- Overview
- More Info
- Reviews
The easy, accurate way to get perfect-fitting box joints. The Woodsmith Box Joint Jig attaches to any miter
gauge and works on any table saw or router table. Use the Freud Box Joint Cutter Set (sold separately, 27371)
to make precise joints on your table saw, or our 4-Piece Straight Bit Set (sold separately, 60579) using your router.
Technical Details
- Cuts box joints from 1/4" to 13/16" wide
- Micro-adjust feature allows adjustments of less than 1/64"
- Secure-lock settings keep the jig in place while in use
- Plastic backing strip helps eliminate chip-out
What's In the Box:
One Box Joint Jig, instructional DVDBest Used With:
Freud Box Joint Cutter Set (27371)
4-Piece Straight Bit Set (60579)
|
| |
Customer Reviews and Photos for:
Woodsmith Box Joint Jig
|
Average Rating:
4.1
(14 customer reviews)
$119.99
Add your review...
|
|
|
1) Submitted by
Tom McDermott, from Holland, PA
on 12/29/2012
Customer Rating:
I have made some great looking boxes with this jig. But still its not easy. It still takes time and skill and a lot of work to make a good looking box. But without this jig, it would be 10 times harder to do it completely by hand. One thing I found that helps it to use a digital caliper instead of the old analog caliper. Yea, I know its more money, but it helps a lot.
|
|
2) Submitted by
Dave C, Resser, from Santa, ID
on 3/7/2011
Customer Rating: 
I have used this product several times since I recieved it and after reading the manual and watching the video I find it very easy to use and the fit is very good. I highly recommend this product.
|
|
3) Submitted by
Mark Fuller, from Poway, CA
on 10/31/2010
Customer Rating:
Bought the Jig. Read the instructions. Watched the video. Made a perfect joint on my first try. Very easy to use. Very well made. Highly recommended. :
|
|
4) Submitted by
Tim Marchie, from Kent, WA
on 5/20/2010
Customer Rating:
Tried making my own jig and ended up with firewood every time... Out of the box - easy to set up, easy to use and great results - worth every penny.
|
|
5) Submitted by
Dale Stanton, from Fresno, CA
on 5/13/2009
Customer Rating:
Bought the jig to make several small boxes out of some very expensive wood. I watched the DVD and with the directions, setup took just a few minutes. Ten minutes later I had my first test joint with 1/4" fingers on a six-inch wide board. The fit was perfect. I used calipers to make my initial settings after my first cut. Perfect, snug fit the first time out. This jig works great.
|
|
6) Submitted by
Kurtis, from Troy, NY
on 2/8/2009
Customer Rating:
I thought the instructions, which have lots of pictures, were great. This jig is really well built, and as a result is nice and heavy. The setup takes a bit of patience, but isn't hard. I have found that a clamp helps on the first cut, but then all of the rest are nice and tight if the "key" is properly adjusted. Make sure you square the jig very carefully to the blade. Well worth the price.
|
|
7) Submitted by
Ken Downey, from Brandon, MS
on 10/23/2008
Customer Rating:
After building a box joint jig that I could only use on my table sawand was very inefient to use, I decided to try the Woodsmith Box Joint Cutter jig and was very pleased with how easy it was to use. The DVD video included with the product illustrated how to set and use on both the table saw and the router table. I was set up and making cuts within 15 minutes. It works great!
|
See all
14 reviews...
|
Home  Routers and Accessories Dovetail Jigs and Dovetail Templates Woodsmith Box Joint Jig 
|
(1)
