Home Hand Tools and Shop Accessories Drilling Drills and Accessories Power Drive Threaded Insert Tool


Power Drive Threaded Insert Tool

Power Drive Threaded Insert Tool

$10.99Each   Scoll Down to Order

Average Rating: Customer Review Rating: 3.2  (9 customer reviews)




See More Images
Rockler Advantage


For driving threaded inserts with slotted heads accurately and quickly, choose the Power Drive Threaded Insert Tool. Available in a variety of sizes. Works with most variable speed drills.

  • Overview
  • More Info
  • Reviews
Bookmark and Share  
Choose the right tool for your job! For driving threaded inserts with slotted heads accurately and quickly, choose the Power Drive Threaded Insert Tool. Works with most variable speed drills.
Bookmark and Share  
Technical Details:
  • All Steel Construction
  • Recommended for inserts with screwdriver slot at the top
  • Made in USA
What's in the Box?
(1) Power Driver Threaded Insert Tool
 
Bookmark and Share  

Customer Reviews and Photos for:
Power Drive Threaded Insert Tool

Average Rating:
Customer Review Rating: 3.2
3.2
(9 customer reviews)
$10.99

Add your review...
1) Submitted by Harold Gall, from Worthington, OH on 8/4/2010
Customer Rating: Customer Review Rating: 5.0
I rebuilt an old park bench which was comprised of a mahagony seat and backrest with cast iron ends. Most ends of the wooden seat and backrest slats were rotten so I trimmed them off, replaced (4)slats and counter-bored to accept the threaded inserts. The tool worked fine for about 75% of the holes when the tangs broke off; so I ordered a replacement to finish the job. Installation of the inserts without the tool is almost impossible, especially with the number of holes I had to contend with. I would not recommend installation without this tool.
2) Submitted by Ron Wieck, from Sioux City, IA on 7/28/2009
Customer Rating: Customer Review Rating: 5.0
The product worked as indicated. I used the driver in the drill press and hand turned the inserts into oak on adjustable legs I was making for a table saw out feed table.
3) Submitted by Jerry Pardy, from Bowling Green , FL on 1/21/2009
Customer Rating: Customer Review Rating: 4.0
The tool worked well, it installed the insert without tearing the ears off the nut.
4) Submitted by John, from Lexington, SC on 12/11/2008
Customer Rating: Customer Review Rating: 4.0
The purpose of the tool worked very well. It did do some tear out once it hit the wood. I used a cordless impact driver to install and it ripped apart the nubs on the nuts, maybe because they were brass and I was installing them in white oak. Overall it did what it was supposed to do.
5) Submitted by Arvid Podsim, from Spring, TX on 8/15/2010
Customer Rating: Customer Review Rating: 2.0
The driver was used to drive 1/2-20 steel inserts into
1/2" Baltic Birch. The ears broke after driving 11 threaded inserts and in my oponion should have lasted longer. Use this driver with a drill with adjustable cluch on VERY LOW SETTING to prevent breaking the ears off.
6) Submitted by T. Smith, from San Jose, CA on 8/9/2010
Customer Rating: Customer Review Rating: 2.0
Great idea, but don't use it to drive all the way into hard wood (e.g. maple). It will break the tabs on the tool and strip the insert. Instead, use the tool to get it started (i.e. square), and then finish with a very large screwdriver (or two nuts on a bolt that you screw in with a ratchet).
7) Submitted by Bob, from Giammar, OH on 3/23/2009
Customer Rating: Customer Review Rating: 1.0
Broke on driving into wood after one insert.
8) Submitted by Leon R Johnson, from Erie, PA on 3/19/2010
Customer Rating: Customer Review Rating: 5.0
I used the 5/16" in my drill press for driving a 3/8"insert and turned the drill chuck using a 6"long 1/4"bolt. I had no problems in pine but did find it tough to turn in maple but still successful. Before I received the insert tool I twice tried driving this insert and broke the nubs on the inserts using a wide bladed screw driver before I got it all the way in. This insert tool is the solution.
9) Submitted by Mark, from Los Angeles, CA on 4/4/2008
Customer Rating: Customer Review Rating: 1.0
Hard to control and damaged the wood. Also overheated drill.
 
Order this Item
Power Drive Threaded Insert Tool:
Quantity Item Number Item Stock Status Price
30174 1/4'' - 20 tpi Power Drive Threaded Insert Tool
Oversold
until Jun 4, 2013
Reserve
Yours Today 		$10.99 Each
30181 5/16'' - 18 tpi Power Drive Threaded Insert Tool
In
Stock 		$10.99 Each
46002 3/8'' - 16 tpi Power Drive Threaded Insert Tool
In
Stock 		$10.99 Each
49336 #8 - 32 tpi Power Drive Threaded Insert Tool
In
Stock 		$10.99 Each



Home Hand Tools and Shop Accessories Drilling Drills and Accessories Power Drive Threaded Insert Tool
Locate Your Nearest Rockler Store

"Rockler is my only source for fine tools and woodworking supplies. Every item I have purchased from them has been better than I anyone would expect from other suppliers. Thanks to them I have begun the wonderful and rewarding journey into turning, from my lathe to all my turning tools and gadgets, I am a fan. Rockler has enhanced my knowledge and expanded my enthusiasm. They are customer oriented. "
- joe cap - 03/08/2013
See more...
Copyright © 2013, Rockler Companies, Inc. This is a Secure Shopping Site
web2