- Overview
- More Info
- Reviews
- Videos
Make all your tools last for generations with this tool care kit. Choose from 2 kits or T-9 lubricant sold separately.
|
One bottle removes resign gum and pitch from blades and bits; another removes rust and stains from any surface; and the third bottle prevents rust while it lubricates. Choose from 2 kits or T-9 lubricant sold separately. Boeshield 3 Pack Kit Includes - One 8.45 ounce pump bottle of Rust Free- Rust and stain remover
- One 8.45 ounce pump bottle of Blade & Bit- resign, gum and pitch remover
- one 12 ounce aerosol can of T-9- Rust and Corrosion protection/Waterproof Lubrication.
Boeshield Mini 3 Pack Kit Includes - One 4 ounce pump bottle of Rust Free- Rust and stain remover
- One 4 ounce pump bottle of Blade & Bit- resign, gum and pitch remover
- one 4 ounce aerosol can of T-9- Rust and Corrosion protection/Waterproof Lubrication.
|
| |
Customer Reviews and Photos for:
Boeshield 3-Part Tool Care Kits and Lubricant
|
Average Rating:
4.9
(9 customer reviews)
Add your review...
|
|
|
1) Submitted by
David, from Dallas, TX
on 4/5/2011
Customer Rating:
Recently purchased a used Ridgid TS3650 that had a reasonable amount of rust on the cast iron top. Used the Rust Free per instructions - including a well ventilated area - let it sit for 30-60 seconds and wiped the rust off with a soft rag. On some of the tougher spots I used the Rust Free and some steel wool, but this stuff is amazing!
|
|
2) Submitted by
Maury, from Franklin, NC
on 12/3/2010
Customer Rating:
Recommended by a friend. Product works great and cleans up those old blades!
|
|
3) Submitted by
Al Foote, from Westlake, OH
on 6/16/2010
Customer Rating:
I recently bought a used 8-year-old JET cabinet saw that I found on Craig's list. The cast iron surfaces of the saw were in fabulous shape - like new. When I commented about them to the previous owner he immediately turned around and produced his can of T9 and explained how he used it to maintain the surfaces through the years. Needless to say, I bought my own can and have continued the regimen to this day.
|
|
4) Submitted by
Carl, from Goldsboro, NC
on 8/20/2009
Customer Rating:
I bought this on a recommendation and it works great! I will not be without this in my shop again.
|
|
5) Submitted by
James Morgan, from Ermine, KY
on 4/28/2009
Customer Rating:
Boeshield T9 is the best rust preventive product I have EVER used!
|
|
6) Submitted by
Dennis Niemczyk, from Chicago, IL
on 11/22/2008
Customer Rating:
A great trio for the shop. The blade and bit cleaner works well without a lot of scrubbing and the rust remover cleaned up an old framing square fairly quickly. But the real performer of the kit is the T9 Boeshield. I use it on all my tools with cast iron tables as well other tools that have an affinity for rust. It dries quickly, lasts a long time and doesn't leave an oily residue. Best of all just a thin coat does the job. It is one great product to help take care of your tools without a lot of effort.
|
|
7) Submitted by
Scott Artley, from Naylor, GA
on 10/4/2008
Customer Rating:
Saw this product in woodworking magazine with good reviews and decided to try it. Great product for lubrication and cleaning machined tables. Protectant is excellent for covering tables and provides smooth surface to slide wood on. Used on old tablesaw top and cleaned it up like new. Since then, make sure I always use the cleaner and protectant with new equipment tops to save the fresh machined surface.
|
|
8) Submitted by
Don Miller, from Rhinelander, WI
on 8/31/2010
Customer Rating: 
This is the second can of Boeshield T9 I have used. I bought a 12 oz. can about a year ago and it lost its pressure while it was still nearly full. So I am glad Rockler sells a 4 oz can now! T9 is an excellent product otherwise. I'd much rather have any product in a spray bottle than an aerosol can.
|
|
9) Submitted by
Jim Crockett, from Jay, ME
on 10/19/2007
Customer Rating:
Read about this product on a woodworking forum where it was recommended to clean and lubricate the gearing on table saws as well as a good product to spray on your table top to help eliminate rust and leave a smooth, low friction surface.
Cleaned the vertical and angle gear movements on my tablesaw. Found that it works well with a toothbrush to clean the accumulated grit and grime and leaves a very slippery, dry coating that should help prevent buildup. Have also used on my squeaking car doors, on the pivot assemblies of my miter saw, the axle of my drop spreader and for several other applications.
This lubricant/cleaner is excellent! I have already decided to purchase a replacement can, this time in 12 oz. instead of 4 oz. It leaves a dry, invisible coating that inhibits rust formation and really does provide a nice, low-friction surface - great for gears, pivots, axles, and other moving parts.
|
Home  Shop Essentials Tool Tune-Up and Maintenance Boeshield 3-Part Tool Care Kits and Lubricant 
|
(0 Items)
