Customer Reviews and Photos for:
Plate or Socket Mount Ball Casters
|
Average Rating:
4.3
(21 customer reviews)
Add your review...
|
|
|
1) Submitted by
Bernice Kline, from Montrose, CO
on 7/22/2011
Customer Rating: 
I used these ball casters to replace the old ones on a Thomasville server that is quite old, it was given to me by a friend and the old rollers made marks on my nice wood floor, therefore we have a nice replacement and can now feel comfortable in roller the server where ever we find it useful. Thank you.
|
|
2) Submitted by
Wally, from Huntingburg, IN
on 7/22/2011
Customer Rating: 
These casters were perfect, and a fast way to fix my captain chair. Great price, fast shipper! Casters were better then then the old. Thanks again.
|
|
3) Submitted by
Greg, from Owatonna, MN
on 7/14/2009
Customer Rating:
Used on my new Granddaughters crib. One that my wife and I refinished after our three children, and two of my brothers kids used. Worked fantastic and look even better than the originals.
|
|
4) Submitted by
Stan, from Plankinton, SD
on 3/11/2009
Customer Rating:
I have ordered several sets of these casters for antique tables and they work and look great! The stem mounts always fit into the original inserts just great.
Excellent product, I will use more.
|
|
5) Submitted by
PR from GA
on 1/19/2009
Customer Rating:
Used these casters on a wooden utility cart which is full of heavy materials. The casters that came on the rather expensive cart could not deal with the load. These have worked out just great and the load is no problem. Oh, did I mention they look great. Very pleased with these casters.
|
|
6) Submitted by
Craig Nelson, from Fort Worth, TX
on 9/5/2008
Customer Rating:
Overall, excellent quality and appearance, better than what we replaced and just what we wanted. One wart. One of them was too tight to swivel freely, rendering it useless and since it's riveted, we couldn't correct the problem. We bought more than we needed so it didn't delay the job. Other than that, great product!
|
|
7) Submitted by
Robert, from Baltimore, MD
on 9/2/2008
Customer Rating:
I recently bought 5 sets to allow platforms build for my computers and UPS' to be mobile. They have worked exactly as expected, and look great as well! Also, can't beat the price.
|
|
8) Submitted by
Donna, from Biddeford, ME
on 7/27/2008
Customer Rating:
Bought them for my mother in law to put under her portable oxygen holder that was made for her so she does not have to carry it around but just roll. The rubber is much smoother than the big plastic ones that she had.
|
|
9) Submitted by
Tim O, from Oklahoma City, OK
on 5/29/2008
Customer Rating:
Just what I needed to complete the oak spindle crib I'm making for my 1st grandchild due in August.
|
|
10) Submitted by
Robert, from Baltimore, MD
on 5/9/2008
Customer Rating:
Used this product as part of a roller platform for a computer. Worked very well and rolled without leaving marks on the floor. They work well and still have an "office" look. I would buy again.
|
|
11) Submitted by
Andrea B., from Fallston, MD
on 4/14/2008
Customer Rating:
Used these for an oak dining table on laminate flooring. They're good and sturdy. Very quiet rolling.
|
|
12) Submitted by
Gail A, from Wellesley, MA
on 3/8/2008
Customer Rating:
Love them...match my chairs perfectly.
|
|
13) Submitted by
Stanlee Johnson, from Plankinton, SD
on 2/21/2008
Customer Rating:
Loved these casters! They were purchased for a round oak table to be used on a wood flooring and they work great!
|
|
14) Submitted by
Joseph McVey, from Barndon, FL
on 12/19/2010
Customer Rating: 
Put dents in our wood floor. We have Mannington Oak Floors and these casters put dents in the floor. We put them on one chair and tried them while sitting in the chair and on the first try they put dents in the floor. We are not over weight. They seem to have a crease in the middle of the caster that is causing the denting. I don't recommend these at all if you have Mannington or similar type floors.
|
|
15) Submitted by
Samuel B., from Brooklyn, NY
on 1/23/2008
Customer Rating:
Although the body is slightly larger than [my] original metal ones, the wheels fit well & look good. Thanks for offering this product.
|
|
16) Submitted by
Don Kessler, from Clarkston, MI
on 11/18/2007
Customer Rating:
Used these casters before. They work great, and my customers love them.
|
|
17) Submitted by
Dave, from Cherry Hill, NJ
on 10/8/2007
Customer Rating: 
Good product and service.
|
|
18) Submitted by
John Tosto, from Elbert, COLORADO
on 10/3/2007
Customer Rating:
The casters are very good.
|
|
19) Submitted by
Bob, from Kinde, MI
on 11/1/2008
Customer Rating:
I purchased the plate casters, to be installed on a entertainment center that I built. The entertainment center is 60" tall x 16" deep x 48" wide. Unit is located in the living room, with oak hardwood floors. By installing the casters, unit is very easy to move. I'm very pleased with this product. Great price, worth the money.
|
|
20) Submitted by
Kent, from Va Beach, VA
on 7/25/2011
Customer Rating: 
Used on kitchen chairs. Needed to replace the wheels on our chairs to protect our recently refinished wooden floors. They installed fine and they look good, but they haven't withstood the test of time. After only a few months, several are not rolling well, so they're starting to scratch the floor as they drag vs roll. The heaviest person to sit on these chairs is 150 lbs so they should be able to handle that since they are rated at 300 lbs per set.
|
|
21) Submitted by
John, from Navarre, FL
on 11/26/2007
Customer Rating:
Solid product - medium hard rubber ball roller. Minor trimming of mold flashing on the ball was necessary.
|
Hardware 
(0 Items)
