- Overview
- More Info
- Reviews
- Videos
Drill concealed hinge cup holes with ease and accuracy using the Concealed Hinge JIG IT® System! Use it to easily locate center, and drill cup holes on cabinet doors for fully concealed hinges. Use our Mounting Plate JIG IT® templates (sold separately) to accurately
align holes for hinge mounting plates. Hinge cup bits sold separately.
Technical Details:
- Drills concealed hinge cup holes individually
- Use Concealed Hinge JIG IT® System for mounting cup holes
- Use Long Shank Carbide Hinge Cup Forstner Bits to drill holes for the hinge cup (sold separately)
- The Mounting Plate JIG IT® accurately positions
holes for mounting plates
What's in the Box?
Concealed Hinge JIG IT® System includes:
One Alignment plate
One Bit guide
One Spring
One Stop collar
One Clamp
Drill bits and Mounting Plate JIG IT® Templates are sold separately. |
| Mounting Plate for JIG IT® Templates |
- The Mounting Plate for JIG IT® Template accurately positions
holes for mounting plates, requires Centering Bit (68991, sold separately)
- Choose from (5) different templates.
- Applicable mounting plates are listed with each hinge below.
|
| Additional Hinge Mounting
Products Available: |
|
See our Multi-Tool Rail JIG IT® for drilling
multiple hinge cup holes with a single set up.
 Multi Tool Rail JIG IT® Our newest system lets you
combine two or more original Concealed Hinge JIG IT®'s together for drilling
all the hinge cups on one door with a single set up. It is the right choice for
creating consistency from one door to the next. Now available as a value
priced Master Pack for drilling two cup holes per door! Additional
Concealed hinge JIG IT® Alignment Plates (31091) can be added for doors
requiring three or more hinges. The Master Pack includes a 30'' rail, two
alignment plates, one bit guide, and a stop block for positioning the jig on
a door. Choose the appropriate drill bit. Mounting plate JIG IT® templates
are also available for specific hinges, and can be used on the 30'' rail for
matching the position of the hinge cups on the door.
 35MM Hinge Hole Repair Kit - Kit includes
material to repiar two hinge set. Your choice of Cherry, Maple and Oak. |
|
| |
 |
|
Customer Reviews and Photos for:
Concealed Hinge JIG IT® System
|
Average Rating:
3.7
(25 customer reviews)
$34.99
Add your review...
|
|
|
1) Submitted by
Aaron, from Albuquerque, NM
on 5/1/2013
Customer Rating: 
Bought this for a small project, and it worked so well I have since used it to drill hinge holes on 34 doors with not problems. Door were all solid oak and used carbide bit. It has been so easy.
|
|
2) Submitted by
Bernard, from Edgewater, FL
on 4/16/2011
Customer Rating:
Well, first of all, Rockler shipped out the order within 24 hours. so kudos to them for that.
I was stuck with a project that needed 8 sets of hinges. I hated to buy a drill press right now just for a small project, so I thought this jig would do the job. It did the job perfectly. I did have the doors on a workbench, and clamped the doors down to keep them stable, and used my left hand to push down and make sure the guide laid flat on all sides of the receiving end. BUT, I only have one HUGE suggestion: buy the carbide bit! If you think it is more expensive, it actually SAVES you loads of time. I was boring into oak, and the Rockler carbide bit performed flawlessly. Don't think twice, just buy it.
|
|
3) Submitted by
Bo Turner, from Norman, OK
on 3/8/2011
Customer Rating:
We needed a jig that would allow us to set our hole at 2mm,and this jig did just that. The customer support was excellent and we have no problem recommending Rockler to anyone.
|
|
4) Submitted by
Jeff Wilson, from Modesto, CA
on 8/16/2010
Customer Rating:
This jig makes drilling cup holes easy. I would recommend getting the multi rail jig. It will make life easier. The only I don't like about this is the location of the center marks. However it is easy to transfer the center mark to the wood block on jig.
|
|
5) Submitted by
Riy, from Phx, AZ
on 7/5/2010
Customer Rating: 
Jig worked better than expected - set up with ease - Wish I had purchased the carbide bit. Drilled 12 oak doors and had to stop and sharpen c.s. bit
|
|
6) Submitted by
Jack Wilson, from Bellingham, WA
on 11/17/2009
Customer Rating:
Worked great for my neads.
|
|
7) Submitted by
David Wray, from Wilmington, NC
on 2/25/2009
Customer Rating:
Purchased hinge JIG IT template for re-drilling holes for concealed hinges that cabinetry contractor's personnel had incorrectly drilled for custom-made cabinet doors. Wanted to use drill ass'y from Rockler's Shelving JIG IT to install new 5mm holes need for hinge screws. Holes in hinge template for drill guide were not correct size, so redrilled for 3/8" dia. Template then worked perfectly for redrilling hinge screw holes in cabinet frames for six(6)cabinet doors, all lined up in a row. If you have to install holes for "shelf pins" for a shelving project, the Shelving JIG IT drill guide and plexi-template are a great tool that yeild excellent results.
|
See all
25 reviews...
|
Home  Hand Tools and Shop Accessories Jigs, JIG IT's and T-Tracks Jigs and Rockler JIG ITs Concealed Hinge JIG IT® System 
|
(0 Items)
