Customer Reviews and Photos for:
Pivot Hinges
|
Average Rating:
4.4
(20 customer reviews)
$12.99
Add your review...
|
|
|
1) Submitted by
Matthew Barron, from Chico, CA
on 6/7/2011
Customer Rating: 
I used a pair of these hinges on a cradle I made for my first child. It is the one featured in Jeff Miller's book titled Children's Furniture Projects. The cradle was awesome however the hinge mechanism used in the plan was only adequate. It used to creak and squeak until I used these pivot hinges. Last thing you want to hear when you are trying to quiet a sleeping baby is a creaky pivot hinge. These hinges worked awesome and it took little thought to adapt them to my project. The first two kids had to endure creaks but my last child slept in peace and quiet. happy customer.
|
|
2) Submitted by
John Cahalen, from Dumfries, VA
on 5/13/2011
Customer Rating:
I've bought two sets and am working on the second glider bench right now. Great product!
|
|
3) Submitted by
Paul Bernier, from Ansonia, CT
on 7/17/2010
Customer Rating:
Used the pivot hinges to restore an old glider chair. It was a snap with some minor modifications to the chair framing. Excellent product.
|
|
4) Submitted by
Jim McCleary, from Warsaw, IN
on 2/4/2012
Customer Rating:
I purchased these Pivot Hinges for the Porch Glider that I built. They work extremely well. You have an Excellent Products! Thanks, Jim Editor of provenwoodworking.com
|
|
5) Submitted by
Richard Pettit, from Rexburg, ID
on 1/15/2010
Customer Rating:
I made this glider bench. The set of pivot hinges work very well.
|
|
6) Submitted by
Carl Stigers, from Pittsburgh, PA
on 11/25/2009
Customer Rating:
I use these hinges for a folding bench I make. They have proven to be a fine application. The only change I made was to use stainless steel locknuts to allow me to tension them correctly and not have the nut come loose.
|
|
7) Submitted by
Dustan Lane, from Greenville, SC
on 3/9/2009
Customer Rating:
Quick shipping, and well thought out design.
|
|
8) Submitted by
Douglas Ogden, from Picayune, MS.
on 12/30/2008
Customer Rating: 
I have not used them yet but looks like they will work well your service is very very good
|
|
9) Submitted by
John Goniea, from Hartland, MI
on 11/26/2008
Customer Rating:
Cradle was made for my grandchildren. The front comes off and makes into a loveseat rocker. The set of pivot hinges work very well.
|
|
10) Submitted by
Bob Brown, from Seguin, TX
on 10/16/2008
Customer Rating:
Used these hinges on an oak pendulum cradle and they were perfect. No problem with installation or operation.
|
|
11) Submitted by
Dave Doherty, from Charlotte, NC
on 8/22/2008
Customer Rating:
I used these hinges on a porch glider after having tried other options and they are by far the best way to go. Easy install and a smooth glide.
|
|
12) Submitted by
Stephen Miracle, from Mineral Wells, WV
on 7/24/2008
Customer Rating:
I used these on a porch glider. They are very good hinges, and are priced very decent. I put a drop of super glue on the threads to keep the nut from backing off. Other than that they are great.
|
|
13) Submitted by
wes fausch, from johnston, IOWA
on 5/19/2008
Customer Rating:
I have used them on two rocker gliders. Good product but like others, had to apply lock tight to secure the nut.
|
|
14) Submitted by
Lester, from Tuscaloosa, AL
on 1/1/2008
Customer Rating:
Excellent set of pivots for my swinging continental cradle.
|
|
15) Submitted by
K, from Fredericktown, OH
on 8/26/2008
Customer Rating: 
The hinges are working out well so far for my porch glider. The only problem I had at the beginning was that the factory screws were too short and pulled right out under pressure.
|
|
16) Submitted by
Karen Hicks, from Sandston, VA
on 11/30/2007
Customer Rating:
This is a great product that I used to make a porch glider. Easy to use. Had to secure the nut, which worked loose, with epoxy. I will use this product again for similar projects.
|
|
17) Submitted by
Angela Bunt, from Talladega, AL
on 11/20/2007
Customer Rating:
This was used to repair a glider rocker that was purchased at a thrift store. We did encounter the nut working itself loose and my husband used epoxy and that seemed to fix it. I now have a glider rocker that I paid $25 total for !!
|
|
18) Submitted by
Gerald Barnett, from Pineville, LA
on 5/14/2011
Customer Rating:
Pivot hinges work well. I used #6-1" wood screws instead of one included with teh hinges and used locktite on the nuts.
|
|
19) Submitted by
Randy
on 7/1/2012
Customer Rating: 
I read the reviews and all are good. I can't understand that these are very cheap. With plastic bushings that wear very fast, They cannot handle any weight at all without wear. Highly disapointed in these.
|
|
20) Submitted by
Jason, from Wenatchee, WA
on 10/29/2007
Customer Rating:
This is a great product if your looking for a inexpensive alternative to making your own hinges with bearings. I used it to make a pendulum cradle for my daughter. The only drawback is the nut works itself loose the more you rock it. I used some locktight and it seems to have solved the problem.
|
Hardware 
(0 Items)
