- Overview
- More Info
- Reviews
Enjoy simple installation and precise door alignment with these low-profile, one-piece concealed cup hinges by Salice. Three eccentric cams allow you to quickly and easily adjust the doors in every meaningful direction (side-to-side, up-and-down, and in-and-out) for perfect alignment. Twin-screw attachment to the cabinet frame provides superior stability, while zero door protrusion and a low hinge profile allow pull-out shelves to extend without interference. Made of solid steel, Excen-Three hinges feature a beautiful, corrosion-resistant nickel finish for a lifetime of trouble-free operation. They open to 106° and are available for several levels of door overlay.
Technical Details:
- Self-lubricating
- Self-closing
- Similar boring pattern as Blum hinges (see Tech Document for details)
- Cup diameter: 35mm
- Cup depth: 11mm
- Lifetime warranty
What's in the Box?
Pair of Salice Excen-Three hinges in your choice of Overlay, Matching mounting screws, Instructions and an installation template
 |
The Rockler Advantage:
- Hinges are sold by the pair
- Mounting screws are included
- Mounting plates are included
- Step - by - Step instructions
- Expert guidance and tech support at
1-800-260-9663
- See below for a large selection of JIG-ITs to make installation a breeze
|
106° Opening |
 Salice has been a leader in the hinge industry for over 50 years, making them a favorite choice amongst cabinetmakers and do-it-yourselfers.- Salice hinges are conveniently adjustable, making installation easy.
- Salice is ISO 9001 certified which means that you are assured of consistent quality in every Salice hinge.
- All Salice hinges are come with mounting screws.
|
|
Here's something to consider when selecting face frame hinges...
These hinges are not for use on Eurostyle Cabinets, they are for use on your face frame cabinets only.
Overlay
Applications
Use an overlay hinge if the door overlays the face frame completely, with a rabbet. It can be predetermined or variable. If it is variable, you'll be able to mount it anywhere on the widthe of the face frame and determine how much of the frame will be visible.
Inset Applications
Use an inset hinge if the door is completely flush with the face frame. |
|
Self-closing hinges are an ideal for cabinets. The built-in spring pulls the door closed and holds it in a closed position, eliminating the need for catches.
Soft-closing hinges have an adjustable action that, when your door is pushed closed, automatically takes over and brings your door to a whisper-soft close.
Free-swing hinges are most often used in furniture applications, rather than cabinet applications. |
|
| Use
the chart to determine how many hinges you'll need for the height and weight
of your door.
A door
that is 43'' high and weighs 14 lbs. requires three hinges. If your door
is only 24'' high but weighs 14 lbs., go with three hinges for maximum
support and stability.
Use
on 5/8'' - 3/4'' doors unless otherwise noted. |
 |
|
|
| |
 |
|
Customer Reviews and Photos for:
Salice® Excen-Three Self-Closing Face Frame Hinges
|
Average Rating:
4.6
(34 customer reviews)
$7.99
Add your review...
|
|
|
1) Submitted by
Jim, from Scottsdale, AZ
on 5/26/2011
Customer Rating: 
I had to replace existing hinges with zero clearance hinges on a cabinet in order to install roll-out shelves. These hinges were the perfect replacement for the project, and the standard screw pattern fit the existing holes on the cabinet.
|
|
2) Submitted by
Robert Martlock, from Swoope, VA
on 5/10/2011
Customer Rating:
Very good hinges. Excellent quality. Easy installation. Would buy these again.
|
|
3) Submitted by
Reinaldo Benedetti, from San Mateo, CA
on 4/19/2011
Customer Rating: 
Very good hinges. Easy installation and the adjustments allow to set the cabinet doors perfectly.
|
|
4) Submitted by
Dan Gwynne, from Greeneville, TN
on 2/5/2011
Customer Rating:
Have used these hinges on cabinets in the past. Rockler will always be 1st when I order. Great price.
|
|
5) Submitted by
Bruce, from Nevada City, CA
on 2/5/2011
Customer Rating:
Very good - have used before. Easy installation. Adjustment feature is good. Using a Vicks bit makes installation much easier.
|
|
6) Submitted by
John, from North Ridgeville, OH
on 1/22/2011
Customer Rating:
Very good quality, easy to install.
|
|
7) Submitted by
Charles Dodd, from Wamego, KS
on 1/15/2011
Customer Rating:
Operate great and easy to install. These are my favorite.
|
|
8) Submitted by
JS
on 12/23/2010
Customer Rating:
I replaced cabinet hinges with these and they fit perfect and the adjustments these hinges allow let you tune the door for perfect closure and alignment.
|
|
9) Submitted by
John, from Sulphur Springs, TX
on 12/21/2010
Customer Rating:
This was the first time I have used hidden hinges. I would have liked a wider ranage on the adjustments like I have on my kitched cabinets but for the price these worked well. I will use them again.
|
|
10) Submitted by
Glen, from Pierre, SD
on 12/17/2010
Customer Rating:
I have ordered many of these hinges and they are easy to install and adjust.
|
|
11) Submitted by
John S Lipkin, from Mt Airy, GA
on 11/19/2010
Customer Rating:
Great for the price, very easy to install and adjust. The ones I will use every time.
|
|
12) Submitted by
Will Harrington, from Wichita, KS
on 8/30/2010
Customer Rating:
I use these hinges every time I build a cabinet. I love the 3 way adjustment and how easy they are to install.
|
|
13) Submitted by
Jason from NJ
on 6/30/2010
Customer Rating:
My first time making cabinet doors was made easy with these hinges. The included template worked perfectly, making hinge installation a breeze.
|
|
14) Submitted by
Roger Conner, from Sanger, CA
on 4/22/2010
Customer Rating:
This was my first time to use hidden hinges. They were very easy to install and mount. I liked the three way adjustment for ease of aligning the doors. I would recommend these hinges for everyone.
|
|
15) Submitted by
Dan Kimber, from Glasgow, VA
on 11/6/2009
Customer Rating:
Used these hinges on the first cabinet doors I have ever made. Even with a little mis alignment they can be adjusted into place. They have a nice open and shut feel.
|
|
16) Submitted by
Aaron de Chazal, from Rochester, MI
on 10/23/2009
Customer Rating:
Having installed eight of these units I think they're very comparable in quality to the gold standard Blum units. I chose these over the Blum units because these have two screws mounting the hinge to the faceframe versus Blum's single screw.
|
|
17) Submitted by
Oliver, from El Dorado Hills, CA
on 10/3/2009
Customer Rating:
I used both the Salice hinge and the entry level Blum hinge. For a garage woodworker, the extra adjustments in the Salice hinge made it easier to correct. The Salice hinge indexes to the front of the face frame (which is nice)the blum indexed to the front and rear (problem because my face frames are evidently thicker than some standard). I am talking about the ears on the hinge.
Although there were no serious problems with the Blum, I intend to keep paying a little extra for the Salice due to its ease of use.
|
|
18) Submitted by
Fred Hopfensperger, from Stevens Point, WI
on 8/4/2009
Customer Rating:
The hinges are easy to install and opperate well. The spring in the hinge for self closing could be a little stronger.
|
|
19) Submitted by
Chris, from Chandlerville, IL
on 12/5/2010
Customer Rating:
Good hinge for the price. I wish I had gotten the hinges that open farther though. Thanks Rockler.
|
|
20) Submitted by
Miro Cater, from Port Orange, FL
on 1/17/2010
Customer Rating: 
Somewhat disappointed by these hinges: while two mounting screws on the frame promised greater rigidity than the old-faithful Blum, I find the hinges rather flimsy. Once installed, a closed door can be pushed in by a good 1/16” by relatively low force. Equally, and open door can be easily 'rocked' around. Two hinges have diffcult time with solid oak 24" wide door...In future, I will switch back to Blum.
|
|
21) Submitted by
Joshua Myers, from Sturgis, MI
on 11/22/2010
Customer Rating:
I think the hinges are well made and easy to install. I would however caution you not to use them with drawer slides that only use a 1/2" gap between the drawer side and face frame. I used them for this type of application and found you can not pull the drawer out once the hinge is screwed in place.
|
|
22) Submitted by
J Yost, from Kremmling, CO
on 5/17/2009
Customer Rating:
perform as advertised and easy to install
|
|
23) Submitted by
Bill Croce, from Fairfield, ME
on 4/30/2009
Customer Rating:
I always have issues with hinges - These are Great - Easy to use and adjust - Highly Recommended.
|
|
24) Submitted by
Corey Niven, from Colfax, WI
on 4/23/2009
Customer Rating:
Very easy to install. Great to have the 3 way adjustments to take the frustration away from having doors side by side. It would be nicer to have them open another 15-20 degrees. Great price too!
|
|
25) Submitted by
Donald, from Hammonds, KY
on 10/1/2009
Customer Rating:
Worked nicely, it is helpful to know that 35mm is 1 3/8". Good service.
|
|
26) Submitted by
Phil Wiggett, from Streator, IL
on 3/10/2009
Customer Rating:
I build cabinet's as a hobby (mostly kitchen cabinets) and I have used many type of hinges. I recently had to make a cabinet for my daughter's home that was to extend from the existing island. I decided to try the Salice hinges, and it was very easy to install and it works very good. I would say it is as good as the Blum hinges that I have often used.
|
|
27) Submitted by
Keith Parker, from St. Louis, MISSOURI
on 3/1/2009
Customer Rating:
I'm building cabinets for our kitchen and I compared this hinge and the Blum counter-part. They are both excellent hinges and the Salice hinge has 3 adjustment axis as opposed to 2 with the Blum hinge. I found the 3rd. axis to be unnecessary unless the hinge was installed incorrectly or that the face frame wasn't true or square. I do give the Blum hinge a slight edge in that the self close mechanism is a bit more positive.
|
|
28) Submitted by
DS, from Sugar Land, TX
on 2/14/2009
Customer Rating:
Am replacing all 122 hinges our builder installed less than 8 years ago because the closure springs were breaking. Was happy to find these - they fit in the existing hinge holes (only had to drill new holes for mounting screws on the frame) and really like that they mount with 2 screws, not 1. Also like the 3-way adjustment on these hinges. I seriously doubt I'll ever need to replace these.
|
|
29) Submitted by
Chris Brophy, from Clarence Center, NY
on 1/17/2009
Customer Rating:
I was looking to oversize some cabnets for our laundry room, and needed 1" overlay, Rockler had them and they work as well as any I have installed in the past.
|
|
30) Submitted by
John Burnell, from Woodstock, VA
on 1/13/2009
Customer Rating:
These hinges were a snap to install. I had a 35mm Forstner bit I used for Blum installations. It worked just as well for the Salice. Furnished instructions were clear. Great product.
|
|
31) Submitted by
Mark A Lauer, from Gibsonburg, OH
on 3/30/2010
Customer Rating: 
Dissapointed in the large gap left between the door and stile even after adjustment. Typical cushion pad will not be enough to make door parallel to cabinet. Would probably not use again.
|
|
32) Submitted by
Gary Lamm, from Monessen, PA
on 3/6/2011
Customer Rating:
The hinges appear to work just fine, however, I take exception with the instructions. This was my first time constructing a corner cabinet w/lazy susan, and although I consulted many books, I didn't come across one that showed the proper door layout.
If the instructions would have shown a plan view of how the doors look when assembled with the hinges along with comments about clearance allowances, it would have been very helpful. As it turned out, after assembly, I had to make another door panel because one of my doors was 1" too wide and I had already drilled all of the cup holes for the hinges. Thankfully my doors are only slab doors, so it didnt' take too long to make a replacement. Other than that, I would buy these hinges again, but I feel that better instructions may have saved my having to re-do a part of my work.
|
|
33) Submitted by
Dwayne, from Medina, OH
on 10/2/2011
Customer Rating:
I have ordered other hinges from Rockler and they all have been fantatstic. Only wish I knew exactly how to determine the right overlay the first time...
|
|
34) Submitted by
Jesse Wright, from Anna, IL
on 12/15/2008
Customer Rating:
My son and I do carpenter work along with creative woodworking we are building a bar for a business. We usually use Blum hinges, tried these instead and am satisfied to the point I will use them again. We used the same Rockler hinge boring jig that we use for the Blum, it worked fine for these.
|
Home  Hardware Hinges Face Frame Hinges Face Frame Overlay Hinges Salice® Excen-Three Self-Closing Face Frame Hinges 
|
(0 Items)
