Rockler Pitch & Resin Remover

Ready-to-use solution quickly and easily cleans away the residue buildup that develops on blades and bits. Cleaner cutting edges will give you superior machining results and extend the life of your tools. Available in 16 fl. oz spray bottle or 1 quart size.

Technical Details: Pitch & Resin Remover is easy to use. Spray and coat thoroughly all surfaces. Let stand 5-8 minutes prior to using a cloth, brush or steel wool to remove residue. 1 quart concentrate makes 1 gallon of remover when mixed 1 part to 3 parts water, or can be used full strength if necessary. A shallow baking pan works well for soaking saw blades, plane knives and other flat cutting instruments. Use a jar-shaped container for soaking router bits, shaper cutters and drill bits. When buildup is heavy, re-apply as necessary. This solution may be sprayed to reach crevices and locations where additional cleaning is required. Dry tools thoroughly to avoid rusting while in storage. CAUTION: Not intended for consumption. If ingested, rinse mouth, give water and seek medical attention. Persons with allergic reactions should wear gloves to avoid skin contact. KEEP OUT OF REACH OF CHILDREN. What's in the Box? (1) Rockler Pitch & Resin Remover

MSDS: Rockler Pitch and Resin Remover MSDS: Rockler Pitch and Resin Remover

Customer Reviews and Photos for: Rockler Pitch & Resin Remover Average Rating: 4.5 (8 customer reviews) $10.99 Add your review...

1) Submitted by Randy, from Boulder, CO on 11/14/2010 Customer Rating: Works well and is more economical than similar products.

2) Submitted by Scott, from Tulsa, OK on 10/9/2010 Customer Rating: Sprayed on blade, let it sit for about 5 minutes and brushed off all pitch. Worked great.

3) Submitted by Austin Wade, from Enid, OK on 6/17/2010 Customer Rating: I cleaned two rip blades, two crosscut blades, one combination blade and a dado set. All were totally cleaned and were better cleaned than with any product I've every used before. Needless to say, I'm totally satisfied.

4) Submitted by Phil Hall, from Fredericksbug, VA on 3/6/2008 Customer Rating: The stuff really works! I just cleaned up badly encrusted band saw blade.

5) Submitted by Scott Morneau, from Saco, ME on 3/5/2008 Customer Rating: I was amazed at how quick the product works. I use it on my table saw blades and router bits for a quick touch up between runs.

6) Submitted by Michael Mittica, from Alva, FL on 2/21/2008 Customer Rating: In addition to using on my saw blades and router bits, it works great on chain saw chains after sawing logs on my property that contain a lot of pitch that gums up every thing. It doesn't seem to harm the plastic on the saw either.

7) Submitted by Ernie Silva, from Humble , TX on 2/19/2008 Customer Rating: I had been using oven spray cleaner, but found it taking too much of the protective off. I used Rockler's Pitch & Resin Remover for the first time and found it easy to use and very effective.

See all 8 reviews...