Now it’s easy to create a distinct, stylish look with crown molding! Our innovative new compound miter jig makes it simple to cut difficult compound miters with a standard miter saw.
Jig holds
molding at correct angle to eliminate complex compound angles. All you
need to do is make a 45º cut! Features easy-to-follow reference guide
attached to the jig. Can be used on cove and crown molding 2" to 4-1/2"
wide. Fits any 10" and larger miter saw.
Miter
Saw Not Included.
Warning!
For
your own safety, read and follow your manufacturer's instruction manual
and safety warnings before operating the tool. Always use safety glasses.
Cutting
reference guide is included on the jig.
Cutting
90º Inside Corner:
Left
Piece:
• Set miter saw to 45º right.
• Position piece to be cut and jig to the right side of the blade.
Right
Piece:
• Set miter saw to 45º left.
• Position piece to be cut and jig to the left side of the blade.
Note:
Always cut workpiece with bottom edge up.
Cutting
90º Outside Corner:
Left
Piece:
• Set miter saw to 45º left.
• Position piece to be cut and jig to the right side of the blade.
Right
Piece:
• Set miter saw to 45º right.
• Position piece to be cut and jig to the left side of the blade.
Note:
Always cut workpiece with bottom edge up.
We’ve
made cutting crown molding easy!
Jig
Setup: 1) Place your molding in the jig with the bottom edge resting
against the back fence. Be sure the molding is positioned correctly. 2) Adjust the movable fence so it butts against the edge of
the molding as shown.
Cutting
a Miter: 1) Set the miter saw according to reference guide shown on
the jig. 2) Position the jig on the correct side of the blade, keeping
it at a minimum of 1/2" from the blade. 3) Position the molding in the jig and hold both the jig
and the workpiece against the miter saw fence. Warning: Always keep
hands at least 4" from the miter saw blade. 4) With the power off, check the path of the blade to validate
it clears the jig. 5) Make the first cut and immediately let the saw come to
a complete stop before raising to its rest position.
1) Submitted by
Bill Williams, from Star, MS
on 8/20/2009
Customer Rating:
I just received my Rockler Crown molding jig. I have now used it for a couple days now adding crown molding to a renovation project and it works perfectly. It makes an amateur look like a pro. Just follow the instructions for a perfect fit. I highly recommend it to any one wanting to have that pro finished result.
2) Submitted by
Holt Hoffman, from Olympia, WA
on 6/12/2009
Customer Rating:
Worked as described. Was able to successfully miter large three inch crown molding onto kitchen cabinets. Granted all the miters were 90 degrees, but it takes out the guess work of whether you're holding the molding in the proper position while cutting.
3) Submitted by
Dave Mentink, from Hot Springs Village , AR
on 3/31/2009
Customer Rating:
It worked great. No,problems with the miter cuts. They were neat and clean. Best jig I have used.
4) Submitted by
Tom D, from forked river, N.J.
on 3/30/2009
Customer Rating:
Excellent jig. I wish I purchased one years ago. Made the job much easier.
5) Submitted by
Patrick K. Murphy, from Naperville, ILLINOIS
on 3/29/2009
Customer Rating:
Used the first time to finish the bedroom crown molding project. Each miter joint, both inside and outside, were perfect. Purchased the 18" True Angle protractor at the same time and found it to be an absolute necessity in getting perfect joints. Highly recommend these products for professional results as well as time/money savers.
6) Submitted by
Dale S, from Macon, GA.
on 3/21/2009
Customer Rating:
Very easy to use. Make all cuts great.
7) Submitted by
Charles, from Kansas City, MO
on 3/5/2009
Customer Rating:
Haven't used it but playing around with it I think it will be a very simple solution to cutting crown moulding especially when used with the Starrett Protractor Angle.
"I am disabled and my doctors advised me to get a hobby of some kind. After a lot of consideration and talks with my 13yr old son, we decided on woodworking. We turned an extra bedroom into a workshop and we now both just love it. I have done business with many companies on the internet and on the phone ( not just woodworking companies) and i have never found a company that gets an A+ on everything like Rockler does. Rockler has very kind people that treat you well over the phone and they stand behind their products 100% like no other company i have ever done business with. You can be sure that my son and myself will always be Rockler customers." -
Harry & Harry SLC, UT
- 07/17/2009 See more...
CART
Jig
Setup:
(4.5)
