Customer Reviews and Photos for:
Universal T-Track
|
Average Rating:
4.8
(18 customer reviews)
Add your review...
|
|
|
1) Submitted by
Danny H., from Santee, CA
on 10/3/2012
Customer Rating: 
I like that Rockler redesigned this t-track so it's thinner and has predrilled holes. I've used quite a bit of these and when they are on sale I can't find a better price.
|
|
2) Submitted by
Mike T from NY
on 4/28/2012
Customer Rating:
I revamped my Radial Arm Saw using the T-Tracks so that I can use the T-Track Accessories with my RAS. Works great, adds versatility to the saw and another measure of safety. What a difference.
|
|
3) Submitted by
Cory Jones, from Decatur, IL
on 5/6/2011
Customer Rating:
I built a precision miter saw station using the t track and really liked it. I am looking for new project to use it in a clamp down table and table saw fence are in the works.
|
|
4) Submitted by
Clinton T, from Troy, ILLINOIS
on 4/2/2011
Customer Rating:
I used this t-track for accessories to hold fishing gear, fish finder, hooks, GPS, Fish Basked off the side of my 16' kayak. Works great, is very strong and has met all the demands I wanted to use this for.
|
|
5) Submitted by
Victor Ortiz, from San Juan, PUERTO RICO
on 3/27/2011
Customer Rating: 
I have not used the product yet, but it looks ok to me.
|
|
6) Submitted by
Dan Roper, from Caldwell, TEXAS
on 3/14/2011
Customer Rating:
I used two of these tracks in building a squaring jig for assembling doors, drawers, etc. Excellent product. There will be more of these in my future as I come up with more jigs and or fences to build.
|
|
7) Submitted by
Jerry Brasier, from Cedar Hills , UT
on 3/5/2011
Customer Rating:
Love it. Built a router table fence with both a short and tall side, and mounted a T-Track full width in both faces for mounting accessories. Great product.
|
|
8) Submitted by
Joe Stephens, from Ingelside, IL
on 12/31/2010
Customer Rating:
Make's an excellent recessed saw fence with rule and slide stop, by not using a stand-up fence the counter top can be used for other jobs,I like how easy it is to make mulitiple cuts that are dead on.
|
|
9) Submitted by
David, from Crumley, NE
on 12/18/2010
Customer Rating:
Totally impressed with the T track. I ordered numerous pieces to install on my workbench. The versatility is great. Product more than met my expectations. Being able to use any number of home built jigs and clamping accessories has really improved my work, and the speed at which I can complete projects. My only wish is that Rockler would make a corresponding T bar that a person could attach to jigs for sliding operations such as panel cutting, and layout work. Specifically a circular saw trolley would be great. It would really expand the functionality of this product.
|
|
10) Submitted by
Bill, from Roy , WA
on 12/4/2010
Customer Rating:
Bought several Jig & Fixture components and the quality and response time were excellent.
|
|
11) Submitted by
Will, from Atlanta, GA
on 11/21/2010
Customer Rating:
Works well with many bolts I had laying around the shop and makes it easy to setup router tables and other fixtures in 3/4" stock. Great clamping force too.
|
|
12) Submitted by
Mark Hudgens, from Atlanta, GA
on 9/26/2010
Customer Rating:
Rockler redesigned these T tracks a couple years ago. They changed the thickness from 1/2" to 3/8". This allows installation in 3/4" plywood without weakening it so much. Great idea!
I really like this stuff. It has found a place in various jigs in my shop. The price went up significantly with the redesign, but I think the product is good enough to justify the additional expense.
|
|
13) Submitted by
Dana Watson, from San Antonio, TX
on 4/18/2010
Customer Rating:
Used the 48" T-Track to make a hold-down work area on a work stand. Very pleased with the product. This arrangement is very helpful for me to quickly hold work pieces for routing, biscuit joint cutting, or clamping. The T-Track along with the hold-downs is very secure and versatile.
|
|
14) Submitted by
Tony Leon, from Johnstown, CO
on 9/12/2011
Customer Rating:
Well made with no defects. One negative was no mounting screws were included.
|
|
15) Submitted by
Nora Little, from Canisteo, NY
on 1/24/2011
Customer Rating:
I`ve ordered items periodically over the years and always found the products, online assistants, and timely service to be second to no one from Rockler. This time a purchased stick-on measuring tape, [2] 48" T-Tracks, and a couple other items. My online shopping experience went well. Products were first rate. I received my latest issue of "Shopnotes" and decided to build the "Router Milling Jig". The "Cookies" were super and will order more. In fact I found lots more nifty toys in the included catalog. Each month after the bills are paid out, I`ll make out an order.I found one item in the dust collection section that was only pennies from half the price of Rockler`s competitor. Will I load up on them.........Hmmmmmmmmmm.
|
|
16) Submitted by
Harry Hoover, from Colorado Springs, CO
on 4/27/2012
Customer Rating:
Track is great but finding 6 x 3/8" FH screws not included for mounting in 3/4" material next to impossible.
|
|
17) Submitted by
David Rice, from Shoreline, WA
on 10/16/2012
Customer Rating:
This is a great product for hold downs and jigs.
|
|
18) Submitted by
Joel R. Anderson, from Anchorage, ALASKA
on 3/12/2010
Customer Rating:
Its depth is 1/2" rather than the standard 3/4", allowing it to be used in shallower panel material or the same material without degrading the panel's strength. I immediately ordered more.
|
Hand Tools and Shop Accessories 
(0 Items)
