Rockler Band Saw Table and Fence

We've partnered with Bandsaw expert and author '' Mark Duginske'' on our newest, exclusive Bandsaw Accessory Table.

Now, you'll get even more from your bandsaw! From oversized, awkward pieces to cutting circles, this table which is an industry first makes your band saw operations a breeze.



Our Duginske-designed circle-cutting attachment is standard equipment with our table and fence system. It allows you to create perfect circles up to 26'' in diameter. And the standard 3/4'' x 3/8'' miter gauge track, which fits most miter gauges.


The generous size of this table, combined with a smooth, friction-free surface, lets you bandsaw even the largest pieces with ease. The T-style fence, which requires no tools for adjustment, also significantly reduces blade drift. Last but not least, you'll want to try the optional resaw attachment-another accessory designed just for use by Mark Duginske. You'll get a professional setup that will vastly increase your bandsaw project repertoire! Although it was designed for use with Rockler's bandsaw table, it also works with most factory fences when attached with two hold-down clamps.

Features Include: Extra-Large 24'' x 24'' Surface Sturdy 1-1/8'' MDF with Smooth Melamine Surface Adjustable 25-1/4'' Fence Aluminum Miter Gauge Track Quick-Detach For Easy Blade Changes Circle Cutting Attachment (included for free) Optional Resaw Attachment Table requires 10.5 inches between blade and upright (throat) of saw Patented And check out this bandsaw books by Mark Duginske, a great addition to your bandsaw library! Band Saw Handbook

Related Articles:

Band Saw Table FAQ

Customer Reviews and Photos for:
Rockler Band Saw Table and Fence

Average Rating:

(3.0)
(18 customer reviews)
Add your review...

1) Submitted by Bob Molloy, from Delran, NJ on 4/22/2009

Customer Rating:

Exceptionally well designed and executed. Installed it on my Delta (28-280) 14" Band Saw without a hitch.

2) Submitted by Bill Lydie, from Lewiston, IDAHO on 2/11/2009

Customer Rating:

Installed Rockler table and fence to a Craftsman 15" bandsaw and works great. The circle attachment is not to straight forward and seems to not cut to accurate a circles but this is minor flaw. I purchased the resaw guide when I purchased but the fence is adequate enough for most resaw work in the shop so I would rethink this item. When you adjust the fence and pull off the table don't do like I did and drop the fence...the adjustment knob broke on the first fall. I had had some issues with the knob working so just purchased a couple more from Rockler which I would recommend for all to do...only $5.00 item.

Thanx again Rockler...

3) Submitted by Conrad Zahn, from Burrillville, RI on 10/7/2008

Customer Rating:

I have a old Delta Rockwell 14 inch bandsaw. The Rockler table and fence was easy to install and gave me greater capability.

4) Submitted by Dave Campbell, from Hazlet, NJ on 2/16/2008

Customer Rating:

I have always been handicapped by my lack of a fence on my bandsaw, with this table I now have a new machine.

5) Submitted by Thomas A. Hancock, from Nevada City, CA on 1/30/2008

Customer Rating:

I like the table size and ease of attachment. The fence attachment and alignment could be of a better quality. It takes some adusting to ensure it is square with the table and blade. The inserts set below the table surface and I have had to place shims on the bottom to keep them flush and to prevent the work piece from hanging up. Overall it is a better system than I had previously had.

6) Submitted by Jim Kovach, from Anderson, IN on 1/24/2008

Customer Rating:

I have a Delta 14" 208-276 Band Saw and have a similar problem as many others...the metal track is too short. The bolts and knobs will not fit into the 2 holes. All it took was to grind out a narrow 1/4" wide x 1/4" deep vertical slot in the table next to where the out-feed bolt is located. This is enough to allow the out-feed bolt to fit into the track hole. With so many people with different band saws having the same problem with the track being too short, why doesn't Rockler lengthen the track.

Editor's note: On a large table the miter track is only used as a postioning guide and is not used to attach the hold downs. Hardware is include to mount the clamps with inserts into the underside of the table as shown on the right page of the following:
http://images.rockler.com/tech/Drill-Press-Table-Instrux.pdf

7) Submitted by Dennis Hennessy, from Arroyo Grande, CA on 1/19/2008

Customer Rating:

I have an older Craftsman 12-inch band saw. The work table is relatively small compared to newer band saws. The Rockler Band Saw Table makes my saw much easier to use with the enlarged work surface, adjustable fence, and t-track with standard miter slot.
The unit was easy to install and is very stable. I bought extra inserts and the 4-1/2 inch resaw guide at the same time. All of these add value to the table giving my saw a valuable upgrade.

See all 18 reviews...

Customer Reviews and Photos for:Rockler Band Saw Table and Fence

ALSO VISIT:

Customer Reviews and Photos for:
Rockler Band Saw Table and Fence