Home Hand Tools and Shop Accessories Clamps Bar Clamps 4-Way Equal Pressure Clamp


4-Way Equal Pressure Clamp

4-Way Equal Pressure Clamp

$31.99Each  
Currently In Stock


Average Rating: Customer Review Rating: 3.4  (17 customer reviews)




View Larger Image
Rockler Advantage



  • Overview
  • More Info
  • Reviews
Bookmark and Share  
Adjustable length clamp provides pressure from all four sides — ideal for big projects such as gluing table tops and shelving.
  • Applies pressure on workpiece face when edge-clamping to prevent bowing and buckling large panels.
  • Clamp attaches to any length 2 x 2’s (lumber and wood clamp pads not included).
  • One Clamp per Package
  • Includes one set of 2 parts. Two sets shown in photo.
  • See more Info to make wood pieces.
Bookmark and Share  
To make wood pieces, drill a series of 5/8'' holes spaced 2'' apart down the center line of the board face of a 2x4 piece of lumber. Then rip the board lengthwise through the centers of the holes, creating two pieces approx. 1-1/2'' x 1-11/16''. Rotate the notched boards so that notches are away from each other.
 
Bookmark and Share  

Customer Reviews and Photos for:
4-Way Equal Pressure Clamp

Average Rating:
Customer Review Rating: 3.4
3.4
(17 customer reviews)
$31.99

Add your review...
1) Submitted by Antoine, from Huntsville, AL on 4/21/2013
Customer Rating: Customer Review Rating: 4.0
I bought three sets years ago and have used them a lot. I have found that if the frame you mount these to warps or bows, so will the wood your are gluing will also. I decided on mounting the pieces to 1-1/2" square tubing using taping screws. Works great!
2) Submitted by Ericn O. Sund, from Watersmeet, MI on 7/17/2011
Customer Rating: Customer Review Rating: 5.0

I use 3 sets to make panels and they work well. I had to buy 3 more because the handles break loose from the screws! A  stronger connection would greatly improve the product. 2 things I added: tape the 2 bys so the glue won't stick and add a small 1/8" thick piece next to the semi circle by the clamp to keep them from jumping out of the slot.
3) Submitted by Dale, from Macon, GA on 6/14/2011
Customer Rating: Customer Review Rating: 4.0
Have not used, but will make the glue-ups for the table project that I plan to build this fall alot easier.
4) Submitted by Phil, from Scottsboro, AL on 12/5/2010
Customer Rating: Customer Review Rating: 5.0
I got another set after my loss to Katrina. Work out a system and the glue up procedure will go smooth. Use wax paper to protect the bars from glue. You don't need a gorilla to tighten the clamps. Shouldn't have tightened so much to break the clamp.
5) Submitted by John, from Eades, TX on 11/29/2010
Customer Rating: Customer Review Rating: 4.0
Did the table top job ok. Used other clamps also to make the job easier. The top was great with all joints tight and straight.
6) Submitted by Elizabeth McKinnon, from Jasper, GA on 10/9/2009
Customer Rating: Customer Review Rating: 5.0
Bought the clamps to make an end grain patterned cutting that I saw in a back issue of Wood Magazine. It did an excellent job of not only the end to end pressure but keeping the board flat! I did make the holes larger in the 2X4 as one review suggested! It was a good idea!
7) Submitted by Philip Bradshaw, from Williamsburg, VA on 9/26/2009
Customer Rating: Customer Review Rating: 4.0
I got a couple of pairs of these for gluing up panels for raised panel kitchen cabinet doors. As other reviews stated, they were a little awkward to set up, but once youfigure out a system they are not too bad. I made a couple of small blocks slightly thicker than the material I was clamping and inserted them in front of the clamp pads. After applying glue, I simply slid the assembled panel into the clamp and removed the blocks and I was good to go! I do augment the clamping strength with a pipe clamp when needed. I will try slightly larger holes in my 2X4 next time I make the rails as I agree the 5/8ths hole may be a little small for maximum clamping power. Overall, a usefull tool and good product!
See all 17 reviews...
 
Order this Item
Quantity Item Number Item Stock Status Price
20981 4-Way Equal Pressure Clamp, (One per Package)
In
Stock 		$31.99 Each



Home Hand Tools and Shop Accessories Clamps Bar Clamps 4-Way Equal Pressure Clamp
Locate Your Nearest Rockler Store

"Rockler Rocks. They have the best customer service.I am disabled and elderly so when I receive great service it takes me back to the days when everyone gave good service. Thank You Rockler you are the best. Keep up the good work."
- PAMELA NEWELL - 01/08/2013
See more...
Copyright © 2013, Rockler Companies, Inc. This is a Secure Shopping Site
web1