Customer Reviews and Photos for:
Spiral Dowel Pins
|
Average Rating:
3.5
(11 customer reviews)
Add your review...
|
|
|
1) Submitted by
Joe Houle, from Aubrey, TX
on 12/12/2010
Customer Rating: 
Excellent overall product. I've been using them for my joining needs for Christmas projects, and would recommend them highly!!!
|
|
2) Submitted by
Gregg Gibson, from Lewis Center, OH
on 7/31/2009
Customer Rating:
What is there to say about dowels? They worked as designed. Thanks
|
|
3) Submitted by
Ed Creamer, from Elkton, MD
on 6/15/2009
Customer Rating:
Used to assemble a reloading bench. Worked great. The diameter was just right for assembly without modification.
|
|
4) Submitted by
Brent Arndt, from Park River, ND
on 5/11/2009
Customer Rating:
Easy to use and holds extremely well.
|
|
5) Submitted by
Melvin Gibson, from Maryville, TN
on 12/7/2007
Customer Rating: 
Very good and fast shipping
|
|
6) Submitted by
Louis C., from Falmouth, ME
on 4/10/2010
Customer Rating: 
The 1/2" spiral dowel pins are almost impossible to use. Out of an entire bag not a single one has fit without modification. Exchanged the bag and all 50 still don't fit.Using a Dowel-it clamp and 1/2" brad-point bit the dowels stick, bind and cause problems. Sanding each carefully with 150 grit sandpaper fixes the problem.
10 out of the 100 failed to work without sanding.
|
|
7) Submitted by
Mark Beiley, from Sarasota, FL
on 11/21/2007
Customer Rating:
Repaired some old oak dinning chairs. Worked great. The chairs came out very well.
|
|
8) Submitted by
Jim Galford, from Missouri City, TX
on 4/24/2011
Customer Rating:
I purchased two bags 100 of 3/8" variety. Approximately 40% of the pins fit holes drilled with a new brad-point bit. Both bags had been stored in a cool, dry, low-humidity environment for several days before use, so I must conclude the quality control on the diameter is poor. Next time, I'll consider other options.
|
|
9) Submitted by
Marcus, from Savage, MN
on 1/23/2013
Customer Rating: 
Bought a couple bags of the 3/8" and they were oversized. I tried a couple different bits thinking it may have been that, but no luck.
|
|
10) Submitted by
Alex, from Santa Barbara, CA
on 2/11/2013
Customer Rating:
Poor quality control, I had problems with the 3/8" pins, a huge percentage of these pins are over sized by 1/32 - 1/16". The sad part is if a dowel is going to be over or under, better it be under by a bit because it can still glue up.
|
|
11) Submitted by
Michael Prettenhofer, from Indian Springs, NV
on 11/1/2007
Customer Rating:
These dowels were used to make a set of dining chairs, worked great.
|
Wood Products 
(0 Items)