- Overview
- More Info
- Reviews
Includes everything needed to clamp two corners at a time: two original Clamp-It® Assembly Squares and four 5'' Clamp-It® Bar Clamps. Bar Clamp is held in place on the Clamp-It® Assembly Square with a friction fit to make operation quick, easy and one-handed.
Technical Details:
- Ideal for picture frame joinery, RTA assembly, drill press jigs and adding a shelf.
- Rigid polycarbonate.
- Assembly Square measures 8" x 8" x 1-1/2".
- 5'' Clamp-It® Clamps feature fixed heads with comfortable ergonomic handles.
- Clamps have fixed heads with movable tail pieces.
- Bar has anti-slip detents to prevent slippage when tightening.
- Throat depth is 3/4'' to clamp center on the assembly square.
- Maximum clamping thickness when used with the Clamp-It® Assembly Square is 2-1/2''.
- Maximum clamping thickness without assembly square is 4-1/2''
What's in the Box?
- (2) Clamp-It® Assembly Squares
- (4) 5'' Clamp-It® Clamps
|
| |
Customer Reviews and Photos for:
Clamp-It® Assembly Square 6-Pc. Kit
|
Average Rating:
3.4
(22 customer reviews)
$52.99
Add your review...
|
|
|
1) Submitted by
Walt Johnson, from Poquoson, VA
on 1/18/2011
Customer Rating: 
I finally ordered the squares and clamps when it went on sale. Not sure it's worth $ but worth it when on sale. The squares are excellent. Used them shortly after receiving them to build an aquarium stand. Made the process a lot simpler and faster.
Clamps are not high quality as the ends tend to slip easily making it difficut to hold all the pieces and both ends of the clamp. Once installed, they held the squares in place. Found it easier to use a single handed, heftier clamp. Overall, glad I purchased it. Really glad I got it on sale.
|
|
2) Submitted by
Popa Rich, from Lynbrook, NY
on 11/27/2010
Customer Rating:
Angle Brackets worked well. Assembled door frames with pocket holes & screws. Setup was clumsy, three hands needed at times, clamps didn't always lock when needed.
However once clamps and squares were in place, fastening wood together had good results. I recommend them as a must have tool for the shop.
|
|
3) Submitted by
Dennis, from Cape Cod, MA
on 1/3/2010
Customer Rating:
The plastic angles are tough and work great. The clamps need a little work, their throat needs to be a little larger and handles are too small. I'm happy with them and would buy them again.
|
|
4) Submitted by
Victoria Lee, from New Orleans, LA
on 1/21/2009
Customer Rating: 
Prior to my getting the Clamp-It, I had difficulties squaring my project. I highly recommend them, especially to beginners.
|
|
5) Submitted by
Eleanore, from Pecos, NM
on 1/20/2009
Customer Rating:
After seeing the Clamp-It assembly in action and then using it myself in my brother's shop, I couldn't pass up purchasing MY set. I build a number of things that require right angle joins, and until now, a true 90 join was a hit/miss proposition for me. This product WORKS. EVERY time.
|
|
6) Submitted by
Orin Hinckson, from Lubbock, TEXAS
on 1/5/2009
Customer Rating:
Got these to replace some shop made ones. These are much better. Use them for assembly, drill press guides, angle cut on crosscut sled. Get the Mini and the Adjustable Clamp-it too. The adjustable one locks in your angle to keep your irregular shaped work in place. Buy these, you'll see why. Another well made product by Rockler.
|
|
7) Submitted by
Mike, from Lombard, IL
on 1/3/2009
Customer Rating: 
Plastic squares work well for getting an accurate square and holding work pieces. The clamps however are not that great. The end slide has a tendency to slip too easily and not catch on the bar. If they would get better clamps for this kit it would be easy for me to raise my rating to very good.
|
See all
22 reviews...
|
Home  Hand Tools and Shop Accessories Clamps Clamp-It Assembly Tools Clamp-It® Assembly Square 6-Pc. Kit 
|
(1)
