1) Submitted by
Warren , from Huntsville, AL
on 11/20/2008
Customer Rating:
I too have been using my table saw without a splitter since I changed to using thin kerf blades. This not only greatly reduces the risk, but also prevents burn marks at a very low cost. It is an easy addition. I strongly recommend this device.
2) Submitted by
Mark U, from Westside, IA
on 8/18/2008
Customer Rating:
I had just tuned up my tablesaw and, then installed this splitter per the easy to follow instructions. It works as designed and I no longer burn maple when ripping long pieces. Well worth the low price.
3) Submitted by
Greg Little, from Prairieville, LA
on 9/7/2009
Customer Rating:
Flimsy piece of plastic garbage...It broke on the second day of use.
Editor's note: Our customer service team at 800-376-7856 will be able to arrange for either a replacement or credit for you Greg.
4) Submitted by
Craig, from San Jose, CA
on 2/4/2008
Customer Rating:
This is an ingeneous little piece of safety equipment, and probably the best $[] upgrade you can do for a table saw. I'd been using my table saw without a splitter for years because the blade guard was so awkward, but this gives me some measure of safety against kickback without any interference. I've already recommended it to every friend with a table saw.
5) Submitted by
Rob Pearce, from Scottsdale, AZ
on 1/4/2008
Customer Rating:
Although made from plastic, the installation jig allows for very percise fitting and is particularly effective in shop made zero tollerance throat plates. When used correctly, it is highly effective and has worked well for me.
One warning - be sure to match the splitter product to your blade kerf. There are three different sizes made. Check out the Microjig web site for details.
6) Submitted by
Chris, from Grand Marais, MN
on 6/13/2006
Recently I was injured by tablesaw kickback and a flying board. Terry at the Maplewood Rockler store suggested The MJ Splitter to reduce the risk of kickback.
This product is an elegant solution. While I bought it for safety reasons, I particularly like the burn free cuts it's giving me. It deserves a 5-star rating.
7) Submitted by
Kyle, from Hayfield, MN
on 1/2/2008
Customer Rating:
I have just begun using the splitter. I followed the installation guidelines accurately I believe. During rips on some rustic cherry boards the splitter bound in the kerf and pulled free from the zero clearance insert.
I have not given up yet, but am skeptical about the splitter
"I became disabled three years ago and had the hardest of times to find what I needed for my shop. But not now. You've got everything I can think of. Thank you! No more B.S. from the H.D. store here!" -
Joseph D.
- 09/19/2009 See more...
CART
(2.8)
