Customer Reviews and Photos for:
17-Piece Universal T-Track Kit
|
Average Rating:
4.7
(45 customer reviews)
$24.99
Add your review...
|
|
|
1) Submitted by
Kenneth, from Peoria, ILLINOIS
on 1/17/2012
Customer Rating: 
I just received this today. I'm impressed with the quality of the product. More so, I am really impressed with Rockler's service. I ordered this on the 13th and received it today, the 17th. It doesn't get better than that.
|
|
2) Submitted by
William Diggs, from Pinson, TN.
on 6/13/2011
Customer Rating:
My kit worked great. I used it on my tablesaw cut-off sled. The track worked perfectly for a sliding stop.
|
|
3) Submitted by
Don Donath, from Mooresville, IN
on 1/20/2011
Customer Rating: 
I cut short pieces of the track and imbedded them into my work bench right behind my Mini Lathe and made a marlite shield that uses T bolts to fasten it in place while operating my lathe to protect my car in the garage and remove it when I need my full work bench it works great.
|
|
4) Submitted by
David Capps, from Mt. Vernon, IL
on 12/27/2010
Customer Rating:
This is my second kit and it will not be my last. The kit is an invaluably accurate aid when building jigs and fixtures...ANOTHER WINNER FOR ROCKLER!
|
|
5) Submitted by
Jeff Ferguson, from Wingate, NC
on 12/4/2010
Customer Rating:
I bought my first kit a few months ago and liked it so much I got a second kit. Now I'm going to get my third kit. You can't beat the sale price and free shipping. It's nice to be able to use different hardware.
|
|
6) Submitted by
Scott, from Latrobe, PA
on 11/10/2010
Customer Rating:
This is a great starter kit for someone who has never had any t track or a stock of t bolts/handles. I used the kit to attach a fence to my router table/work bench. I'm sure I'll be able to use the other bolts/handles to make a variety of hold downs/jigs for other projects as they come along.
|
|
7) Submitted by
George, from Arroyo Grande, CA
on 10/3/2010
Customer Rating:
worked great making a miter sled. I have found that they are extremely helpful in making jigs and stationary tool tops.
|
|
8) Submitted by
Mel, from Daly City, CA
on 9/23/2010
Customer Rating:
I buy more of these when they are on special from Rockler to have a supply on hand. Have found them to be really helpful in jigs, stationary tool tops, etc.
One improvement might be to add more mounting holes. When I drill and countersink more mounting holes for greater support, I end up banging up the sides and feel bad.
|
|
9) Submitted by
Tom Pynaker, from Green Bay, WI
on 4/24/2010
Customer Rating:
I needed this kit to finish my router table and it is exactly as described! Love it and works great!
|
|
10) Submitted by
Phil, from San Francisco, CA
on 11/4/2009
Customer Rating:
Nice stuff, good quality. I use it everywhere - drill press table, table saw fence, tenoning jigs, miter slot jigs, table saw sleds, etc. The only down point is that I like to use metric Finland ply instead of 1/2" ply for better durability and stability, and this channel is a tad bit too tall for the 12mm Finland. I would've given it 5 stars if they offered a metric version.
|
|
11) Submitted by
Kenneth Handschuh, from Youngstown, FL
on 10/22/2009
Customer Rating:
With everything in the kit I have to want for nothing. I have purchased two and expect to need more.
|
|
12) Submitted by
William Carrothers, from Commerce, MI
on 10/22/2009
Customer Rating:
Great product and combo getting all the screws and T bolts. Used 8 segments to cover the 4x8' table.. Only problem is waiting for them to do the 19.99 special..
|
|
13) Submitted by
Kevin Ingersoll, from Calais , ME
on 9/6/2009
Customer Rating:
I ordered this product to make a portable table to use on the job site. The track was for to make so I could do different jobs. Can be used for a chop saw stand to a router table just by removing and adding different fances. I would rerorder this and would recommend to a friend.
|
|
14) Submitted by
Jerry Prather, from Fresno, CA
on 4/13/2010
Customer Rating:
Should have an outstanding rating. Ordered 4 sets of the t-track kits and used all of it for my drill press table I made and a fence hold down for my table saw. I was most impressed by your shipping department and how everything was shipped to me in a matter of days and in such great containers that I'll find a use for. I passed on to my friends my plans and your address. Thank you again, I will be reordering soon.
|
|
15) Submitted by
Homer Rail
on 8/12/2009
Customer Rating:
I have used the T-Track kit to add clamping capabilities to my work surface and dado jig. It make the work so much easier. I will be buying more for my router table and drill press.
|
|
16) Submitted by
Bill Stanley, from Florence, SC
on 8/6/2009
Customer Rating:
The item & the purchase experience was excellent. Will buy again.
|
|
17) Submitted by
Jim, from Halifax, PA
on 4/6/2012
Customer Rating:
I have four sets of tracks ,for a few years now and I set them up on half of my 4 ft. x 8 ft. work bench. I use them to glue up boards with biscuts. I also made up boards 2 " wide 12" 36 " and 48 " long then I drilled holes in each end to fit the t bolts , they are oak and keep the boards flat as they dry. great tool with many uses, fast shipping.
|
|
18) Submitted by
Stephen Edwards, from Hilham, TN
on 7/26/2009
Customer Rating:
I've bought 5 of these kits. They are so handy that, unfortunately, I'm going to have to buy more, soon! I've used them in my shop built router table, drill press table and a fence that I built for my 6 x 48 combo belt/disk sander.
These kits are well made. I can't imagine why anyone wouldn't be pleased with the quality. The T-Bolts and knobs also work perfectly with the Rockler T-Slot router bit that allows you to cut your own slot in wood, MDF, etc.
|
|
19) Submitted by
Conrad P. Zahn, from Burrillville, RI
on 7/14/2009
Customer Rating:
I purchased the kit to add a hold down and to duplicate cross cuts to my table saws miter gage. The extension was easy to make and my ability to duplicate cut are accurate. I plan to make other jigs for my shop using this system.
|
|
20) Submitted by
James, from Warner Robins, GA
on 7/10/2009
Customer Rating:
I bought this set and used it to build a drill press table. I'm very satisfied with it.
|
|
21) Submitted by
J Poland, from Springville, IA
on 5/25/2009
Customer Rating:
Verry easy to install hole spacing for screws seems to ge good to, solid as the table there in.
|
|
22) Submitted by
Larry Michael, from Chariton, IA
on 5/15/2009
Customer Rating:
I purchased the kit to make a drill press table and jig to make duplicate drilling easier. The product is as advertised and very good, it works well. I would buy again as needed.
|
|
23) Submitted by
Raymond Brooks, from Augusta , KY
on 6/18/2011
Customer Rating:
Very good quality and price,as it was on sale. Used it on a miter saw bench with sliding stops.
|
|
24) Submitted by
R Hicks, from Staunton, VA
on 5/11/2009
Customer Rating:
I used this kit to attach router table and drill press fences. I will be buying more track soon. All the parts are great.
|
|
25) Submitted by
Peter Butzin, from Tallahassee, FL
on 5/19/2009
Customer Rating: 
The problem is that Rockler has changed this item. It used to be 1/2" tall, and I bought a bunch of T-Track to make bench components and jigs. It worked great with standard, 1/2" plywood inserts, which saved having to use a router.
But for some unexplained reason, Rockler started stocking and shipping 3/8" high T-Track. It looks the same; it works the same, but the half inch thick plywood and intersection kits won't work with it.
Don't get me wrong: The quality of the T-Track is fine, but if you're trying to match this with 1/2" high T-Track, it won't work.
(Incidentally, Incra makes a 1/2" high T-Track, but Rockler doesn't sell it.)
This is my first disappointment with Rockler. I just wish that they had indicated in the catalogue, and on the website, that the newer version of the T-Track is a different height.
|
|
26) Submitted by
Charles Bird, from Valparaiso, IN
on 3/24/2009
Customer Rating:
I purchased this set on sale and liked it so much that I ordered another set when it was offered at the sale price again. Like everything I have ordered from Rockler, the quality of the components was excellent, and the price was very reasonable.
|
|
27) Submitted by
Aaron Karcher, from Upper Sandusky, OH
on 3/22/2009
Customer Rating:
I was looking for some T-track and found it here with the assistance of an email to rockler. Bought four sets on sale and was cheaper than just the track anywhere I've seen it. I plan to use them for my custom router table and cabinet and drill press table for now. Bought four so id have enough for any future ideas. WELL WORTH THE PRICE!!!!!
|
|
28) Submitted by
John Fox, from Delafield, WI
on 3/11/2009
Customer Rating:
I used this kit to build an addition to my table saw fence. It consists of a guard and sawdust pickup, similar to the one shown in the current issue of Shop Notes. It worked so well I ordered another for future projects.
|
|
29) Submitted by
Greg Cundiff, from Crab Orchard, KY
on 3/10/2009
Customer Rating:
Took a chance and bought 3 sets, wished I had bought 3 more. I built a sliding carriage panel saw with them and they are very smooth. I am going to buy several more to build a large router cabinet and table. Thanks Rockler for such a great price on such a great item!
|
|
30) Submitted by
Dennis Bernhard, from Roseville, CA
on 3/1/2009
Customer Rating:
Nice product at a very reasonable price. I plan on using this one on my drill press table, and may add another for a router that's mounted under the extentesion wing of my table saw.
|
|
31) Submitted by
Donald Battistone, from Adairsville, GA
on 2/27/2009
Customer Rating:
This was my first purchase from Rockler so I purchased one set to use on my drill press table to see what I would get. I was so pleased that I bought a second set which I am using for my router table and fence on my table saw. I don't know what other reviewers are complaining about not being professional. This kit is as professional it gets. I purchased it on sale for less than the t track itself sells for. It’s a great deal and will make your job look professional.
|
|
32) Submitted by
Tom , from Cicero, NY
on 2/16/2009
Customer Rating:
This is the second one I purchased. I used the first one on my miter saw fence and I plan on using this one on my router table.
Excellent product, I foresee purchasing more in the near future.
|
|
33) Submitted by
Rob, from Memphis, TN
on 10/19/2010
Customer Rating:
Great kit to get started - I'm using this as a center rail for an 8x10 camera, and it's a perfect fit for the job. The special price is a steal, otherwise it's still a good value.
|
|
34) Submitted by
Dale Nick, from Princeton, MN
on 2/8/2009
Customer Rating:
These T-Track packages are very reasonably priced. I bought 2 and used them when I made my router table. It's not the most professional looking table but it works well. The bolts and handles that come with it are very nice and work great.
Thanks Rockler for a good product! But then, nothing I've ordered from Rockler has been bad.
|
|
35) Submitted by
Gilbert Jones, from Chillicothe, IL
on 1/22/2009
Customer Rating:
I have used T-track for making many fixtures, like the combination of T-track, knobs and bolts together.
|
|
36) Submitted by
Gary A. Ledbetter, from Marysville, CA
on 1/20/2009
Customer Rating:
I have used the T-Track, bolts and knobs for a few projects. The track can be cut for custom fitting. I will order more in the future as I create tools and jigs.
|
|
37) Submitted by
Ronald Cunzenheim
on 1/10/2009
Customer Rating:
The product is exactly what was advertised, what I was promised and what I needed.
|
|
38) Submitted by
Phil , from Omaha, NE
on 1/27/2010
Customer Rating:
The $ is well worth the money even the regular price. I tried to find something like this at the local building store but could not. Spent more time and effort than the $ for a easy internet purchase. It would be great to have a store close to peruse the isles but I guess the catalog and the internet will have to do.
Thanks for the prompt service!
|
|
39) Submitted by
Larry Mason, from Savannah, GA
on 12/24/2008
Customer Rating:
I will be ordering more t-tracks for other projects, made a nice drill press table.
|
|
40) Submitted by
Bill Lydie, from Lewiston, ID
on 2/11/2009
Customer Rating:
Reasonably priced and I just purchased my second package to complete my router table. As stated by another reviewer, "not the most professional" but I conclude that they work well and offer you a lot of flexibility.
|
|
41) Submitted by
John Schaben, from La Crosse, KS
on 7/30/2009
Customer Rating:
This last order is the 4th set I ordered. Can't seem to stop finding uses for this thing. Just wish they would offer it with 1/4" hardware. Don't use much 5/16 with what I'm doing and am building up quite a stock of the hardware.
|
|
42) Submitted by
Ben Reese, from Ft. Mitchell, AL
on 6/7/2011
Customer Rating:
I have purchased 6 of these kits over the last couple of years. I have used them for various table saw jigs and fixtures including WOOD's Universal Table Saw Jig by Schlabaugh & Sons. I've also used them in making my own drill press table and router table. The last two I just purchased will be to incorporate in the top of an assembly table that will be used for my assembly jigs in building my furniture. Rockler's work much better for me than the other 3 brands I've used previously.
|
|
43) Submitted by
Terry T, from Orlando, FL
on 6/7/2011
Customer Rating:
Quality components, exactly as described. Using to make a large router table/fence. I will probably buy another at some point to add stops and hold-downs to the table and fence.
A little expensive usually, but a good deal when on sale.
|
|
44) Submitted by
Danny H., from Santee
on 5/6/2012
Customer Rating:
I purchased five of these kits several years ago fand am just now using them up. The new ones I see have holes drilled 4 inches on center. This was needed as the ones I purchased only had a few holes over the entire length. I have plenty of knobs and screws left so I won't be buying any more kits.
|
|
45) Submitted by
O M Gilbreath, from Roswell, GA
on 11/29/2008
Customer Rating: 
This is a fair kit for very light work only.
|
Hand Tools and Shop Accessories 
(1)
