Roller Support with Universal Clamp

Our exclusive roller support gives you all the support you need in the shop or on the job site! You’ll get perfectly level alignment and support for any outfeed application on any tool in your shop. Innovative clamp easily attaches to any sawhorse built with either horizontal or vertical 2x’s (2x4, 2x6, etc.). Plus, rotating roller head accommodates any setup!

More...

Unique 3" low profile allows the roller support to be clamped on a workbench or saw horse for use with chop saws and planers. Roller can be adjusted side to side for a full 11" support over the bench from the edge. Features 1-1/2" x 17" steel ball bearing roller with spring-loaded axle and side-to-side adjustability for workbench applications. Height adjustment from 3" to 15-5/16". With 90-lb. weight capacity. Patented.

Position your roller exactly where you need it!

Allows you to get perfectly level alignment as well as support for any outfeed application.

Roller adjusts in three directions!

Reposition Roller
at 90 Degrees
Roller head can be rotated 90 degrees to align correctly in any direction.

Roller Extension
Roller can be shifted side to side in either direction for up to 11'' of support over a workbench.

Roller Height Adjustment
Roller lowers to 3'' above table — ideal for chop saws and planers mounted on a bench! Roller can also be extended up to 15-5/16''

Horizontal Application	Vertical Application	Easy Storage Easily hangs on the wall for storage, giving you quick access to this do-everything stand!
Clamps easily to any sawhorse built with any size 2x material (2x4, 2x6, etc.) either horizontally or vertically, or on workbenches up to 2-1/2'' thick.

Works in a variety of shop applications!

Workbench Band Saw	Workbench Table Saw	Workbench Planer
Sawhorse Chop Saw	Workbench Chop Saw	Workbench Drill Press

Back to overview

Customer Reviews and Photos for:
Roller Support with Universal Clamp

Average Rating:

3.7
(23 customer reviews)

$45.99

Add your review...

1) Submitted by Ira, from Kirkland, WA on 4/5/2013

Customer Rating:

I have a small workshop, no room for a sawhorse or tripod roller support, so made a L shaped extension attachment for the table my portable table saw sits on, out of 2x4 and an aluminum brace. I made the table when I got the saw. One end of the attachment just slips into the cleats on the table, and the roller support clamps to either arm of the attachment. It all folds up and stores easily. It turns out so far to be very sturdy. Height adjustment is a little finicky but acceptable. This roller support is just what I needed for maximum portability, space saving, flexibility of positioning and functionality. I may add a metal sheet to the underside of the L-frame to prevent the clamp from pressing into the wood, but for now it seems just fine.

Roller support mounted on table extension L-frame
(click to see full-size picture in new window)
Product Review for Roller Support with Universal Clamp - Rated 5 Stars

Product Review for Roller Support with Universal Clamp - Rated 5 Stars

2) Submitted by Todd Bachler, from Pleasant Grove, UT on 4/4/2010

Customer Rating:

I ordered 2 of these supports and have found them very versatile and well made.

3) Submitted by Richard West, from Oak Ridge, NJ on 1/29/2010

Customer Rating:

Bought this to serve as an output guide roller for our Coda cold-mount press which is used to laminate and mount wide format digital inkjet prints. It's adjustable height and wide width makes it perfect for those long prints as they roll out of the press. Well worth the sale price.

4) Submitted by Tom Bankers, from Cedar Rapids, NE on 11/8/2009

Customer Rating:

These roller supports are well made and are very handy in the shop. I have a small shop and many bench top style tools. The roller supports effectively add the needed table length and width to make the smaller versions of good tools work well. I especially like them with my jointer and router. I would like to see the height adjustment shaft be longer and round. A round shaft would give you an additional adjustment that may come in handy. I would recommend this product.

5) Submitted by LStockert, from Bismarck , ND on 6/12/2009

Customer Rating:

Excellent Product - Add a 2-1/2" x 1-1/2" to the face of your bench to create a 2-1/2" Shelf the length of the bench - Allows you to move the camp wherever you need it along the entire bench.

The product would be better if the square tube shaft for vertical height adjustment was 28" long instead of the 15" - Or if they offered a longer one (28" long) as an optional piece.

Other than that - what wonderful service Rockler and Speed-e offers. I am impressed!

6) Submitted by Ronald Whitney, from Maple Plain, MN on 2/5/2009

Customer Rating:

I would rate this product excellent if it came with any sort of a users guide. The only instructions that came with mine were on the box which is a little large to store in my file cabinet for future reference. I am very impressed with the quality and versatility of this roller support.

7) Submitted by Terry Schneider, from Tallahassee, FL on 11/27/2008

Customer Rating:

This little guy is perfect. No more stacking cut offs under long boards. Yahoo!

See all 23 reviews...

Roller Support with Universal Clamp

Customer Reviews and Photos for: Roller Support with Universal Clamp

Customer Reviews and Photos for:
Roller Support with Universal Clamp