- Overview
- More Info
- Reviews
Top quality router bits that meet the high standards of Rockler Woodworking and Hardware.
Includes smaller bearing and wrench for beading applications at no additional charge.
Items with * in the description are larger bits that should be used in router tables at reduced RPM.
| Item
No. |
A |
B |
C |
| 22804 |
1" |
1/2" |
1/4" |
| 24929 |
5/8" |
3/8" |
1/4" |
| 28429 |
3/4" |
3/8" |
1/4" |
| 26078 |
1" |
1/2" |
1/2" |
| 21862 |
13/16" |
3/8" |
1/4" |
| 27241 |
7/8" |
3/8" |
1/4" |
| 26628 |
1-1/8" |
1/2" |
1/4" |
| 28999 |
1-1/4" |
5/8" |
1/4" |
| 27713 |
5/8" |
3/8" |
1/2" |
| 22238 |
3/4" |
3/8" |
1/2" |
| 27402 |
13/16" |
3/8" |
1/2" |
| 21026 |
7/8" |
3/8" |
1/2" |
| 21936 |
1-1/8" |
1/2" |
1/2" |
| 29340 |
1-1/4" |
5/8" |
1/2" |
| 24632 |
1-1/2" |
3/4" |
1/2" |
| 29083 |
1-3/4" |
7/8" |
1/2" |
| 23233 |
2" |
1" |
1/2" |
| 26314 |
2-1/4" |
1-1/8" |
1/2" |
| 26799 |
2-1/2" |
1-1/4" |
1/2" |
| 29931 |
3" |
1-1/2" |
1/2" |
|
| A
fantastic value on high quality router bits. These bits are
competitively priced while offering high performance and long
life.
Quality
performance features include:
- K10
and K20 grade carbide for clean cutting action.
- Final
sharpening with 600 - 800 grit diamond wheels.
- Precision
balanced for smooth operation.
- Baked-on
anti-stick coating to reduce pitch and resin buildup.
 If
you are not 100% satisfied with these bits, send them back for
a refund. |
Router
Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.
1) Rockler recommends using 1/2'' shank router bits whenever possible.
1/2'' shanks provide better stability with less vibration to produce a smoother
cut and longer cutter life.
2) Make multiple light passes rather than one heavy cut.
3) Install your router bit so that 90% of the shank is inside the
collet. Here's a rule of thumb: fully insert the bit, then pull it back
1/16 to 1/8 of an inch.
4) Use a router table whenever possible.
5) When using large diameter bits, reduce the RPM of your router.
Then test your set-up on scrap lumber.
6) Always follow your router manufacturer's recommendations. |
|
| |
Customer Reviews and Photos for:
Roundover/ Beading Router Bits
|
Average Rating:
4.9
(13 customer reviews)
$23.99
Add your review...
|
|
|
1) Submitted by
Roy Bullis, from Laguna Hills, CA
on 4/6/2010
Customer Rating:
I've been using Rockler's 1" roundover bits for the last 6 years in one step of the shaping process for guitar necks. These bits are consistently high quality and affordable.
|
|
2) Submitted by
Bert Forest, from Norwood, MA
on 12/1/2009
Customer Rating:
I used a 1/4 inch shank 3/8-inch round over bit to complete my storage cabinets base. I was pleased with the ease of use and the results.
|
|
3) Submitted by
Steven D. Morton, from Salem, MO
on 11/8/2009
Customer Rating: 
I am repairing the belfry and steeple of a church built in 1881. I have had to repair and replace several parts that were not standard mill pieces. This Rockler bit allowed me to manufacture a structural yet ornate trim to match the existing trim, and maintain the historical integrity of the structure. It has been a tedious yet rewarding project, helped in part by Rockler's inventory of excellent tools.
|
|
4) Submitted by
Daryl's Custom Woodshop, from Tulsa, OK.
on 10/2/2009
Customer Rating:
Very good quality bit and I'm looking forward to purchasing more.
Custom daybed for a client built in my shop.
|
|
5) Submitted by
Jeff , from Lafayette, AL
on 6/11/2009
Customer Rating:
The bit was sharp and performed as expected.Quality product,Reliable,big cut.
|
|
6) Submitted by
James Zytowiecki, from Brunswick, OH
on 1/17/2009
Customer Rating:
Quality product. Reliable, well built. Lasts me months using same bit weekly over hundreds of uses before needs resharpened.
|
|
7) Submitted by
John, from Savannah, GA
on 8/1/2008
Customer Rating:
The router bit arrived properly packaged and protected from potential shipping damage and rust. The bit was sharp and performed as expected.
|
|
8) Submitted by
Ray Age, from Joelton, TN
on 5/4/2008
Customer Rating:
When adding a 1/16" accent round there's not much room...or time...for chatter. Nothing left to do but light sand & finish. Great bit, Rockler!
|
|
9) Submitted by
John Riggs, from Harbor Springs, MI
on 1/20/2008
Because I make fully functional bows for hunters and target shooters, and I don't laminate or back the bows to reinforce them to guard against failures, Each step of the process demands close attention to detail. Through the series of fixtures I use to shape the bows, each of my 6 routers and their bits need to work perfectly every time and this Rockler Bit functions perfectly. It's heavy, very well made, sharp, and I am very pleased with my purchase. It is a truly great router bit with enough carbide for many sharpenings to come. Thank you Rockler for a great product!
|
|
10) Submitted by
Tom Mann, from Wooster, OH
on 12/26/2007
Customer Rating:
Bit worked flawlessly and produced a perfect finish. Product was shipped immediately.
|
|
11) Submitted by
Vareck Walla, from Katy, TX
on 12/15/2007
Customer Rating:
Had to add a 1" radius to a 7/16" board for a precast shape mold I was making. Worked flawlessly. Excellent bit! Very smooth finish...did not have to sand out any chatter marks.
|
|
12) Submitted by
Leonard Schroeder, from La Vernia, TX
on 11/12/2007
Customer Rating:
This is one of two end tables built for my customer. The legs are walnut and the rest of the table is cherry. The table top edges were treated using the Rockler 1/16" roundover bit. The finish is Watco Cherry Danish Oil with five coats of wipe on poly.
|
|
13) Submitted by
Peter Ross, from Bolton, MA
on 4/18/2008
Customer Rating:
We are restoring a Victorian home and rather than strip paint from moulding, we prefer to replace with new of an identical pattern. Purchasing from a specialist moulding supplier is expensive, but a pair of Rockler router bits did a perfect job on clear pine stock so they've paid for themselves already, not counting my time.
|
Home  Routers and Accessories Router Bits Cove and Round Over Router Bits Roundover/ Beading Router Bits 
|
(0 Items)
