Kreg™ Heavy Duty Bench Klamp System

Now featuring Kreg’s new soft-gripped Bench Klamp! This ingenious system lets you assemble pocket-hole joints with ease and still enjoy a perfectly flat work surface. With the robust 10" x 10" x 1/4" solid steel insert plate recessed into your work surface, simply mount the powerful clamp into the plate’s keyed slot. When you’re done, just remove the clamp to work unobstructed.

Includes 10" x 10" x 1/4" thick steel plate and bench clamp that easily attaches to the plate. Rotating clamp has 3-1/2" reach for all your pocket hole needs. Non-marring pad won't damage your project. Ideal as a hold-down clamp for Kreg pocket hole jigs while drilling the holes. Join, drill, rout, sand and even finish with complete hands-free control of your project!

Customer Reviews and Photos for: Kreg™ Heavy Duty Bench Klamp System Average Rating: (5.0) (3 customer reviews) Add your review...

1) Submitted by Joe Roth, from Wooster, OHIO on 11/1/2009 Customer Rating: Have used the older hold down clamp with the smaller 3x4 plate mounted in a workbench,and loved it. But now have been setting up a new shop of my own rather than shared and really like the big plate. I use it set into a work bench, but also pull it out and move it around. It has enough weight and is so solid it is very useful in on other benches or on anywhere I need to work. It won't set flat because of the keyhole, but is closer than the regular face clamp.

2) Submitted by Ron Brogan, from St. Paul, KANSAS on 10/30/2009 Customer Rating: I had seen and used the clamp system at a relative's shop so I new knew how it worked prior to receipt. Nevertheless, I was surprised at the weight of the package when it was delivered. The bench plate is heavy-duty and the clamp is well made. The adjustment crank on the handle is a nice improvement over the standard vice-grip knurled knob on the Kreg kit-clamp. Flush installation is a little fiddly but I had bench-top recess cut in about an hour (didn't use the recommended pocket hole assembled routing jig. But I did make a similar jig from scrap). This is a multi-use tool. It works well for aligning pocket joints - that is it's primary purpose. However, I suspect it will get more use as a general purpose hold-down clamp. After I get accustomed to using it I might purchase a couple more of the smaller plates for installation at other locations on the bench or in the shop. Good tool and I would recommend it to anyone who has the Kreg system; and even others just looking for a good bench hold-down solution.

3) Submitted by Ronald Minutes, from Scranton, PA on 6/27/2009 Customer Rating: Just what I needed. I was about to build a window seat system, with 2 book cases and a window seat. I was going to use the Kreg pocket hole system to build everything, but the only thing I did not own was the Heavy Duty Bench Klamp. The bench klamp made it so much easier. It was the best investment I ever made. Actually The whole Kreg Pocket Hole System was the best investment I ever made. For those of you who never used the Kreg System, you would be supprised at all you could build.