- Overview
- More Info
- Reviews
Add a new level of accuracy to your band saw! Designed by
band saw expert Mark Duginske, this fence provides an
unprecedented level of rigidity, adjustability and
precision.
Features:
- Aircraft grade aluminum
- Heavy-duty, solid extruded aluminum fence and dovetail
bracket design provide plenty of support for rugged
operations
- Two simple adjustments for blade drift
- Precision lens cursor is magnified and easy to read for
even the smallest position changes
- Mounting Rail is 26'' long Fence is 18'' long
- Finish is Anodized for easy clean-up
- Pre-drilled holes on the mounting rail fit on most 14''
Band Saws
- Easy to Remove - no tools required!
- Optional resaw guides provides a higher level of control
when adjusting for band saw blade drift.
|
| |
Customer Reviews and Photos for:
Kreg Precision Band Saw Fence
|
Average Rating:
4.8
(18 customer reviews)
$107.00
Add your review...
|
|
|
1) Submitted by
Peter, from Menlo Park, CA
on 3/29/2013
Customer Rating:
I installed this fence in 20 minutes on my oldie but goodie Rockwell 14" bandsaw, and was soon re-sawing 1/8" slips off of 4" high rift sawn white oak. The package includes the correct bolts for for my saw {not sure exactly what size they are-not 1/4" -20, but close} and also for metric holes. It's a real pleasure when you buy a product that lives up to your expectations of good design, build quality, and effectiveness.
|
|
2) Submitted by
Mark Murphy, from Andalusia, AL
on 11/18/2012
Customer Rating:
I installed this on a 14 inch Jet that I use for resawing. It was very easy to get the fence square with the table and tracking with the cut. I was surprised to find that I could cut a very thin slice that was dead on accurate with very little fuss.
|
|
3) Submitted by
Chris, from Smyrna, DELAWARE
on 5/23/2011
Customer Rating:
I am very happy with this fence. I have a Craftsman 10" saw and had to tap some holes in order to fit the Kreg on, but it was well worth it.
|
|
4) Submitted by
Phil Miller, from Portsmouth, NH
on 2/10/2011
Customer Rating: 
The fence is very nice, but the existing holes in my Reliant 14" table are too high. To make it work I had to lower the fence assembly by putting some 3/4 X 2 1/2 wide oak between my table and the new guide. I used wood screws to attach to oak through the existing holes from inside the table. Before attaching, I cut a slot in the oak for the miter. I used wood screws to attach the guide to the oak and was able to lower it so the assembly was flush with the table when assembled. I don't have the tools to drill and tap the cast iron table, so this works fine.
|
|
5) Submitted by
Jaze, from Elgin, IL
on 1/4/2011
Customer Rating:
Super easy to install, excellent instructions. I love this fence! And swapping between the normal fence and the low fence is just a matter of loosening the bolts, turning the fence around and reinserting the bolts. It's so easy, which means I do it every time, and that makes the bandsaw both safer and gives me better cuts with the guide assembly where it's supposed to be.
I also ordered the micro-precision adjustment thingy highly technical term there, but honestly, I don't use it, and it can get in the way. So it's off the fence for now until I need super precise cuts, which is about never.
But the basic fence? Super. Awesome. Simple.
|
|
6) Submitted by
Rick Heinemeyer, from Richland, WA
on 12/23/2010
Very easy to install on my 14" Jet band saw. Awesome Fence.
|
|
7) Submitted by
John Hudnall, from Pahrump, NV
on 9/2/2010
Customer Rating:
Installation was a breeze. All components very well made providing accurate cuts. Five star rating from me.
|
See all
18 reviews...
|
Home  Power Tools and Shop Accessories Add-On Tables and Fences for Power Tools Kreg Precision Band Saw Fence 
|
(0 Items)
