Home Hand Tools and Shop Accessories Screw Driving Tools Rockler/Insty-Drive Countersink Set, #8


Only at Rockler Rockler/Insty-Drive Countersink Set, #8

Rockler/Insty-Drive Countersink Set, #8

$29.99Each   Scoll Down to Order
Currently In Stock


Average Rating: Customer Review Rating: 4.0  (18 customer reviews)


See More Images
Rockler Advantage


59971 - #8 Countersink Set 59979 - 4 69015 - Quick Change Chuck (Sold Separately)

  • Overview
  • More Info
  • Reviews
Bookmark and Share  
Here’s a great way to get introduced to the Rockler/Insty-Drive system! Set contains our exclusive Insty-Driver, #8 high speed steel (HSS) tapered hex shank bit with 4-flute countersink, #2 square drive bit, #2 Phillips power bit, and 1/8" hex wrench. 59979 4'' Insty-Driver sleeve also sold separately.

Bookmark and Share  
How the Rockler/Insty-Drive System works
Drill the pilot hole with the countersink bits or the self-centering bits, which both have a hex shank to prevent slipping.
Slip on the Rockler exclusive Insty-Driver, which fits over Rockler countersink and self-centering bits. Magnetic tip holds all 1/4" style insert bits and screws.
Drive home the screws. Then slip off the Insty-Driver and do it again. You'll get fast and accurate hardware installation every time!

Rockler Exclusive Insty-Drive System
Rockler and Insty-Bit have teamed up to give you fast and accurate hardware installation every time! Switch from drilling to driving instantly. Just drill the pilot hole, slip on the Rockler Exclusive Insty-Driver and drive home the screws. It's as easy as 1-2-3! Components are engineered to meet the highest standards for use in industrial applications. They bring together the best of Innovation from Rockler and Insty-Bit in a precision, time-saving drill and drive system. Plus, all the Rockler/Insty-Drive bits are precision-ground high speed steel (HSS) that keep a sharp edge longer.

The High Speed Steel (HSS) Advantage
All Rockler/Insty-Drive bits are precision-ground high speed steel (HSS) that resist wear and overheating. High speed steel holds a sharp edge longer even when hot because it maintains temper and hardness. Simply sharpen on a bench grinder.

Rockler Exclusive Insty-Drive System Self-Centering Bits
Ensures accurate hinge and hardware installation every time. The HSS bit provides perfectly centered and straight pilot holes, so that even an amateur can install shift-free hardware that lasts. The drill guide snugly fits in the hinge countersink, ensuring perfectly centered pilot hole.


Without Rockler/
Insty-Drive Self-Centering Bits
With Rockler/
Insty-Drive Self-Centering Bits
Misaligned and damaged screw heads like the example shown above left are virtually eliminated with the self centering bits of the Rockler/Insty-Drive System.
#8 Countersink Set is a great way to get introduced to the Rockler/Insty-Drive system! Set contains our exclusive Insty-Driver, #8 high speed steel (HSS) tapered hex shank bit with 4-flute countersink, #2 square drive bit, #2 Phillips power bit, and 1/8" hex wrench.

OPTIONAL ACCESSORIES :

69015 - Quick Change Chuck
The 3/8" shank chuck includes a quick-release sleeve and accepts all 1/4" hew shank bits and drivers.
 
Bookmark and Share  

Customer Reviews and Photos for:
Rockler/Insty-Drive Countersink Set, #8

Average Rating:
Customer Review Rating: 4.0
4.0
(18 customer reviews)
$29.99

Add your review...
1) Submitted by Robert Smith, from Old Fort, NC on 10/18/2009
Customer Rating: Customer Review Rating: 4.0
Unless I am very confused you cannot use the driver with the depth stop collar (not included, comes with the larger kit) installed. Otherwise it seems like a very nice setup. The set with case that was on sale for $19.95 without the driver was a nice compliment.
2) Submitted by Ron, from Albert Lea, MN on 10/16/2009
Customer Rating: Customer Review Rating: 5.0
I like Insty-Drive because you don't have to waste a lot of time changing bits, or you don't need the second drill with the other bit in it. Just pure handy all around I feel.
3) Submitted by Dave Perry, from Chattanooga, TN on 10/16/2009
Customer Rating: Customer Review Rating: 4.0
I tried the Insty-Drive after using Dewalt, Makita, and Ryobi drivers. The Insty drive served me better than the others in three ways: 1)The pilot drill is full-length. The others can't show much drill because if their short shaft. 2)Insty-drive parts snap together snugly and stay put. I was constantly dropping the bits out of the Dewalt, often breaking the pilot drill.
3)Insty-drive leaves a very clean countersink with its three cutters. The others showed a lot of tearout.
This tool didn't get 5 stars from me for two reasons: It is just too long to drive in tight places (I use it mostly for custom installations) and I don't like having to keep up with its separate allen wrench. The other brands have the wrench built-in.
4) Submitted by Joe Beaton, from Lynn, MA on 7/2/2009
Customer Rating: Customer Review Rating: 5.0
Insty Drive is compact, lightweight with nice balance; I enjoy having this in my tool arsenal!
5) Submitted by Oren Culpepper, from Malvern, AR on 3/28/2009
Customer Rating: Customer Review Rating: 5.0
I have used the Insty-Driver system for a couple of years. It is the most effficient system I have seen. I am in a group that does a good bit of woodworking and each of them are impressed with the tool. This last purchase was the fourth one that I have given as a gift. I thought they would be more impressed with their own and they seem to be.
6) Submitted by William Jansen, from Jackson Springs, NC on 12/9/2008
Customer Rating: Customer Review Rating: 2.0
I used the drill twice and was changing the countersink depth and the drill bit snapped in half. I didn't see any warranty on this product. I only purchased it about a month ago.

Editor's note: Our customer support at 800-279-4441 will be able to assist in replacement if you feel the breakage was a result of defect rather than manner of usage.
7) Submitted by Thomas Sydlo, from Hialeah, FL on 11/16/2008
Customer Rating: Customer Review Rating: 5.0
As a master craftsman, and home builder I have tried many drill and drive systems, none compare to the Insty Drive system.
This tool is very well made and will last for a very long time. I enjoy using this system so much that I have purchased another. It is a time saver. I did notice that sometimes the sleeve needs a little turn to lock on, but overall it is a tool everyone should have. Highly recommended.
See all 18 reviews...
 
Order this Item
Countersink Set:
Quantity Item Number Item Stock Status Price
59971 #8 Countersink Set
In
Stock 		$29.99 Each
Insty-Drive Accessories:
Quantity Item Number Item Stock Status Price
68923 Replacement 11/64" Tapered Drill Bit #8
In
Stock 		$7.39 Each
69015 Rockler Insty-Drive Quick-Change Chuck
In
Stock 		$15.39 Each
59979 4" 1-2-3 Drill and Drive Sleeve
In
Stock 		$15.99 Each



Home Hand Tools and Shop Accessories Screw Driving Tools Rockler/Insty-Drive Countersink Set, #8
Locate Your Nearest Rockler Store

"Rockler is my only source for fine tools and woodworking supplies. Every item I have purchased from them has been better than I anyone would expect from other suppliers. Thanks to them I have begun the wonderful and rewarding journey into turning, from my lathe to all my turning tools and gadgets, I am a fan. Rockler has enhanced my knowledge and expanded my enthusiasm. They are customer oriented. "
- joe cap - 03/08/2013
See more...
Copyright © 2013, Rockler Companies, Inc. This is a Secure Shopping Site
web1