood finish is softer than birch plywood I am familar with (more like sandply) and requires more sanding before and after the first coat of sealer or finish.
|
|
12) Submitted by
David Thompson, from Smithfield, NC
on 3/6/2008
Customer Rating: 
The quality of the plys is great. The length and width are dead-on, as advetised. But the thickness is not a full 1/2". All of the pieces I received measured at .462". Although this may be insignificant to some, it depends heavily on whether or not your dovetail jig can effectively clamp thicknesses less than 1/2". My Leigh Superjig won't, unless I use shims.
|
Hardware 
(0 Items)
Our
solid birch veneer plywood drawer sides are ready-made, for fast drawer assembly.