Customer Reviews and Photos for:
Drill Press Tool Collector
|
Average Rating:
3.9
(13 customer reviews)
$15.49
Add your review...
|
|
|
1) Submitted by
Norman Haltiner, from Dallas, TEXAS
on 5/19/2010
Customer Rating: 
The tool collector was exactly what I needed to add to my new drill press. It rotates out of the way nicely and can be easily removed and reinstalled as necessary.
|
|
2) Submitted by
Allen Hunsucker, from Denton, NC
on 12/2/2009
Customer Rating:
I have had this for a few months, I was very pleased wih it, sure saves time when huting something I need at the drill press.
|
|
3) Submitted by
Les Waguespack, from Bolton, MA
on 6/9/2009
Customer Rating: 
A convenient accessory. The mounting design is clearly intended for a drill stand column greater than 3" in diameter. My Craftsman bench drill press has closer to a 2" diameter and the bracket and strap are oversized. Trimming the strap and adding a block to the side of the column allows a to be cinched down tightly.
|
|
4) Submitted by
Emory Gilbert, from Columbus, GEORGIA
on 6/5/2009
Customer Rating:
I have been wanting one of these all along. The sale price just sealed the deal on this item. Works great with my floor-standing drill press having 4 times the space.
|
|
5) Submitted by
Stephen Heil, from Sammamish, WA
on 5/21/2009
Customer Rating:
This was a great addition to my Jet drill press. When using the press I find I'm always switching between bits and generally have small this around on the drill press table. This tool collector is great for keeping things handy but not always falling off the drill press table into the shavings etc. on the floor.
|
|
6) Submitted by
Jeremy Washington, from Elkton, VA
on 5/25/2009
Customer Rating:
It's a shelf for on your drill press. It cannot be that impressive. Not bad though!!!
|
|
7) Submitted by
David Knapke, from Highlands Ranch, CO
on 5/20/2009
Customer Rating:
With the on sale price, it less expensive than the time it takes to make something similar. It's very functional, that extra horizontal storage space at the right height is quite useful.
|
|
8) Submitted by
David Arrington, from Lewisville, NC
on 7/11/2008
Customer Rating:
If you work in a shop very much you're gonna have to use the drill press once in a while and this product is a must. It saves you time and you can find what you need to operate the press because it's right there in front of you. Thanks for a great product.
|
|
9) Submitted by
Bruce J Brechtl, from Waunakee
on 4/4/2008
Customer Rating:
Great product! Can now find the chuck key all the time.
|
|
10) Submitted by
Skip L., from Colorado Springs, CO
on 2/15/2008
Customer Rating:
Simplicity. Functionality. Great price. This one is a home run.
When installing it, which took all of 1 minute, I was impressed with the fact that the height of the attaching shoe, which clamps to the column, matched the space between the top ring (holding pinion rack) and the head assembly. Perfect fit. My drill press is a 14" Delta.
The tray can be simply lifted off and removed, if needed, without using any tools. Slick. And what a great place for the coffee mug! I think that's the real reason I got it...:)
|
|
11) Submitted by
Larry Sitter, from Hermosa Beach, CA
on 3/25/2007
Very Happy with tool collector.
Keeps you fom losing bit and chucks.
*****
|
|
12) Submitted by
David Westbrook, from Charlotte, NC
on 8/18/2011
Customer Rating: 
Requires clamping a plastic table bracket to your drill press column with a screw clamp like a radiator or dust hose clamp. My drill press is a Delta unit that has a crank to elevate the cast iron table and includes a steel rack for the elevating crank that swivels when the drill press table is rotated around the column. Use of this product locks the elevation rack and precludes swiveling the regular drill press table out of the way for tall work pieces. Used the product anyway as it appeared to be a useful accessory, but after a few weeks, the plastic table bracket holding bracket cracked and the table fell off the drill press column. Good product idea, less that perfect implementation.
|
|
13) Submitted by
Ron Cronwell, from Fairfield Glade, TN
on 3/15/2008
Customer Rating:
The plate arrived in a warped condition. It is ot level and it seems as though the whole form was faulty. I have yet to talk with Rockler, but hope they will replace it.
Editor's note: Yes Ron, a call to out customer service with your order info and they will arrange to replace for you.
|
Power Tools and Shop Accessories 
(0 Items)