- Overview
- More Info
- Reviews
Has the beauty of Genuine Mission Style Furniture. Three tables in one plan!
|
Clean design and sturdy construction of Shaker and Mission styling make these tables a comfortable addition to any décor. This single project plan contains plans for a coffe table, end table and sofa table all featuring a generously sized storage shelf below for magazines, books, or knick-knacks.
The three dimensional assembly drawings include easy to read step-by-step instructions.
Patterns are provided for any difficult or curved pieces. The plan uses
classic Mission Style through mortises and the bottom stretchers are slightly
curved.
Complete
lumber requirements and cutting diagrams are included. No special hardware
is required.
|
| |
Customer Reviews and Photos for:
Mission Style Coffee, End and Sofa Tables Plan
|
Average Rating:
4.4
(12 customer reviews)
$15.79
Add your review...
|
|
|
1) Submitted by
Bob Fowler, from Middletown, NJ
on 12/25/2011
Customer Rating: 
I built the coffee table as a Christmas present for my sister last year, and a pair of end tables for her this year. The plans are very well drawn and easy to follow. At my sister's request, I modified the end tables slightly so that the spindles are the sides rather the front/back. This is one project that will make you appreciate the joys of a hollow chisel mortise machine! Visitors to my shop while these were being built all commented that the construction is so much better than anything they have seen in stores.
|
|
2) Submitted by
Ross, from Lake Zurich, IL
on 12/16/2011
Customer Rating:
This was my first attempt at making any type of furniture. The plans were easy to read and understand, I will make the coffee table later. I did alter two things, one the tenon are all half only and the bottom shelf has the lip all the way around. I did also purchase the heavy duty tenon jig from Rockler and used that for the construction as well. The mortises were all by hand and I can only improve with more attempts.
|
|
3) Submitted by
Don , from Farmington, MN
on 12/16/2011
Customer Rating: 
The plans do not match the picture. Picture shows tapered legs. Easily modified. Plans are easy to read and understand.
|
|
4) Submitted by
George and Christine Easley, from Traverse City, MI
on 11/25/2012
Customer Rating:
We are intermediate level woodworkers and still look at all plans very literally. We have chosen to build 2 end tables and the coffee table out of cherry. The plans are excellent and easy to follow, however, the cover sheet that came with the plans has a huge discrepency from the plans in the length dimension for the coffee table. Our advice would be to check and double check before one does any cutting. We are in the middle of our project and we will review again once we have completed our tables. We have made some modifications in lengths and widths, but all in all excited to get to the finished project.
|
|
5) Submitted by
Doug Gilliland, from Connellsville, PA
on 8/26/2011
Customer Rating:
Very nice plans. My 16-year old son is building a coffee table using these plans and really likes them. Designs include through mortises so that might a problem for some. We bought a dedicated mortising machine for this job. He is doing the top in mosaic tile. The plans are pretty adaptable.
|
|
6) Submitted by
Larry McClenney, from Edenton, NC
on 9/17/2010
Customer Rating:
Plans are fabulous. Dead on on accurate. Three plans in one. Very easy to read. A+. Great service.
|
|
7) Submitted by
John Brown, from Forney, TX
on 5/12/2010
Customer Rating:
I taught high school woodworking and drafting for 35 years. While the plans are not 3 view working drawings, they are extremely easy to follow. All information is readily available, and the directions are concise. The Bill of Materials list is quite accurate, and the cut-plan is very helpful in laying out the materials. I like the "D" size drawing format. It makes everything very easy to read and locate. I can recommend this plan to any woodworker from beginner to advanced.
|
|
8) Submitted by
Todd Hoffman, from Loveland, OH
on 9/17/2008
Customer Rating:
First project of this size. Made a few changes since was making out of cherry. Used plans as guide to make my square coffee table. Fun to make. Going to make end table too.
|
|
9) Submitted by
Rob Becke, from Ft Worth, TX
on 7/8/2008
Customer Rating:
This was my first piece of furniture and I thought the plans were very easy to understand. I made 2 alterations to the plans. First, I didn't make the thru tendons I made them 1/2" like the shorter ones. I also flipped the long side rails so that the tendon was on the inside rather than the outside. I wasn't comfortable that my mortise would be perfect so any defect would show. If you do this the bottom shelf has to be made wider.
I made the coffee table so far and am now working on the end tables. I also plan on making the sofa table. I will definitely buy more plans from Rockler.
|
|
10) Submitted by
David L Dahl, from Washington , IN
on 4/9/2008
Customer Rating:
This was my first attempt at fine woodworking. I found the plans well done and noted, The instructions were also clear. I adapted the plans to install a lift mechanism for a coffee table and was able to modify the drawings quite easily. I made my table out of cherry and am very pleased with the way it went together. I did elect to not make a thru mortise and tendon joint shown on the rails, I went with partial joints. This was because I doubted my ability to make a clean clean joint.
|
|
11) Submitted by
Andy Nagel, from Rochester, NEW YORK
on 12/28/2007
Customer Rating:
I have to disagree with Kevin's opinion of this product. I read his negative review and ordered the plans for these tables anyway. I'm just starting to build furniture after doing my own home repairs for 30 years. I have little experience with high accuracy woodworking, other than knocking together a few bookshelves. These plans are crystal clear, with logical, stepwise directions, and I can't wait to get started!
|
|
12) Submitted by
Kevin, from Cornell, WISCONSIN
on 10/17/2007
Customer Rating: 
The table is nice but the plans are not what I expected. It is two large (approx 24"x36") drawings with hard to read generic instructions. I am only about 8 years into woodworking and usually buy plans to help me learn new techniques. These were little to no use. Sure the dimensions are there but not much else. Also, the format was undesirable.
|
Home  Plans, Books, CD's, DVD's and Videos Woodworking Plans Table and Desk Plans Mission Style Coffee, End and Sofa Tables Plan 
|
(0 Items)
