Our 11-piece template guide kit will work with any template, pattern or jig
for perfect duplicate routing. Ideal for stair, pattern and hinge routing,
dovetailing and craft/hobby work. Fits any base with a 1-3/16'' diameter
center hole.
Kit includes 1/4" and 1/2" shank custom centering bits for accurate
template centering every time, two lock nuts and seven of the most
commonly used template guides.
Includes the following template guides:
1/4" (inside) x 5/16" (outside)
9/32" (inside) x 3/8" (outside)
11/32" (inside) x 7/16" (outside)
13/32" (inside) x 1/2" (outside)
17/32" (inside) x 5/8" (outside)
21/32" (inside) x 3/4" (outside)
5/8" (inside) x 51/64" (outside)
Template guides fit perfectly in any base with a 1-3/16" diameter
center hole.
Comes in handy plastic storage case.
Customer Reviews and Photos for: Rockler Router Guide Bushing Kit
1) Submitted by
Lee Rhoads, from El Sobrante, CA
on 7/5/2009
Customer Rating:
Had an opportunity last week to use these guide bushings with my Porter Cable 690 router. I was working on a special project that needed slots in 3/4 inch plywood and required precise alignment. These guide bushings made the job a piece of cake (figuratively speaking). One template required a 1/2 inch platform and the guide bushing I wanted to use was deeper than that. This meant that the bushing needed to be altered slightly and being made from solid brass also meant it was fast and easy to accomplish. Can you tell that I am very pleased with this product?
2) Submitted by
Travis Gunn, from Buchanan Dam, TX
on 7/3/2009
Customer Rating:
Exactly as advertised. Centering guides are helpful. Would recommend.
3) Submitted by
Phil, from Ann Arbor, MI
on 3/25/2009
Customer Rating:
I have never used a router guide bushing before. these are of very good quality, easy to set up and delivered great performance. I used them with a jig to finish a curved edge on a dining room table. I look forward to finding additional uses for them.
4) Submitted by
Scott, from Murphy, NC
on 3/23/2009
Customer Rating:
Haven't had a chance to use the product yet. Doesn't fit my Bosch 1617evs router, but the bushings are well made. Very satisfied.
5) Submitted by
Richard, from Inverness, FL
on 3/19/2009
Customer Rating:
High quality materials/machining and pirce make this set an absolute bargain!! Recommend to all.
6) Submitted by
W.G. Dunning, from Jamestown, CA
on 3/14/2009
Customer Rating:
Mainly purchased router bushing set for my sign making template set. Worked like a champ. The sale price made it even better.
7) Submitted by
Steve, from N.Worcester, MA
on 2/27/2009
Customer Rating:
Product is very good quality all around. Setup is easy and true with the centering pieces. Case is well made. Be prepared to use longer shank-depth bits (3 inches or longer) since the bit will need to clear the bushing when seated in the collet correctly. ID and OD measurments are extremely accurate, I only wish the actual depth of each bushing was mentioned in the product description. I was not prepared for the depth limitations and had to purchase a bit 3.5 inches long with 1/2 inch shank to get past the depth of the bushing and deep enough into the workpiece. Absolutely no regrets on a fine purchase of a well made set all around. Accuracy, quality and price can't be beat. Recommended.
"Rockler is the leading name in Woodworking around here...always has what you need and more...Great service to boot. Thanks for being there." -
Dick Farino
- 01/04/2009 See more...
CART
(4.4)
