Clamp-It™ Deluxe Kit

Tackle all of your clamping jobs with our original Clamp-It system and the NEW Mini Clamp-It!

Deluxe Kit includes four full sets, including:

• Two Clamp-It Assembly Squares
• Four 5" Clamp-It Bar Clamps
• Two Mini Clamp-It Assembly Squares
• Four 4" Mini Bar Clamps

Clamping your projects has never been easier! This is the complete assembly square and clamp system for all project sizes. With this offer, not only will you receive the great features of the the Original Clamp-It Assembly Square, you ALSO are getting the benefits of the Mini Clamp-It at half the size! Align it, clamp it and fasten it to get perfect 90º angles every time. The bar clamps are held in place on their respective assembly square with a friction fit to make assembly quick and easy with one-handed operation. Includes four full sets, including two Clamp-It Assembly Squares, four 5" Clamp-It Bar Clamps, two Mini Clamp-It Assembly Squares, and four 4" Mini Bar Clamps. The original Clamp-It Assembly Square measures 8" x 8" x 1-1/2". Mini Clamp-It Assembly Square measures 4" x 4" x 1-1/4". Assembly squares are manufactured from high impact, rigid polycarbonate. Bar clamps have fixed heads with movable tailpieces. With comfortable, ergonomic handles.

Customer Reviews and Photos for: Clamp-It™ Deluxe Kit Average Rating: (2.7) (10 customer reviews) Add your review...

1) Submitted by John Dickinson, from Soquel, CA on 9/27/2009 Customer Rating: I've used my Clamp-Its for many projects, but the craziest was assembling these 5'x6' picture frames, which are constructed something like a torsion box. Keeping them square was an important priority, and I don't know how else I might have done it. To be honest, I resisted buying these things for a long time, but I like them so much I'm in the process of designing a case for them! Squaring a 5'x6' Frame Box (click to see full-size picture in new window)

2) Submitted by David, from Moraga, CA on 4/20/2008 Customer Rating: My first impression was not good but I was wrong. This kit is VERY useful for holding 3/4" material for cabinets. It may not be suited for picture frames and is not suited for face frames. I'm using these clamps to assemble a good many plywood cabinets for the garage. The standard size for my project is a 32 x 32 x 16 box of 3/4 birch. Butt jointed using 2.5" screws. I clamp four inside corners and then screw them. I flip the cabinet over and clamp the remaining inside corners and screw them. I can then add the remaining screws and any fixed shelf. The cabinet will be nearly square and easily pulled into perfect alignment with a backer sheet. The clamp it kit works very well to align the sides and to prevent slipping when the screw holes are drilled or nails driven in.

3) Submitted by Gary VandenBerg, from Grand Haven, MI on 5/25/2008 Customer Rating: Like the other comment stated, they were good at establishing a 90 degree angle but I didn't care for the clamps. They were rather small and kind of cheap. The project I was working on was only 3/4" wood which worked quite well but using anything bigger than 3/4" wood may cause you to look at other options. I also used other clamps that I had to hold them in place which worked as well. All in all a good product.

4) Submitted by Ricky, from Calvert, MD on 7/14/2008 Customer Rating: I found the 90 degree corners most useful but the larger slide clamps are useless. I had to use other clamps. The clamps supplied are not deep enough and if they were they still do not work, will not tighten up at all they just keep sliding no matter how you hold them to make them work. I should have just purchased the corners. I certainly would not purchase the kit again.

5) Submitted by Richard, from Clifton, KS on 12/20/2006 This kit works okay on small projects. However, I have found to get good quality picture frames or boxes you will have to have two sets and do the whole unit at once to keep your corners square.

6) Submitted by Bob Peery, from Redmond, WA on 9/17/2007 Customer Rating: I am not an experienced wood worker, so it may have just been me. But figuring out which clamps went with which braces in specific situations was not intuitive. There were no instructions in the box at all. Based on the obvious expertise of the company in general I expected a more immediately useful package. For example, I was building a storage box for dining room table leaves. Pretty good size, but because of the way the braces and clamps are designed, I ended up using the small braces and the large clamps for my work...just didn't make sense. The clamps need a broader range of adjustment.

7) Submitted by Al Kelley, from Kingston, TN on 1/31/2008 Customer Rating: The Clamp-It Assembly squares work good to establish a 90 degree corner, but the included clamps are almost useless. The throat depth of the clamps are too shallow, they don't even reach to the center of the Assembly squares so you are always having to clamp off-center of the Assembly squares. If you are trying to use these on a picture frame, which is usually not as wide as the Assembly square, then the clamps won't even reach the picture if the frame is laying flat on the work bench. I was very disappointed with the included clamps and to make matters worse I actually bought additional clamps which was a waste of money. I would suggest just buying the Assembly Squares individually and then buy some better clamps with a deeper throat capacity.

See all 10 reviews...