Axles for the wheels. Sanded and ready to finish.
|
Use axle 21691 for wheels 21550, 21576, 21600 and 21626. Use axle 21725 for wheels 21675. Four axles to a pack.
|
| |
Customer Reviews and Photos for:
Maple Axles
|
Average Rating:
3.7
(6 customer reviews)
Add your review...
|
|
|
1) Submitted by
John Hutchinson, from Delaware, OH
on 12/24/2012
Customer Rating: 
I've read the complaints about them being oversized, but I see that as a bonus. I've always followed the suggestion of wooden toy maker David Wakefield and crimped them with a pair of pliers rather than sanding them. This reduces the diameter just enough to allow easy insertion and provides channels for the glue. Works like a champ!
|
|
2) Submitted by
Emmett Schrader, from Warsaw, IL
on 10/27/2009
Customer Rating:
I was very satisfied with this product.
|
|
3) Submitted by
Larry Irvin, from Oak Harbor , WA
on 12/6/2008
Customer Rating: 
I ordered some of each size and found that about half of each size had to be sanded down to the final size of 7/32 and 11/32. Otherwise, I am pretty satisified with the products.
|
|
4) Submitted by
Chuck Caranna, from Columbus, OH
on 12/6/2010
Customer Rating: 
The diameters of the finished axles is not always consistent and required some final fitting. This seems to be a relatively recent problem as I never had this in the past.
|
|
5) Submitted by
Paul Skarstad, from Plymouth, MN
on 10/2/2012
Customer Rating: 
I use quite a few of the 7/32" size. They are very nice. The only problem I've found is they are usually at nominal diameter or sometimes even a little larger, so they don't fit readily into a 7/32" hole. I've sanded the shanks down sometimes, as others have suggested, but it's easy to get a tapered axle and a sloppy fit that way. The best way I've found to provide clearance when the axle doesn't fit a 7/32" hole is to use a #2 bit. The diameter is nominally 0.221", a couple mils over a nominal 7/32" axle.
|
|
6) Submitted by
Edward D Gladstone, from West Hartford, CT
on 9/13/2009
Customer Rating:
I have been ordering this product for several years. 50 Packages at a time, and have found that, while good, over half of them are over size and need extensive sanding in order to fit.
|
Wood Products 
(0 Items)
